We would like to introduce the benefits of installing the Micromag MM20 on a discharge machining machine as a case study!! The Micromag can filter steel materials from cutting fluids and remove very fine iron particles. By removing these fine particles, the liquid becomes cleaner, which reduces secondary sparks, significantly decreases energy consumption, and minimizes wire breakage, making the process even more efficient. The reduction in wire breakage and secondary sparks has led to a significant increase in the cutting speed of the machine, with test results showing improvements of 17% to 30%.

Introducing a variety of products that align with efforts to achieve the SDGs, highlighting the benefits of the SDGs. Contributing to the enhancement of corporate image and sustainability. ■ Steel Coolant Nozzle - Reduces consumption of cutting oil and coolant by increasing pressure - Can be used semi-permanently due to its metal material compared to plastic and resin - Made of recyclable steel material

From the benefits of the SDGs, we introduce a variety of products that align with efforts to achieve the SDGs. We contribute to enhancing corporate image and sustainability. ■ Coolant Saver / Oil Saver - Contributes to recycling cutting oil and coolant liquid that would otherwise be discarded with chips, reducing waste by up to 90%. - Contributes to reducing the usage of coolant liquid by up to 50%. - Extends the lifespan of cutting oil and coolant liquid. - Easy to install and does not require an external power source.

Introducing a variety of products that align with efforts to achieve the SDGs, highlighting the benefits of the SDGs. We contribute to enhancing corporate image and sustainability. ■ Micromag - Reduces waste from disposable filters and liquid disposal, and recycles iron waste. - Reduces consumption and costs of disposable filters. - Extends the lifespan of cutting oil and coolant. - Easy to install and does not require an external power source.

This is an introduction to Orbital Tool processing examples. We have successfully removed burrs from the back of the tap cleanly!! Burr removal for M6 & Φ10 cross holes. Tool used: Orbital Tool 11000 Machine used: Vertical machining center (Okuma MX-45VA) Rotational speed: 12000 min-1 Feed rate: 800 to 6000 mm/min Please check the following link for the YouTube video and catalog.