<Case Study> Adoption of Ejectors in Rubber Punching Machines

ピアブ・ジャパン

Case Study of Replacing Blower with Ejector as a Vacuum Source [Background] "Space-saving of the equipment is a challenge" The blower currently in use takes up a lot of space, so we received inquiries about a vacuum source that can be installed in a space-saving manner. Additionally, it was necessary to continuously operate the blower even when the equipment was not in use, leading to waste. [Solution][Effect] Please check here for more details. https://www.ipros.jp/catalog/detail/771150

Date and time
Capital
Entry fee

Related product information

Medium-sized ejector "piCLASSIC Si model"
We have adopted the most energy-efficient ejector technology.

【Specifications】 ○ Optimal supply pressure: 0.60 MPa ○ Maximum supply pressure: 0.7 MPa ○ Maximum vacuum level: 75 -kPa ○ Internal volume, vacuum chamber, cartridge 1-2 pieces: 140 cm3 ○ Internal volume, vacuum chamber, cartridge 3-4 pieces: 246 cm3 ○ Internal volume, vacuum chamber, cartridge 5-6 pieces: 353 cm3 ○ Noise level at 40 -kPa and optimal supply pressure: 66-77 dBA ○ Temperature range: -10 to 80 ℃ ○ Materials: PA, Al, SS, NBR (FKM), CuZn ● For more details, please contact us or download the catalog.
Medium-sized ejector "piCLASSIC Pi model"
It demonstrates high operational reliability even with fluctuations in compressed air pressure and at low pressures.

【Specifications】 ○ Optimal supply pressure: 0.30 MPa ○ Maximum supply pressure: 0.7 MPa ○ Maximum vacuum level: 90 -kPa ○ Internal volume, vacuum chamber, 1-2 cartridges: 140 cm3 ○ Internal volume, vacuum chamber, 3-4 cartridges: 246 cm3 ○ Internal volume, vacuum chamber, 5-6 cartridges: 353 cm3 ○ Noise level at 40 -kPa and optimal supply pressure: 65-68 dBA ○ Temperature range: -10 to 80 ℃ ○ Materials: PA, Al, SS, NBR (FKM), CuZn ● For more details, please contact us or download the catalog.
Medium-sized ejector "piCLASSIC Xi model"
It provides high flow at a vacuum level of up to 95 kPa.

【Specifications】 ○ Optimal supply pressure: 0.45 MPa ○ Compressed air consumption: 110–660 NL/min ○ Vacuum flow rate: 350–1700 NL/min ○ Maximum achievable vacuum pressure: 95 kPa ○ Noise level at 40 kPa and optimal supply pressure: 64–69 dBA ○ Temperature range: -10–80 ℃ ○ Materials: PA, Al, SS, NBR (FKM), CuZn ● For more details, please contact us or download the catalog.