SANWA CREATION Co.,Ltd. Official site

This is a stack pin (positioning pin) that is driven in when fixing the entry board and backup board (bake board) before drilling the substrate. The outer diameter ranges from Φ1 and the total length can be approximately 8L. Chamfers can also be added to both sides of the pin. Precision: φ±0.005 (higher precision tolerances are also possible), outer diameter surface roughness can be less than Ra0.1. Material: SKH51 (HRC60 or higher), SUS materials, carbide, etc. We can manufacture from small lots, so please feel free to consult with us.

【Thin-Walled Machining Case Study】 Introduction to SUS316. 【Case Overview】 ■ Processing: Machining Center ■ Material: SUS316 ■ Wall Thickness: 0.15mm ■ Application: Injection of chemicals, etc. *For more details, please refer to the related links or feel free to contact us.

We would like to introduce the ultra-hard alloy micron pins handled by Sanwa Creation Co., Ltd. These are ultra-fine pins with an outer diameter of less than φ0.1mm, manufactured using fine grinding technology, and made from ultra-hard alloy and zirconia ceramics. They have a proven track record in applications such as discharge machining electrodes for nozzle holes in diesel engine fuel injection systems and punches for ink nozzles in inkjet printers. 【Specifications】 ■ Material: Ultra-hard alloy, zirconia ceramics ■ Dimensional Standards ・Outer Diameter (φD): φ0.05mm to φ0.10mm ・Total Length (L): up to 350mm *For more details, please refer to the related links or feel free to contact us.

Sanwa Creation Co., Ltd. offers diamond (PCD) work rests for centerless grinding. Our diamond blades (compact blades) have a replacement cycle that provides 300 times the wear resistance compared to carbide work rests. Additionally, we also support regrinding and repair of the diamond parts, allowing for the recycling of the base material. 【Features】 ■ 300 times the wear resistance compared to carbide work rests ■ Support for regrinding and repair of diamond parts ■ Recycling of the base material is possible ■ Dimension standards ・Total length: up to 800mm ・Thickness: as thin as 0.5mm～ *For more details, please refer to the related links or feel free to contact us.

We would like to introduce the "Irregular & Eccentric Pins" handled by Sanwa Creation Co., Ltd. Oval, square, triangular to polygonal, eccentric, etc.! We can manufacture them as custom orders. We respond to various shape needs such as oval, square, triangular to polygonal, and eccentric. In addition to being used as core pins for molds and pilot pins for press dies, the triangular prism type is also used as reamers. Furthermore, to effectively utilize the internal space of molds due to miniaturization, we sometimes create punches with the tip eccentrically offset from the shank. 【Specifications】 ■ Material: Carbide, zirconia ceramics, SKH ■ Standards: Custom-made to your desired size ■ Dimension standards ・Shank diameter: φ2 to φ12 ・Total length (L): up to 150L *For more details, please refer to the related links or feel free to contact us.