Non-drip manual multi-coupling "MCI Multi" [Fluid Connector]
![[General Information] Company information, news, event information, comprehensive catalog, etc.](https://image.mono.ipros.com/public/premium/image_category/871/1451405/IPROS75116048270806444895.png?w=140&h=140){kind=small}
![[Mold Exchange] Introduction of 'QMC' Products, Solutions](https://image.mono.ipros.com/public/premium/image_category/871/1451405/IPROS22360998441748675530.jpeg?w=140&h=140){kind=small}
![[Tool Changer] Introduction of 'MPS' Products, Solutions](https://image.mono.ipros.com/public/premium/image_category/871/1451405/IPROS23884298191330366689.jpeg?w=140&h=140){kind=small}
![[6-Axis Robot] Product Introduction for 'TX' and 'TX2'](https://image.mono.ipros.com/public/premium/image_category/871/1451405/IPROS98553070351268401955.jpeg?w=140&h=140){kind=small}
![[Scalar Robot] Product Introduction for 'TS' and 'TS2'](https://image.mono.ipros.com/public/premium/image_category/871/1451405/IPROS05444807668164251136.jpeg?w=140&h=140){kind=small}
Multiple couplings arranged on a single plate! Easy operation with just a turn of the lever for simultaneous attachment and detachment! No liquid dripping during attachment and detachment, keeping the work environment clean!
● Multi-Coupling Multiple couplings are arranged on a single plate. By consolidating the connections of multiple temperature control circuits spread throughout the mold onto one plate, it allows for easy attachment and detachment without connection errors, thereby improving work efficiency. ● Easy Operation The locking of the plate is a simple operation that only requires turning a lever. ● Non-Spill Structure Using couplings with a non-spill structure prevents air from entering the circuit during connection and prevents liquid drips during disconnection. This helps maintain a clean working environment. ● Abundant Options Safety features such as key codes (to prevent incorrect connections between plates), color plates, and safety lock mechanisms can be added.
basic information
● Model: Size (Diameter) x Number of Couplings ・MCI209.06: 9 mm x 6 pcs ・MCI209.12: 9 mm x 12 pcs ・MCI209.20: 9 mm x 20 pcs ● Maximum Operating Pressure ・16 bar ・10 bar (Seal Material: Fluoroelastomer / for use at 150℃ to 200℃) ● Locking Mechanism ・Lever-type ball lock system ● Presence of Valves ・Both valves ● Seal Materials ・Nitrile rubber, Fluoroelastomer, EPDM ● Connection Types ・External thread, Internal thread, Hose connection ● Various Options ・Safety lock system ・Proximity sensor ・Lever direction reversal ・Identification color plate ・Parking plate (base)
Price range
Delivery Time
Model number/Brand name
Stobri Fluid Connector MCI209 Multi
Applications/Examples of results
Integrated connection in all processes addressing issues such as temperature control circuits for molds in plastic molding, composite material processing, and casting processes, as well as contamination prevention like liquid dripping.
Detailed information
-
Case Study 3 of Special Products Achievements with a semiconductor equipment manufacturer. It is possible to manufacture a specification where a belt is used to lift the load instead of a wire, made entirely of aluminum (A7075), as shown in the photo.
-
Special Product Case 4 Medical-related achievements. This type uses fine strings to lift loads instead of wires. The photo shows a steel product treated with electroless nickel, which can be finished at a lower cost than all stainless steel or aluminum.
-
Special Product Case 5 Our lineup includes the SRM-005-11, a compact inline reducer made entirely of stainless steel. The input and output shafts are neither orthogonal nor offset; they are aligned in a straight line, yet it self-locks, making it very compact. It is particularly suitable for tilting devices and similar applications.
-
MCI209.06
-
Special Product Case 6 We have added guide rods to our lineup SLM-050-4.0 small rack jack, making it a twin shaft to address issues such as buckling. As shown in the photo, flanges can also be attached and manufactured at both ends. Please compare it to a cigarette. It is very compact.
-
MCI209.12
-
Special Product Case 7 The SLM-D type, which responds to the request to "raise and lower two rack rods simultaneously" in the SLM series. By connecting two rack jacks with a connecting pipe, it is possible to synchronize the two rack rods. Of course, it comes with a load-holding function and allows for a quite compact design.
-
MCI209.20
-
Installation Method 1: Installation with 4 legs
-
Installation Method 2: Installation via piping block
-
Installation Method 3: Directly attached to the mold / Designed with this premise from the mold design stage. This keeps the piping around the mold to a minimum, resulting in a compact and energy-efficient installation method.
-
Safety Lock System: A safety mechanism that locks the lever after connection. It prevents accidental disconnection (optional).
-
Proximity sensor: Monitoring the presence or absence of a connection (optional).
-
Handle: A handle (optional) to facilitate the operation of the active side.
Line up（3）
| Model number | overview |
|---|---|
| MCI209.06 | Coupling size: 9 mm Coupling quantity: 6 pcs |
| MCI209.12 | Coupling size: 9 mm Coupling quantity: 12 pcs |
| MCI209.20 | Coupling size: 9 mm Coupling quantity: 20 pcs |
catalog（3）
Download All Catalogs
Recommended products
Distributors
Stäubli has four business divisions: electrical connectors, fluid connectors, industrial robots, and textile machinery. Based on our exceptional expertise and years of accumulated know-how, we provide mechatronics solutions to various industrial sectors. Founded in 1892 as a small textile machinery repair shop near Zurich, Switzerland, Stäubli has grown into a global company operating in 28 countries and having sales partners/agents in 50 countries across four continents. In 1983, Stäubli Corporation was established in Osaka as a unit for business in Japan. We have a showroom in Nishi-Tenma (Osaka), so please feel free to visit us (by appointment only).