Introduction to the Quick Curing Oven for Coating Drying Test Equipment
Optimal heat source! Testable with four heat sources. We propose suitable heating equipment for work using gas/electric/hybrid heat sources! Thorough testing can be conducted together with our customers.
QCO Test Equipment ■ You can test the painting and drying processes in an environment close to an actual production site. Temperature measurements of the workpiece can be conducted, allowing for the derivation of optimal heating patterns by changing the heat source. The equipment can accommodate large and long workpieces, so please feel free to consult us about your requirements. ■ Gas hot air & jet heating zone With a jet stream of 350°C and 50m/sec, it can handle not only painting and drying but also other heating applications. Hydrogen combustion is also possible, allowing for the evaluation of its impact on products. Load capacity: 800W x 800D x 1400H (maximum) 50kg/hanger (maximum) Conveyance method: Trolley conveyor (hanger pitch 300mm) Conveyance speed: 1 to 10 m/min Painting booth: No-pump type Drying furnace: Gas infrared burner (bottom 23kW x 2, sides 35kW x 2, Max. 800°C) Gas far-infrared panel (116kW x 1 Max. 350°C) Gas hot air & jet heating (233kW x 1, Max. 350°C, 50m/sec) *1 Electric infrared heater (bottom 11kW x 2, sides 17.5kW x 2, Max. 800°C) *1 Please consult us regarding hydrogen combustion.
basic information
For inquiries regarding test consultations or the use of testing facilities, please contact us through this page. Shoei Manufacturing Co., Ltd. - Thermal Technology Research Institute (within Horyuji Center) - Industrial Furnace Division Tel. 0743-57-5630 Fax. 0743-57-5615 〒 639-1065 520 Kasame, Ando-cho, Ikoma-gun, Nara Prefecture
Price range
Delivery Time
Model number/Brand name
QCO
Applications/Examples of results
Work painting test using painting equipment - Painting in the painting booth - Measurement of work temperature - Drying test - Development of decarbonization/low-carbon technology - Development of carbon-neutral technology - Energy-saving verification Jet heating test - Heating test with high-speed jet flow at Max. 350℃ & 50m/sec - Product test using hydrogen combustion exhaust gas
catalog（8）
Download All Catalogs
News about this product（2）
-
【Exhibition Information】Coating Japan - High-Performance Materials Week - Paint and Coating Equipment Exhibition
We are pleased to announce that Shoei Seisakusho, a manufacturer of gas burners and industrial furnaces, will be exhibiting at the "Coating and Painting Equipment Exhibition" held at Makuhari Messe. We will showcase a lineup of heat-generating devices for painting drying equipment, as well as deodorization devices (VOC removal devices) in a panel display. We will also introduce examples of energy-saving equipment and decarbonization items using hydrogen gas burners. ---------------------- The Coating and Painting Equipment Exhibition - COATING JAPAN - is a specialized exhibition where functional coatings, painting equipment, and surface treatment technologies are all presented together. ----------------------
-
Online seminar on the utilization of the latest thermal fluid analysis software and turbo design software.
Wavefront Inc. will hold an online seminar titled "Utilization of the Latest Thermal Fluid Analysis Software and Turbo Design Software"! In recent years, various initiatives have been undertaken to achieve a carbon-neutral society. For example, in the automotive industry, with the further promotion of electrification, energy conservation, and efficiency, there is a growing demand for thermal fluid analysis, including cooling simulations for electric motors (water cooling/oil cooling) and oil agitation simulations for planetary gear mechanisms used in EVs/HEVs. In this seminar, we will introduce the thermal fluid analysis software "Simerics MP+" specialized for these complex simulations! Additionally, the construction of small hydropower plants contributing to sustainable renewable energy supply is becoming increasingly active. Since installation locations are not limited as long as there is a drop and flow, many potential development sites remain, and many companies are entering this field. We will also introduce the turbo design software "CFturbo," which serves as a stepping stone for those involved in small hydropower generation to increase turbine efficiency while reducing design time and costs, as further proliferation and diversification of small hydropower generation is anticipated!
-
Challenging Decarbonization Technologies! Introduction to the Thermal Technology Research Institute [Opening on May 8]
We have various test furnaces available, including combustion equipment for hydrogen burners, allowing for thorough testing of energy-saving and low-carbon solutions in production sites together with our customers! Please feel free to contact us through this page. ~Equipment Overview~ ◇ Aluminum Melting Holding Furnace Testing of aluminum melting using hydrogen combustion is possible on a practical basis. The furnace structure suppresses oxidation. - Melting capacity: 150 kg/h - Holding capacity: 800 kg/ch - Melting burner (116 kW), holding heater (9 kW x 2) ◇ QCO Coating Equipment (Coating Booth and Drying Furnace) Testing is possible with four heat sources, accommodating various works. - Gas infrared burner - Gas far-infrared panel - Gas hot air & jet heating - Electric infrared heater ◇ High-Temperature Test Furnace Combustion testing of gas burners using hydrogen and 13A/LPG is possible. Measurement of exhaust gas components and confirmation of flame shape inside the furnace can be conducted. - Internal furnace temperature: Max. 800℃ ■ Fuel Supply 13A (45 MJ/㎥) LPG (100 MJ/㎥) Hydrogen (12.8 MJ/㎥) ■ Test Power Supply Equipment Max. 150 kVA, 200V (Please consult us for other voltages, etc.)
-
The Piston Cooling template has been added to SimericsMP+!
A Piston Cooling template for two-phase flow piston cooling simulation using oil injection has been added. It is now possible to model multiple pistons with a single piston cooling module. Additionally, conjugate heat transfer simulations can be performed without using Python scripts.
-
The 【SimericsMP+】Fuel Tank template has been added!
A Fuel Tank template has been added to simulate two-phase flow in the fuel tank of a vehicle.
-
The Vehicle template has been added to SimericsMP+!
A Vehicle template has been added for performing simulations of automotive exterior, under-hood airflow, and thermal damage analysis. Additionally, a new mesh type has been introduced, allowing selected solid components or internal fluid components to be retained within the template. Furthermore, "Drag development" has been added to the output of drag calculations.
-
The Marine template has been added to SimericsMP+!
A Marine template has been added for performing hull simulations. Additionally, a "Submerged hull" type for simulating underwater objects such as submarines and UAVs has been added. It is also possible to choose whether to maintain the water surface and whether to include propulsion.
Recommended products
Distributors
At Shoei Manufacturing Co., Ltd., we are taking on the challenge of "hydrogen combustion"! In addition, we offer various industrial furnaces such as "design and manufacturing of various original burners," "safety combustion system piping equipment," "food heating," "smoke and odor removal devices," "painting-related and heat treatment" equipment, as well as aluminum industrial furnaces like "melting furnaces and holding furnaces." Please also consult us about our self-developed energy-saving burners and "hybrid heating" that utilizes the unique characteristics of both "gas" and "electricity."