Non-Destructive Testing Equipment Exhibition in Oita 24 domestic manufacturers and companies that produce and sell non-destructive testing equipment and devices will gather in Oita! No pre-registration required; admission is free. Please take this opportunity to visit us! For more details, please refer to the information below. Non-Destructive Testing Equipment Exhibition in Oita Date: June 4, 2026 (Thursday) Venue: iichiko General Cultural Center, Atrium Plaza

We would like to inform you about the Ultrasonic Testing Level 2 Autumn Re-certification Exam Preparation Seminar. Pre-registration period: Until May 31 (priority for pre-registrants) *fast pass Official registration period: June 1 to July 15 This is a practical exam preparation seminar for UT Level 1 conducted by the charismatic instructor Shojo, the representative of Sona Engineer, known for high pass rates and enthusiastic guidance. Due to the high popularity of Shojo's passionate seminars, early reservation is recommended. To apply, please confirm the details and directly contact the organizer, Shojo from Sona Engineer. Contact and application: Sona Engineer Tatsuya Shojo (shojo@joy.ocn.ne.jp) Mobile: 090-6972-5183

We would like to inform you about the Ultrasonic Testing Level 1 Autumn Re-Certification Exam Preparation Seminar. Official application period: Until April 24 This is a practical exam preparation seminar for UT Level 1 led by the charismatic instructor Shojo, the representative of Sona Engineer, known for high pass rates and enthusiastic teaching. Due to the high popularity of Shojo's passionate seminars, early reservation is recommended. Please confirm the details and apply directly to the organizer, Shojo from Sona Engineer. Contact and application details: Sona Engineer Tatsuya Shojo (shojo@joy.ocn.ne.jp) Mobile: 090-6972-5183

This is information about the ultrasonic flaw detector handling training course. As of April 15, 2026, there are some openings available. Japan Welding Engineering Center - May 21 (Thursday) to May 22 (Friday) for 2 days, UT Level 1, 12 participants each for R and G types, no personal equipment allowed. - May 26 (Thursday) to May 27 (Friday) for 2 days, UT Level 2, only personal equipment allowed, total of 12 participants. - May 19 (Tuesday) to May 20 (Wednesday) for 2 days, UT Level 2, R type only, 6 participants, no personal equipment allowed. In the practical training course, we aim to provide instruction that closely resembles the actual practical exam, with the goal of having all participants pass. Additionally, for Level 2 candidates, we will also provide guidance on the preparation of NDT instructions. Please note that in the ultrasonic training course, practical instruction will be conducted using the same digital flaw detectors that will be used in the practical exam, so please fill in the type name of the flaw detector (G type or R type) you applied for in the application form for this training course. For information on course fees and other details, please check the Japan Welding Engineering Center website.

This is information about a training session for practical examinations of ultrasonic flaw detectors. It is co-hosted by the Chiba Prefecture Non-Destructive Testing Research Association and the Chiba Prefecture Steel Frame Industry Association, targeting new and recertification examinees for UT Level 1 and UT Level 2. 1. Target Audience: This is limited to individuals planning to take the new and recertification practical examinations conducted by the Japan Non-Destructive Testing Association in the Tokyo area after June 2. 2. Training Venue: 1st Floor Conference Room, Chiba Prefectural Industrial Support Technology Research Institute, 6-13-1 Tendai, Inage Ward, Chiba City 3. Dates: From May 21 (Thursday) to May 29 (Friday), 2026, with lecture hours from 9:00 AM to 4:20 PM. For information on course fees, please check the research association's website or the attached PDF guide.

This is a practical training course for the re-certification examination of Ultrasonic Testing (UT) Level 1 and Level 2 technicians. It is aimed at those taking the re-certification examination from August 21 to 25. The Chiba Prefecture Non-Destructive Testing Research Association and the Chiba Prefecture Steel Frame Industry Association are co-hosting a practical training course for re-certification candidates for NDI certification qualifications UT Level 1 and Level 2, in accordance with JIS Z 2305: 2013, as detailed below. 1. Target Participants: Candidates for the re-certification examination held in the Tokyo area from August 21 to 25. 2. Training Venue: Chiba City, Inage Ward, Tendai 6-13-1 Chiba Prefectural Industrial Support Technology Research Institute, 1st Floor Conference Room. 3. Dates of the Event: From August 5 (Monday) to August 7 (Wednesday), 2024. Training hours are from 9:00 to 16:20. A total of 8 participants for Level 1 and Level 2 combined; however, Level 1 will be conducted over 2 days. For information on participation fees and other details, please check the research association's website or the attached PDF guide.

