サンワ・エンタープライズ Official site

1000 items with selectable materials, shapes, and sizes. Small fittings for soft tubes.

Features - A wide variety of "sizes," "shapes," and "materials" - Multiple barb styles can be selected according to the material and characteristics of the tube Specifications - Shapes: Straight, Tee, Elbow, Y, Multi, Panel Mount, Reducer Tee, Reducer Panel Mount, Plug, Screw Mount, Reducer Straight, Reducer Elbow - Sizes: 1/16” (1.6mm), 3/32” (2.4mm), 1/8” (3.2mm), 5/32” (4.0mm), 3/16” (4.8mm), 1/4” (6.4mm), 5/16” (8.0mm), 3/8” (9.5mm), 1/2” (12.7mm), 5/8” (16.0mm), 3/4” (19.4mm), 1” (25.4mm) - Materials: Polypropylene, Polycarbonate, Polyvinylidene Fluoride, Nylon

This is a lure fitting manufactured in accordance with ISO594-1 and ISO594-2 standards.

Specifications - Size: 1/16” (1.6mm), 3/32” (2.4mm), 1/8” (3.2mm), 5/32” (4.0mm), 3/16” (4.8mm), 1/4” (6.4mm), 5/16” (8.0mm) - Material: Polypropylene, Polycarbonate, Polyvinylidene fluoride, Nylon, ABS - Rotary Mail: This is a "twist-back type" lure. By dividing it into two parts—one for sealing during assembly and the other for holding—it reduces the twisting on the tube that was impossible with conventional lures.

It is an on-off switching valve that controls the flow paths of liquids or gases in one direction, three directions, and four directions.

Specifications - Material: Clear polycarbonate, colored polycarbonate, natural nylon - Shape: One-way, three-way, and four-way - DEHP-free - Diverter arrows clearly indicating the flow path

It is possible to achieve a time reduction of 18 to 24% compared to the conventional emission time.

Three types of connection are available. ■ Barb type ■ Flange type ■ Dip tube Specifications ・ Material: Polyethylene ・ Barb size: 1/8 inch (3.2 mm) to 1 inch (25.4 mm)

Plastic fitting made for sanitary flanges.

Product Line for Bioprocessing ■ Sanitary Fittings ■ Sanitary Tee ■ PharmaLock Clamp ■ Bio Clamp ■ Bio Valve ■ PharmaLock Tube Clamp Specifications - Material: PP, PVDF - Size: 1-1/2 inches (38.1 mm) 3/4 inches (19.0 mm) Compliant with ASME-BPE standards - Sterilization possible by EtO, autoclave, or gamma radiation

This is a super small valve equipped with a silicone-made sealed septum seal.

Specifications - Material: PC, PES - DEHP and latex free - Can be sterilized by EtO or gamma rays

It is a super compact check valve equipped with various connection shapes.

Specifications - Material: < Housing > - Methyl methacrylate acrylonitrile butadiene styrene (MABS) - Styrene acrylonitrile (SAN) - Polycarbonate < Diaphragm > Silicone (material free of phthalates and latex) - Compliant with USP Class 6 and ISO 10993 - DEHP and latex-free silicone diaphragm - Can be sterilized with EtO or gamma rays

It is a system that transfers liquid without exposing it to the outside air through a double-configured check valve.

Specifications - Material: Main body PC, diaphragm silicone - Cracking pressure: 14 kPa to 34 kPa - Complies with USP Class 6

It is suitable for downstream processes such as filling multiple bags from large containers or bags.

Specifications - The wetted parts are made of polycarbonate with strength and high transparency. - Materials: Body & Flow Selector: Gamma-stabilized polycarbonate Internal Spring: SUS316 Gasket: Platinum-cured silicone - Compatible Tube: 3/8 inch (9.5 mm) - Operating Pressure: 15 psi (1.0 bar) - Materials meet USP Class VI and ISO 10993 standards.