島貿易 Official site

For applications in beverages, aquaculture, water supply and drainage, cooling water, boiler water, and biofouling. A laboratory for conducting operational training and demonstrations is also available.

【Features】 The treated water is uniformly irradiated with ultraviolet light. Due to the use of high-strength quartz tubes and high-output, short medium-pressure UV lamps, handling during maintenance is easy. By continuously monitoring the irradiation amount with two sensors, it is possible to automatically control the necessary UV dosage. It continuously records essential data during operation, such as UV transmittance, treated water volume, water temperature, UV irradiation amount, and lamp intensity. 【Specifications】 Lamp used: Medium Pressure High Intensity UV Lamp Lamp capacity: 1 to 4.2 kW per unit Maximum treatment capacity: Depends on the transmittance of the treated water and the required irradiation amount. *For more details, please refer to the product catalog or contact us.

Reproducing rolling contact fatigue (RCF) due to pitching under lubricated/non-lubricated conditions.

【Specifications】 Load: 100–1250N Speed: 0–4m/sec (depending on slip rate) Temperature: Room temperature to 135℃ 【Standard Test】 Pitching Test

Automatically measures the traction (friction) coefficient in boundary lubrication, mixed lubrication, and elastohydrodynamic lubrication.

【Specifications】 Load : 0 to 75N Speed : -4 to 4m/s Slip Rate : -10,000 to +10,000% Temperature : Room temperature to 150℃ 【Standard Test】 Measurement of traction coefficient 【Options】 Measurement of tribofilm on test specimen Measurement of electrical resistance at contact area Low load (soft contact) test Pin-on-disk test Reciprocating sliding test

It measures viscosity under HTHS (High Temperature High Shear) conditions with high temperature accuracy.

【Specifications】 - Shear rate: 10^6 to 10^7/s - Temperature: 40 to 150°C 【Standard Test】 - Viscosity measurement

The oil film thickness in the elastic fluid lubrication state is measured using the principle of optical interference.

【Specifications】 - Film thickness range: 2 to 1,000 nm - Load: 2 to 50 N - Temperature: Room temperature to 150°C 【Standard Tests】 Oil film thickness measurement Traction coefficient measurement 【Options】 - Oil film thickness distribution measurement

Establish a parts and consumables storage to strengthen the after-sales service system. 【Conduct operational training and demonstrations!!】

3rd Floor, Shima Building, 2-12-14 Ginza, Chuo-ku, Tokyo 104-0061 TEL: 03-3546-3135 *For more details, please contact us.*