This spring, a product briefing for the new digital ultrasonic flaw detector UI-29, which began sales, was held on March 19 at the Mitsubishi Electric Kamakura Training Center in Kamakura City, Kanagawa Prefecture, for sales agents. This event was featured in the April 5th issue of Inspection Equipment News published by Sanpo Publishing. With the kind permission of Sanpo Publishing, we are pleased to share the article. The article can be downloaded and viewed from the related materials.

We have been receiving continuous reports of thefts of measurement instruments, such as ultrasonic flaw detectors, stored within the factory. We urge all users to review and confirm their equipment storage management methods and to implement theft prevention measures.

12th Non-Destructive Testing Comprehensive Exhibition July 23 (Wednesday) - 25 (Friday), 2025, 10:00 AM - 5:00 PM Tokyo Big Sight, East Exhibition Hall Admission Fee: Free (Registration required) Organizers: Japan Non-Destructive Testing Industry Association Japan Management Association Main Exhibits New Product: Ultrasonic Flaw Detector UI-29 Portable TOFD Equipment, along with demonstrations and introductions of exhibits.

The latest model UI-29 of the digital ultrasonic flaw detector from Rydian Shonan Electronics will be released this spring. We have uploaded the latest information about this developed product, so please take a look.

A preparatory seminar for the re-certification practical exam for Level 2 ultrasonic testing, which you applied for in October 2024 and is scheduled for late February next year, will be held by instructor Shojo from Sona Engineer at the Polytech Center Kansai (Settsu City, Osaka Prefecture) from February 1 (Saturday) to February 3 (Monday). For more details, please carefully check the attached materials and contact the organizer directly for inquiries and applications.

Notice of Winter Holiday Closure Thank you very much for your continued patronage. We will be closed during the following period: - December 28, 2024 (Saturday) to January 5, 2025 (Sunday) During this period, inquiries via email will be accepted but will be addressed sequentially after the holiday closure.

We would like to announce the Spring 2025 UT Level 2 New Primary Examination (Written) Preparation Seminar. This is a notice for the UT Level 2 New Primary Examination Written Test Preparation Seminar led by the renowned Sonagen Engineer Shojo, known as a charismatic teacher in UT seminars. Due to the high popularity of Shojo's passionate seminars, we recommend making reservations early. Registration is on a first-come, first-served basis, so please apply as soon as possible. To apply, please download the PDF for the Spring 2025 New Primary Examination (Written) Preparation Seminar, review it, and apply directly to the organizer.

Thank you very much for your continued patronage. We regret to inform you that our company will be closed during the following period: - From Friday, August 9, 2024, to Sunday, August 18, 2024. During this period, we will only accept inquiries via email, and we will respond to them sequentially starting from August 19, when we resume operations.

This is a preparatory seminar for the NDI Autumn Contract Examination (September 21, September 22). It will be held by the Western Japan Branch of the Japan Non-Destructive Testing Association. 1. Venue: L Osaka (Osaka Prefectural Labor Center) 3-14 Kitahama Higashi, Chuo Ward, Osaka City, Osaka Prefecture, 540-0031 TEL: 06-6942-0001 2. Access: 300 meters west from Tenmabashi Station on the Osaka Metro Tanimachi Line and Keihan Electric Railway. 500 meters east from Kitahama Station on the Osaka Metro Sakaisuji Line and Keihan Electric Railway. 3. Date of the event: (UT Level 2) Other examination qualifications will also be conducted. September 7, 2024 (Saturday) Course hours are from 9:00 AM to 5:00 PM, with approximately 12 participants per subject. 4. Items to bring: Course application form (with reception stamp) Level 2 textbook (edited by the Japan Non-Destructive Testing Association) Writing utensils, scientific calculator 5. Application method and deadline, course fee: Please apply using the "Course Application Form" from the Association's website. Application deadline: August 22, 2024 (Thursday), but will close as soon as the capacity is reached. Course fee: Association members: 6,000 yen, Non-members: 8,000 yen.

