SANKO ELECTRONIC LABORATORY CO.,LTD. Official site

Probe-integrated model for iron base only.

■Dedicated model for iron base ■Successor to UNIBOY-M *For more details, please refer to the PDF document or feel free to contact us.

Portable probe-integrated film thickness gauge

For more details, please refer to the PDF document or feel free to contact us.

Measuring the coating thickness on metal and non-metal substrates.

Measurement Method: Ultrasonic Echo Reflection Method Measurement Range: 10 to 7500μm (when sound speed is 2375m/s) LCD Display: 160×160 pixels, with backlight Minimum Measurement Area: 11mm Minimum Resolution: 0.1μm Measurement Accuracy: ±(1μm + 1% of reading) Additional Features: Memory function, statistical calculation function Measurement Value Memory: Approximately 250,000 points (total) Data Output: IrDA 1.0 (optional: USB, RS-232) Operating Temperature: 5 to 50°C (must not condense) Power Supply: 4 AA batteries Dimensions: Main Unit 89 (W) × 153 (H) × 32 (D) mm Sensor φ25 × 60mm Weight: Main Unit 310g, Sensor 80g

Display the quantity of "appearance" quantitatively.

〇 Display Method: 2.4-inch LCD digital QVGA color TFT, 320×240 pixels 〇 Measurement Range: 60°: 0-1000 GU (SG-6), (SG-268); 20°: 0-2000 GU, 85°: 0-160 GU (SG-268) 〇 Measurement Target Dimensions: 60°: 8×16 mm (SG-6), (SG-268); 20°: 10×10 mm, 85°: 4×55 mm (SG-268) 〇 Reproducibility: ±0.2 GU (0–10 GU); ±0.5 GU (10–100 GU); ±0.5 GU (100–2000 GU) 〇 Power Supply: 2 AA batteries (1.5V) (approximately 50,000 measurements possible) USB (connect to PC) 〇 Memory: Up to 2,500 batches, 40,000 reading values 〇 Operating Temperature Range: -10 to 50°C, relative humidity 0 to 85% 〇 Dimensions and Weight: 155 (W) × 68 (H) × 50 (D) mm, 534 g (including batteries) 〇 Accessories: Calibration standard plate, wrist strap, storage case, (for model 268 only; SANKO_LINK software, USB cable)

You can easily and quickly check the feasibility of anti-corrosion coatings for bridges, ships, steel towers, plants, etc. (in accordance with JIS Z 0313) PSPC compliant.

- The surface salinity concentration is directly read in three ways: water-soluble salinity concentration display, sodium chloride concentration display, and electrical conductivity display. - By fixing the measurement cell to the measurement target and simply injecting the measurement water (pure water), the surface salinity concentration can be measured. - Unlike the press method, it does not dirty the surface with adhesives (the measurement object is a magnetic flat plate).

A detector effective for pinhole detection and defect inspection of thin insulating films on electronic devices and precision machinery.

【Specifications】 ■ Method: DC high voltage discharge type ■ Detection voltage: 0.3 to 5 kV ■ Alarm method: Lamp, buzzer ■ Power supply: AC 85V to 264V, 50/60Hz, 10VA ■ Operating temperature: 0 to 40℃ (no condensation) ■ Dimensions and weight: 320 (W) × 230 (D) × 70 (H) mm, approximately 3.2 kg *For more details, please refer to the PDF document or feel free to contact us.

Made-to-order product! Wet electric resistance method pinhole detector with low detection voltage that does not damage the coating.

【Lineup】 ■PH-1S ■PH-20 *For more details, please refer to the PDF document or feel free to contact us.

A pinhole detector suitable for testing the degree of aging due to the extraction of plasticizers from coatings, resins, etc.

【Example of Specifications】 ■ Method: DC High Voltage Resistance Method ■ Test Voltage: 500V/1000V (switchable) ■ Resistance Range ・ 500V: 1–100MΩ, 1000V: 1–100MΩ (digital display) ■ Alarm Method: Lamp, Buzzer, Contact Output ■ Alarm Setting: Resistance value via digital switch ■ Power Supply: AC100V, 50/60Hz, under 30W ■ Dimensions and Weight: 260 (W) × 99 (H) × 230 (D) mm, 2.8kg * For more details, please refer to the PDF document or feel free to contact us.

