サニー・トレーディング Official site

This is a diaphragm-type polarographic sensor that can be used for a wide range of residual chlorine measurement applications, including pure water, seawater, wastewater, food, and groundwater.

【Specifications】 ■Measurement: Free chlorine or combined chlorine (monochloramine) ■Range: 0–2.000, 0–20.00, 0–200.0 mg/L ■Analog output: 4–20mA (2 points), load resistance below 500Ω ■Relay output: 3 points 6A @ AC250V (standard), (optional) 3 additional points ■Display: 4 digits / 12mm LCD (main display) 12 digits second line (sub display) ■Case: NEMA4X (IP-66) made of polycarbonate ■Operating temperature: 0–50℃ ■Operating pressure: 0–0.34MPa

Compact, lightweight, low-cost, and maintenance-free. It has a wide operating temperature range and does not require a straight tube section.

1. Minimum flow rate: 0.1 to 2.5 l/min; Maximum flow rate: 5 to 65 l/min 2. Maximum operating pressure: 2.5 MPa 3. Operating temperature: -20℃ to +100℃ 4. Output signal: NPN open collector pulse 5. Supports OEM (with display, wireless, with cable, battery-operated, etc.)

PDM+ is a gas detector that continuously measures concentrations to detect a lack of oxygen in the environment and the presence of toxic gases.

Model Detected Gas Range Resolution PDM+ O₂ Oxygen 0 - 30 %vol 0.1 %vol PDM+ CO Carbon Monoxide 0 - 500 ppm 1 ppm PDM+ CO Carbon Monoxide 0 - 2000 ppm 1 ppm (for high concentration) PDM+ H₂S Hydrogen Sulfide 0 - 100 ppm 0.1 ppm PDM+ H2 Hydrogen 0 - 1000 ppm 1 ppm PDM+ SO₂ Sulfur Dioxide 0 - 50 ppm 0.1 ppm PDM+ NH3 Ammonia 0 - 100 ppm 1 ppm PDM+ H₂O₂ Hydrogen Peroxide 0 - 99 ppm 0.1 ppm (non-explosion proof) PDM+ NO2 Nitrogen Dioxide 0 - 20 ppm 0.1 ppm

WatchGas NEO is a state-of-the-art portable VOC monitor capable of detecting from 1 ppb to a maximum of 20,000 ppm.

Model Measurement Range Resolution NEO PID BLUE 0 ppm - 5.000 ppm 0.01 ppm NEO PID BLUE High Range 0 ppm - 15.000 ppm 0.01 ppm NEO PID BLUE Extended Range 0 ppm - 20.000 ppm 0.01 ppm NEO Benzene Specific RED 0 ppm - 200 ppm Benzene 0.01 ppm (w/9.8 eV Lamp & Tube Holder)* 0 ppm - 10.000 ppm VOC 0.001 ppm (NEO Butadiene on request) NEO PPB Black 0 ppm - 15.000 ppm 0.001 ppm

It is possible to monitor toxic gases, oxygen (O2), combustible materials (LEL), carbon dioxide (CO2), and volatile organic compounds (VOC).

PID 0-200 ppm 0-2000 ppm 0-10000 ppm Oxygen LEL% Flammable Gas Hydrocarbon Gas (vol%) Dual Range LEL%/vol% Carbon Dioxide Carbon Monoxide Hydrogen Sulfide CO + H₂S SO₂ + H₂S Sulfur Dioxide Chlorine Chlorine Dioxide Nitric Oxide Nitrogen Dioxide Hydrogen Phosphine Ethylene Oxide Ammonia HF Hydrofluoric Acid Hydrochloric Acid Hydrogen Cyanide Methyl Mercaptan Acetaldehyde Arsine Phosgene Nitrous Oxide

WatchGas QGM detects oxygen, hydrogen sulfide, carbon monoxide, and combustible gases (LEL).

Model Measurement Range Resolution Oxygen 0-30 %vol 0.1 %vol Carbon Monoxide 0-500 ppm 1 ppm Hydrogen Sulfide 0-100 ppm 0.1 ppm Combustible Gas 0-100 %LEL 1 % LEL

WatchGas UNI is a compact and user-friendly single gas monitor.

Measuring gases Carbon monoxide (CO) Hydrogen sulfide (H2S) Oxygen (O2) Sulfur dioxide (SO2) Chlorine (Cl2) Nitric oxide (NO) Nitrogen dioxide (NO2) Hydrogen (H2) Phosphine (PH3) Ethylene oxide (ETO) Ammonia (NH3) Chlorine dioxide (ClO2) Ozone (O3) Hydrofluoric acid (HF) Hydrochloric acid (HCl) Hydrogen cyanide (HCN) Methyl mercaptan (CH3SH) Tetrahydrothiophene (THT) Acetaldehyde (C2H4O) Arsenic hydride (AsH3) Phosgene (COCl2)

Sanitary drum pump ideal for transferring, portioning, and filling in the beverage and food market! It comes with a hose and nozzle, so it's ready to use immediately!

For more details, please refer to the PDF document or feel free to contact us.

Capable of transferring high-viscosity fluids at up to 100,000 cps! A wide range of industrial drum pumps boasting excellent durability and strength!

【Other Published Content (Excerpt)】 ■ Drum Pump Motor ■ Accessories ■ Package ■ SP-700SR Series Pump ■ SP-700DD Series Pump *For more details, please refer to the PDF document or feel free to contact us.

Ideal for transporting water treatment chemicals, sterilization, disinfection, and cleaning solutions! Transfer from drums and containers! CPVC material drum pump!