This is information about a training session for the Ultrasonic Testing Level 1 examination (theoretical part). The Japan Non-Destructive Testing Industrial Association, Eastern Japan Branch, will hold an autumn Level 1 examination training session in Tokyo as detailed below. 1. Training Venue: Japan Non-Destructive Testing Industrial Association 2-8-1 Tomitaka Building, Uchikanda, Chiyoda-ku, Tokyo 101-0047 TEL: 03-5207-5960 FAX: 03-5207-5961 2. Access: 5-minute walk from the west exit of JR Kanda Station 3. Dates: (UT Level 2) Other examination qualifications will also be offered. From September 2 (Monday) to September 3 (Tuesday), 2024, with class hours from 9:30 AM to 4:30 PM. For information on course fees and other details, please check the association's website or the attached PDF guide.

The first and second re-certification exams are scheduled for the end of August 2024. ⚫️ Eligibility for the re-certification exam 　・For those whose qualification is valid until March 31, 2025, they are eligible to take the first re-certification exam (initial). 　　*This applies to those who have applied to take the re-certification exam in April of this year. 　・For those whose qualification is valid until September 30, 2024, they are eligible to take the second re-certification exam. 　　*Eligible candidates are those who failed the re-certification exams conducted in late February and late May of this year. Venue: Polytechnic Center Kansai (Kansai Vocational Ability Development Promotion Center), Settsu City, Osaka Prefecture We are pleased to announce a practical exam preparation seminar conducted by the renowned Sonai Engineer Shojo, known as a charismatic instructor in the UT training course. This seminar will take place over three days from July 30 to August 1. Due to the high popularity of Shojo's passionate seminars, early reservation is recommended. To apply, please download the practical training seminar information PDF below, review it, and apply directly to the organizer. Please note that the application deadline is July 24, 2024 (Wednesday) by 5:00 PM.

We would like to inform you about the Autumn UT Level 2 Academic (1st) Exam Preparation Course. Politec Center Kansai (Kansai Vocational Ability Development Promotion Center), Settsu City, Osaka Prefecture. This is an announcement for the UT Level 2 Academic (1st) Exam Preparation Course led by the renowned Sonai Engineer Shoujou, known as a charismatic instructor in UT courses. This time, the course will be held over a total of 6 days, from July 7th to 9th and July 14th to 16th. Due to the high popularity of Shoujou's passionate courses, early reservation is recommended. Please download the PDF for the practical training course information below, review it, and apply directly to the organizer. The application deadline is until 5 PM on Thursday, July 4, 2024.

This is information about the ultrasonic flaw detector handling training session. As of April 25, 2024, there are openings available. Japan Welding Engineering Center May 15 (Wednesday) to May 16 (Thursday) - 2 days, UT Level 1, 12 participants each for R and G June 4 (Tuesday) to June 6 (Thursday) - 3 days, UT Level 2, 12 participants each for R and G In the practical training session, we aim to provide instruction that closely resembles the actual practical examination, with the goal of having all participants pass. Additionally, for Level 2 candidates, we will also provide guidance on the preparation of NDT instructions. Furthermore, during the ultrasonic training session, practical instruction will be conducted using the same digital flaw detectors that will be used in the practical examination, so please fill in the type name of the flaw detector (G type or R type) you applied for on the application form for this training session. For information on participation fees and other details, please check the Japan Welding Engineering Center website.

This is information about a training session for practical exams on ultrasonic flaw detectors. A practical training session will be held, co-hosted by the Chiba Prefecture Non-Destructive Testing Research Association and the Chiba Prefecture Steel Frame Industry Association, targeting new candidates (those who passed the first exam in the spring of Reiwa 6) and those taking re-exams or re-certification for the NDI certification qualification UT Level 2 in accordance with JIS Z 2305: 2013. 1. Target Participants: Those planning to take the new or re-certification practical exams conducted by JSNDI in the Tokyo area in June. 2. Training Venue: 1st Floor Conference Room, Chiba Prefectural Industrial Support Technology Research Institute, 6-13-1 Tendai, Inage-ku, Chiba City. 3. Dates: From June 3 (Monday) to June 5 (Wednesday), Reiwa 6, with training hours from 9:00 to 16:20. For information on participation fees, please check the research association's website or the attached PDF guide.

