昭電 Official site

SPD for High-Density Wiring Systems (for Telephone) UCP Series

Tyco Electronics Corporation This SPD is optimal for high-density wiring systems compatible with the UCS Universal Connection System and the Krone LSA-plus module. ■ Features ● High-performance SPD compatible with direct lightning waveforms (10/350μs 2.5kA) ● Compatible with telephone lines and various communication lines ● Plug-in module for high-density wiring systems ● Fault indication function (only for UCP-SD) ■ Installation Method After attaching the grounding bar to the wired UCS disconnection magazine and LSA-plus module, simply install this product to connect it to the line. (It has a no-break function that prevents signal interruption during installation and removal.) ■ Fault Indication Function (only for UCP-SD) When this product fails due to lightning surge current exceeding its current rating, the fault indication window changes from white to red to indicate a fault. This minimizes the risk during a fault.

Packed with essential knowledge about earthquakes! Introducing the necessity and methods of earthquake preparedness!

[Equipment, Devices, Systems, Construction] Comprehensive Catalog From short periods to long periods! Compact seismic isolation devices that respond to seismic motions of all periods Seismic isolation devices for racks

Lightning damage prevention: Direct lightning waveform (10/350μs 2.5kA) compatible SPD for ITV and surveillance cameras.

Lightning surge protectors that protect equipment from surge voltage and current entering coaxial cables for ITV, surveillance cameras, and data transmission devices. ■□■Features■□■ ■CSA-NT - By combining a three-pole arrester and a neutral line coil, it improves protection characteristics and absorbs transmission noise. - Supports not only conventional induced lightning waveforms of 8/20μs but also direct lightning waveforms of 10/350μs. - Rail mountable (35mm wide rail). - Ideal for protecting ITV coaxial lines with low withstand voltage. - Optimal for transmission methods where DC power is superimposed on coaxial lines. ■CSA-HS - Combines a three-pole arrester and semiconductor elements to enhance protection characteristics. - Supports not only conventional induced lightning waveforms of 8/20μs but also direct lightning waveforms of 10/350μs. - Rail mountable (35mm wide rail). ■For additional information, please refer to the catalog download. If you would like a catalog, please contact us through the request for materials.

Lightning damage countermeasures for coaxial data transmission equipment protection SPD

A new type of lightning arrester for coaxial cables, composed of a coaxial connector and a high-performance gas arrester. ■□■Features■□■ ■Easy to install by simply connecting the coaxial cable and equipment with the connector. ■Compact yet has a high impulse current capacity. ■Transmission performance boasts a wide frequency range, with excellent VSWR and insertion loss characteristics. ■Types: - Display type: Mainly for images, data, and ITV. - Feeder type: Mainly for wireless use, can be incorporated into various systems. ■For additional information, please refer to the catalog download. If you would like a catalog, please contact us via the inquiry form.

Lightning damage prevention Thunder Blocker for LAN systems

SPD to protect network devices compatible with Category 5e (1000Base-T, 100Base-TX) from lightning damage ■□■Features■□■ ■Compatible with CAT5e (1000Base-T, 100Base-TX) for use in high-speed network lines ■Supports PoE, allowing power supply through UTP cables ■Adopts high-capacity components to withstand direct lightning waveforms (10/350 JIS Category D1) ■Compliant with Ministry of Land, Infrastructure, Transport and Tourism specifications ■Ideal for lightning protection of not only network devices like computers and servers but also security devices such as surveillance cameras ■Additional information can be viewed by downloading the catalog. If you would like a catalog, please contact us through the document request.

Lightning damage prevention dedicated power supply thunder blocker

Thunder blocker specifically designed for power supply lightning protection for all devices! A compact power supply thunder blocker compatible with copiers and audio equipment. ■□■Features■□■ ■Compact and lightweight for power supply use ■Total protection possible by using in conjunction with communication surge protectors ■Widely compatible with home electronic devices such as copiers and audio equipment ■For more details, please contact us.