We can test conductive coatings! Introducing the wet-type pinhole detector.

【Example of Specifications (Excerpt)】 ■Detection Method: Wet Probe Sensing Method ■Alarm: LED Display, Buzzer ■Secrecy 　・Main Unit: Waterproof Structure 　・Probe: Waterproof Structure ■Power Supply: Dedicated AC Adapter (AC90–264V, 50/60Hz) ■Operating Environment 　・Temperature: 0–40°, Relative Humidity 80% or less ■Dimensions and Weight 　・Main Unit: 165 (W) × 90 (H) × 165 (D) mm, 1.4kg 　・Probe: φ20 × 230 (L) *For more details, please refer to the PDF document or feel free to contact us.

Rapid automatic detection of defects using high-voltage discharge! Non-contact pinhole detector.

【Example of Specifications】 ■Container dimensions: φ60×125mm ■Capacity: 60 bottles/min ■Detection voltage: 5–30kV, DC high voltage discharge type ■Good/Bad discrimination: Defective products are automatically ejected outside the line ■Container supply: Continuous alignment supply via conveyor ■Container discharge: Continuous alignment discharge via conveyor *For more details, please refer to the PDF document or feel free to contact us.

Pinhole inspection can be performed electrically and non-destructively! DC high voltage discharge pinhole detector.

【Specifications (Excerpt)】 <151C> ■ Method: DC high voltage discharge type ■ Detection voltage: 151C 5–15kV ■ Alarm method: Main unit lamp, buzzer ■ Power supply: AC100–240V 50/60Hz ■ Dimensions and weight: 280(W) × 150(H) × 230(D) mm, excluding protrusions, approximately 7kg (main unit) *For more details, please refer to the PDF document or feel free to contact us.

A pinhole detector suitable for detecting semi-defects! It allows for a long code extension.

【Specifications (Excerpt)】 ■ Method: DC high voltage discharge type (with sensitivity adjustment function) ■ Detection voltage: 1 to 25 kV ■ Power supply: AC 100V to 240V, 50/60Hz, 100VA ■ Alarm method: Lamp, buzzer ■ Dimensions and weight: 250 (W) × 150 (H) × 350 (D) mm, 7.5 kg (main unit) *For more details, please refer to the PDF document or feel free to contact us.

High output! A high-output type pinhole detector that can also accommodate rubber lining.

【Specifications (Excerpt)】 ■ Method: Low-frequency high-voltage pulse discharge type ■ Detection voltage: 5–30kV (peak value) ■ Alarm method: Body lamp, buzzer ■ Power supply: Built-in Ni-Cd battery ■ Charging power supply: AC100V, 50/60Hz, 30VA ■ Dimensions and weight: 400 (W) × 200 (H) × 290 (D) mm, approximately 6.5kg *For more details, please refer to the PDF document or feel free to contact us.

Compact, simple, and affordable! We introduce a pinhole detector suitable for partial inspections and repair inspections.

【Specifications (Excerpt)】 <Hollister 5N> ■ Method: Low-frequency high-voltage pulse discharge type ■ Detection voltage: 1 to 5 kV (peak value) ■ Built-in power source: NiMH (Nickel-Metal Hydride) battery (with battery check function) ■ Charging power source: AC100V, 50/60Hz, 80VA ■ Usage time: Approximately 5 hours (at maximum output voltage) ■ Alarm method: Lamp, buzzer ■ Target coating thickness: Less than 1mm ■ Operating temperature range: 0 to 40°C (must not condense) ■ Dimensions: 70 (W) × 120 (H) × 220 (D) mm ■ Body weight: 1.1kg *For more details, please refer to the PDF document or feel free to contact us.

Introducing pinhole detectors weighing 5.1kg and 4.1kg! They come with an ABS-made telescopic probe.

【Specifications (Excerpt)】 <TRS-70> ■ Method: Low-frequency high-voltage pulse discharge type ■ Detection voltage: 1 to 7 kV (peak value) ■ Power supply: AC100V, 50/60Hz, 20VA ■ Alarm method: Lamp, buzzer ■ Target coating thickness: 1mm or less ■ Operating temperature range: 0 to 40℃ (must not condense) ■ Dimensions: 370(W) × 190(H) × 150(D) mm ■ Main unit weight: 4.1 kg *For more details, please refer to the PDF document or feel free to contact us.