• 

  Fine Control Device FCD series(14)

  Aitec's robot hand core misalignment correction unit "FCD series" smoothly slides along the taper surface of the counterpart, enabling insertion. Please consider Aitec's FCD for your core misalignment issues. 【Increasing Adoption in These Cases】 ■ Cost reduction for equipment using advanced sensors and cameras → Challenge: Advanced tools are highly precise but come with high total costs… ☑ By adopting FCD with a guiding shape, it may be possible to eliminate the need for sensors and cameras in some cases! ■ Reduction of takt time → Challenge: The insertion process while detecting shapes with sensors and cameras takes time… ☑ If insertion can be done following the guiding shape using FCD, it can lead to a reduction in takt time! ■ Response to requests for non-standard mechanisms → I would like movements other than X and Y directions as triggers during insertion… ☑ We will consider possibilities for movements in the X, Y, θ, αβ, and Z directions, within feasible limits! *For more details, please download the product introduction catalog or feel free to contact us.

• 

  Centering unit(3)

  This is a positioning support unit that allows for precise positioning of workpieces and other items at each stage of the manufacturing process in a short time and with simplicity. The "PVXM Series" smoothly slides in all 360° directions to assist with positioning, serving as a labor-saving device. While the product itself does not have its own power source, it is very lightweight and can slide easily, requiring less thrust than traditional positioning power sources. It supports horizontal positioning for items ranging from small to heavy. In addition to the standard type that only allows horizontal movement, a version with a lifting cylinder is also available. 【Features】 - Enables positioning in small spaces - Achieves starting friction resistance of 1/100 to 5/1000 - Numerous successful applications in clean room transport positioning lines, etc. - General environment specifications can be accommodated upon consultation - Customization options available for top plate tapping and horizontal stroke, etc. - Reduces time and effort through positioning in assembly processes by tapering either the hole side or pin side.

• 

  Press-in free guide unit(5)

  The free guide unit is a special unit that automatically corrects positional errors in the press-fitting process of parts.

• 

  Plain Bear Garbage Disposal Type(1)

  This is an introduction to the plain bear garbage disposal type.

• 

  Plain Bear Lifter(5)

  Introducing the air-driven plane bearing lifter.

• 

  Plain Bear Garbage Disposal Type(1)

  Introducing the plain bear garbage disposal type.

• 

  Plain bear press molded products(1)

  This is the most affordable and versatile series of press-molded products in the entire Plain Bear lineup. It accommodates a wide range of specifications from light to heavy loads, and we also offer a waste discharge type that features an original spherical design (PAT.P) in some products.

• 

  Plain Bear Cutting Product Bolt Type(1)

  This is a plain bearing with a bolt mounting type. Inside the plain bearing, there are high-precision main balls arranged with numerous small balls surrounding them. All cutting processing types adopt the original spherical surface (PAT.P), enabling smooth and stable rotational performance regardless of whether it is for upward or downward use, compared to conventional products.

• 

  Plain Bear Cutting Product Bolt Type(1)

  This is a plain bearing with a bolt mounting type. Inside the plain bearing, there are high-precision main balls surrounded by numerous small balls. All cutting processing types adopt the original spherical surface (PAT.P), enabling smooth and stable rotational performance for both upward and downward applications compared to conventional products.

• 

  Plain Bear Cutting Product Flange Type(1)

  This is a plain bearing with a flange mounting type. Compared to bolt-mounted products, it offers a wide range of options suitable for heavy load work. The plain bearing that uses the original spherical design (PAT.P) demonstrates its capabilities especially when the workpiece is heavy.

• 

  Plain Bear Spring Cushion Type(4)

  Introducing the Plain Bear Spring Cushion Type.

• 

  Plain Bear Unit/Table(3)

  This is an introduction to the Plain Bear unit/table.

• 

  Cleanroom-compatible plain bear(5)

  Introducing cleanroom-compatible plain bears.

• 

  Seismic isolation plain bearing(2)

  This is an introduction to plain bearings for seismic isolation.

Product/Service List (48)