We would like to inform you about the practical training course for the new and re-certification (renewal) of Level 2 Ultrasonic Testing (UT) examinations. This is a practical training course for the UT Level 1 examination, conducted by the renowned Sonar Engineer Shojo, who is known for his high pass rates and enthusiastic instruction. Due to the high popularity of Shojo's passionate courses, early reservation is recommended. Please download the practical training course information PDF below, review it, and apply directly to the organizer.

Thank you very much for your continued patronage. We sincerely appreciate it. We would like to inform you that our company will be closed during the following period: - July 26, 2023, to July 30, 2023, and August 10, 2023, to August 15, 2023. Inquiries received via email during this period will be acknowledged, and we will respond to them sequentially after the holiday.

Non-Destructive Testing Comprehensive Exhibition 2023 July 26 (Wednesday) - 28 (Friday), 2023, 10:00 AM - 5:00 PM Tokyo Big Sight, East Exhibition Hall, Hall 5 Admission Fee: Free (Pre-registration required) Organizer: Japan Non-Destructive Testing Industry Association Special Sponsor: Japan Non-Destructive Testing Association Inspection Demonstration with Our Products Remote Condition Monitoring Using Ultrasonic Flaw Detectors - Demonstration of Ultrasonic Axial Force Measurement via Remote Control Various Ultrasonic Testing Devices

Happy New Year I look forward to your continued support this year as well. I sincerely wish for everyone's happiness and further prosperity.

Notice of Winter Holiday Closure Thank you very much for your continued patronage. We would like to inform you that our company will be closed during the following period: - December 29, 2022 (Thursday) to January 4, 2023 (Wednesday) During this period, inquiries sent via email will only be accepted and will be addressed sequentially after the holiday closure.

We would like to inform you about the Autumn UT Level 2 Practical Exam Preparation Course. This event will be held under the auspices of the Osaka Prefecture Steel Construction Industry Cooperative Association. This is an announcement for the UT Level 2 Practical Exam Preparation Course led by the renowned Sonai Engineer Shojo, known as a charismatic instructor in UT training. Among the 40 participants who passed the secondary exam in the spring of the fourth year, 31 achieved a pass rate of 78%, which is significantly higher compared to the average pass rate of candidates (below 30%). Due to the high popularity of Shojo's passionate courses, early reservation is recommended. In order to maintain a focused and dense content, the capacity for this course is limited to 35 participants, and it seems that a considerable number of reservations have already been made. As it operates on a first-come, first-served basis, please apply as soon as possible. To apply, please download the practical training course announcement PDF below, review it, and apply directly to the organizer. Please note that the application deadline is Tuesday, October 25, 2022, by 5:00 PM.

Thank you very much for visiting our booth at the 'JIMA2022 Comprehensive Inspection Equipment Exhibition' held at Tokyo Big Sight from September 14 to 16, 2022. You can find detailed information about the products we exhibited on the following website. 【Exhibited Products】 - Axial Force Control Fastening System SONARFORCE - Ultrasonic Bolt Axial Force Gauge UI-27AF - UI-27 Remote Control Function - Ultrasonic Flaw Detector UI-S9/UI-R1 We appreciate the valuable feedback we received at the venue. We will utilize the feedback to improve our future products and services. We look forward to your continued support of RYOSHO.

JIMA2022 11th Comprehensive Inspection Equipment Exhibition September 14 (Wednesday) - 16 (Friday), 2022, 10:00 AM - 5:00 PM Tokyo Big Sight, West Hall 1-2 Admission Fee: Free (Registration Required) Organizer: Japan Inspection Equipment Manufacturers Association Main Exhibits Demonstration of Ultrasonic Axial Force Measurement Control Device Remote-Compatible Flaw Detection Demonstration Various Ultrasonic Flaw Detection Devices

Thank you very much for your continued patronage. We would like to inform you that our company will be closed during the following period: - From Saturday, August 6, 2022, to Sunday, August 14, 2022. Inquiries received via email during this period will be accepted, but we will respond to them sequentially after we resume operations.

We have uploaded a technical introduction video of the direct axial force control system that enables fastening control through axial force. This technology has been developed in collaboration with Honda Motor Co., Ltd. In mass production, bolt fastening has relied on torque or angle methods, but we have developed a new technology that allows fastening at the required bolt axial force while directly measuring the axial force. This technology enables bolt fastening with reduced axial force variation in the mass production process. It is expected to be used in various fields and applications. We have also set up a demonstration unit at our factory. If you have any questions or requests, please feel free to contact us through the form.