Lightning damage prevention: Thunder blocker for internet environments

Lightning protection for your internet environment! Thunder blocker compatible with computers and multifunction phones ■□■Features■□■ ■ Compact and lightweight yet highly reliable outlet type ■ Compatible with a variety of devices, from computers to multifunction phones ■ For more details, please contact us.

Impulse current waveform 8/20μs compatible surge counter

Surge Counter Compatible with Impulse Current Waveform 8/20μs ■□■Features■□■ ■Supports high-frequency waveform of impulse current 8/20μs, achieving a minimum detection operating current of 300A ■By separating the lightning surge current detection CT and counter, it can be installed in any location ■Power is detected by the CT for the surge counter, eliminating the need for a startup power supply ■For more details, please contact us.

Lightning damage prevention Internet environment Compact Thunder Blocker

Thunder protection for your internet environment! A compact type thunder blocker compatible with computers and multifunctional telephones. ■□■Features■□■ ■ Compact and lightweight yet highly reliable outlet type surge protector ■ Compatible with various devices from computers to multifunctional telephones ■ Can be fixed to the desk side with a magnet ■ Comes with a 1.6m power cord ■ Equipped with a master power switch ■ For more details, please contact us.

A compact seismic isolation device that can be freely adapted to existing locations.

A compact seismic isolation device that can be freely adapted to existing locations. ■Features■ ■ With a standby mode that has no start mechanism, it can respond immediately to seismic motion, demonstrating significant effectiveness. ■ No construction is required; it can be implemented simply by placing it, and there is no need for a reset after an earthquake. ■ Easy installation during relocation or equipment expansion, and connection is possible. ■ Low friction resistance enables smooth damping. ■ Prevents twisting of the main body. ■ Prevents the main body from lifting. ■ Total thickness is only 90mm. ■ For more details, please contact us.

Earthquake measures PA seismic frame

In computer rooms and communication equipment rooms, earthquake measures are particularly necessary. We provide seismic performance to free access floors to prevent shifts and collapses of the floor, protecting both the equipment and the free access floor! Directly fix the frame to the floor slab with anchors! PA-type seismic frame ■□■Features■□■ ■By fixing the seismic reinforcement frame (V-shaped members) installed between the columns to the floor slab with anchors (Hilti), this method transmits horizontal forces to the floor surface. ■Ideal for communication equipment rooms, computer rooms, and electronic calculation rooms. ■Installation work Just like general free access floors, power and signal cables can be wired, and installation is possible even while the equipment is in operation. ■For more details, please contact us.

Earthquake measures PB-type seismic frame

Earthquake measures are particularly necessary in computer rooms and communication equipment rooms. By providing seismic performance to the free access floor, we prevent shifting and collapsing of the floor, protecting both the equipment and the free access floor! We interconnect the columns to fix them mutually, linking the entire floor like a single slab! PB-type seismic frame ■□■ Features ■□■ ■ The columns are mutually fixed with horizontal bracing members, connecting the entire floor like a single slab and dispersing horizontal forces. ■ Seismic reinforcement is possible for existing free access floors without moving or stopping equipment, and without damaging the slab. ■ Installation work can be done similarly to general free access floors, allowing wiring for power and signal cables, and can be laid even while the equipment is operational. ■ Due to its unit structure, it can be easily installed on existing floors. ■ For more details, please contact us.

Earthquake measures SD floor (SD method for equipment fixation)

Earthquake measures are particularly necessary in computer rooms and communication equipment rooms. We provide seismic performance for free access floors to prevent shifting and collapsing, protecting both the equipment and the free access floor! It functions as an integrated duct floor, securely fixing the floor and equipment to the building's floor with the SD-type equipment fixation method. ■□■ Features ■□■ ■ Since it functions as an integrated duct floor, it transmits the combined forces acting on the free access floor during an earthquake, as well as the forces acting on the equipment fixation brackets trying to topple or move the equipment, to the building floor slab through the seismic frame. ■ Effective when anchor fixation is not possible. ■ Installation work can be done similarly to general free access floors, allowing wiring for power and signal cables, and can be installed even while the equipment is operational. ■ Due to its unit structure, it can be easily installed on existing floors. ■ For more details, please contact us.

Earthquake measures: duct floor (uplift prevention panel)

Earthquake measures are particularly necessary in computer rooms and communication equipment rooms. By providing seismic performance to the free access floor, we prevent shifts and collapses of the floor, protecting both the equipment and the free access floor! Lock the panels to secure the evacuation routes on the floor! Anti-lifting panels. ■□■ Features ■□■ ■ Anti-lifting panels to secure evacuation routes on the floor. ■ Provides significant safety benefits for operators in more severe situations during disasters, facilitating their evacuation. ■ Locks can be applied with simple tools to prevent the panels from lifting. ■ Installation work can be done similarly to general free access floors, allowing for wiring of power and signal cables, and can be installed even while equipment is operational. ■ Due to its unit structure, it can be easily attached to existing floors. ■ For more details, please contact us.

Earthquake measures: Magic bands for OA equipment and peripheral devices.

In earthquake measures for information systems, while the main equipment is often addressed, the measures for computers and furniture tend to be overlooked. At Showden Corporation, to address this issue, we have prepared seismic devices for OA equipment and furniture that can be easily installed with simple modifications on-site. We use materials that do not damage the target equipment and can accommodate layout changes freely. Secure small devices within racks with bands to prevent movement and falling during an earthquake! Magic Band ■□■Features■□■ ■Belt for preventing movement of small devices such as modems and hubs within racks ■Can be cut to the desired length for use and easily adjusted for installation ■Velcro style allows for easy attachment and removal ■Length can be adjusted even if the dimensions of the equipment change, allowing for repeated use ■For more details, please contact us.

Earthquake measures: Leveler holder for cabinets and printers

In earthquake measures for information systems, while the main equipment is often addressed, the measures for computers and furniture tend to be overlooked. At Showden Corporation, to address this issue, we have prepared seismic devices for OA equipment and furniture that can be easily installed with simple modifications on-site. We use materials that do not damage the target equipment, allowing for flexible responses to layout changes. Stoppers for preventing movement and tipping of cabinets and printer equipment supported by levelers. ■□■ Features ■□■ ■ Prevents horizontal movement by increasing the installation area of the leveler. ■ Easy to install as it simply needs to be inserted under the leveler. ■ Can also be used as a movement prevention holder for small casters. ■ For more details, please contact us.

Adopting a plugin structure with high market demand! Launching the lightning damage prevention product, communication and signal SPD 'SG Series'!

In recent years, the demand for the 'SIG series (Shoden Manufacturing)' has surged as a lightning protection measure for weather observation devices in fire alarm systems and solar power generation systems. As a successor model, we have enhanced usability by adopting a plug-in structure, which was highly requested by the market. The impulse durability meets JIS categories D1 and D2, and it also complies with the specifications for public building construction supervised by the Ministry of Land, Infrastructure, Transport and Tourism.

You can download a collection of countermeasure examples for different power generation systems for free! Protect outdoor solar power systems from lightning damage!

【Examples of Lightning Damage Countermeasures by Power Generation System】 ◆ [Large-scale] Solar Power Generation System ◆ [Medium-scale] Solar Power Generation System ◆ Wind Power Generation System ◆ Reasons Why Showden is Chosen for BCP of New Energy Facilities - One-stop service integrating information communication and disaster prevention technologies - Strong capabilities in joint ventures with diverse technologies and extensive track record - Nationwide expansion of bases, providing one-stop support for multiple projects - Proposals tailored to the type and scale of new energy facilities - Providing reliable products with state-of-the-art testing equipment - Offering rapid maintenance services 24/7, 365 days a year 【For more details, please download the catalog or feel free to contact us】