【Features】 ○ Simple structure → With fewer parts, disassembly and cleaning are easy. ○ Batch control is also possible as an option → Required flow rates can be transferred with simple monitor operations. It can handle high-viscosity fluids of approximately 25,000 cps class. The discharge accuracy is about ±0.63%. For more details, please refer to the catalog below. ○ High-viscosity fluids up to 100,000 cps can be discharged accurately without compromising quality → The high-viscosity pumps SP-700SR and SP-700DD adopt a snake pump method. The snake-shaped rotor rotates with the motor, continuously creating a constant cavity, allowing for accurate discharge of high-viscosity fluids without compromising quality. For more details, please refer to the catalog or feel free to contact us.

Enhance the manufacturing line! Drum pump system with a lightweight and portable lifter.

【Specifications】 ■ Wash Down Model - One-piece welded stainless steel frame - Stainless steel mounting arm - Battery pack, control module, and lift motor are dustproof/water-resistant (IP65) - Hardened aluminum mast - Stainless steel lift screw ■ Dry Environment Model - Stainless steel legs - Anodized frame - Stainless steel pump mounting arm - Hardened aluminum mast *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

High-viscosity foods are also OK! A sanitary pump that is hygienic and easy to maintain.

【Introduction to Other Sanitary Pumps】 ○Sanitary Drum Pump for Cosmetics →Suitable for high viscosity, hygienic, and easy to maintain ○Drum Pump for Chemical Industry →Achieves excellent durability and strength, outstanding safety ○Air-Driven Double Diaphragm Sanitary Pump →Maintains a clean and safe environment with FUSED diaphragm ●For more details, please contact us or download the catalog.

Robust and efficient! A hygienic clean drum pump for sanitary fluid transfer.

【Specifications】 ■ Drive Motor Numbers 　・SP-8600-39　・SP-8600-47 　・SP-8700-39　・SP-8700-47 ■ Immersion Length 　・1000mm (Drum) 　・1200mm (Tote Tank and Drum) ■ Wetted Parts Material 　・SUS316, PTFE, and Beech ■ Motor Drive 　・SP-280P　・SP-ENC　・SP-A1　 　・SP-A2　　・AP-400 Series ■ Discharge Size 　・1.5″ (38mm) Tri-Clamp Connection ■ Maximum Viscosity: 1000cps (mPAS) ■ Maximum Discharge Pressure: 0.29MPa ■ Maximum Discharge Flow Rate: 132LPM ■ Pump Packaging Weight 　・PN: SP-8600-39, SP-8700-39 (5.5kg) 　・PN: SP-8600-47, SP-8700-47 (6.4kg) ■ Maximum Temperature: 80℃ *For more details, please refer to the catalog or feel free to contact us.

It has excellent reliability and chemical resistance due to its robust PVD coating.

【Features】 ○ Two types of motors: electric drive and air drive → You can choose the appropriate one from a variety of motors. ○ Simple structure → With fewer parts, disassembly and cleaning are easy. ○ Capable of precise dispensing of high-viscosity fluids up to 100,000 cps without compromising quality → The high-viscosity pumps SP-700SR and SP-700DD utilize a snake pump mechanism. The snake-shaped rotor rotates with the motor, constantly creating a consistent cavity, allowing for precise dispensing of high-viscosity fluids without compromising quality. For more details, please refer to the catalog or feel free to contact us.

Ideal for the transfer of chemical fluids due to its sturdy polypropylene.

【Features】 ○ Two types of motors: electric drive and air drive → You can choose the appropriate one from a variety of motors. ○ Simple structure → With fewer parts, disassembly and cleaning are easy. ○ Batch control is also possible as an option → Required flow rates can be transferred with simple monitor operations. It can handle high-viscosity fluids of approximately 25,000 cps class. The discharge accuracy is about ±0.63%. For more details, please refer to the catalog below. For more information, please refer to the catalog or feel free to contact us.

Easy installation on drum rails! Drum pumps that can be made with materials suited for the fluid.

【Pipe Material】 ○Polypropylene ○PTFE ○Aluminum ○AISI316 ●For more details, please contact us or download the catalog.

This is a diaphragm pump ideal for the transfer of food, drinking water, and cosmetics in industrial applications.

【Features】 ○ Easy to remove → Can be removed without tools using a clamp system. ○ Smooth surface → The diaphragm is made using a sandwich method, resulting in a completely smooth surface. No issues with bacterial growth. The diaphragm is made of high-purity TFM (PTFE) suitable for food grade. ○ Highest level of finishing → The wetted parts and external surfaces are finished with electropolishing for hygienic grade. ○ Clean air valve → The sealing system is oil-free. ○ Diverse connections → The pump connections adopt the DIN 11851 standard as standard. For pumps used in hygienic specifications, connections of tri-clamp, SMS, RJT, JIS, ANSI, and other standards are used. ○ Pumps designed for CIP and SIP systems → Enables automatic cleaning and disinfection for CIP (Clean In Place) and SIP (Sterilize In Place) without disassembling and reassembling the pump. *For more details, please feel free to contact us.

The chemical back pressure valve prevents siphoning and allows for pressure adjustment! It uses a highly chemical-resistant PTFE diaphragm! A back pressure valve for high pressure!

【Specifications】 Size: 1/4" to 1" (DN8 to DN25) Connection: Thread, Socket, Flange Maximum Temperature: 200℃ Maximum Pressure: 5.5MPa Maximum Flow Rate: 4.06m³/h (with pulsation) 211L/min (without pulsation) Material: SUS316, Hastelloy C, Alloy 20, Titanium *We also handle various pumps, back pressure valves, relief valves, pulsation dampeners, calibration cylinders, filters, hoses, and measuring instruments. For more details, please download the catalog or contact us.

The chemical relief valve (safety valve) prevents excessive pressure! It uses a highly chemical-resistant PTFE diaphragm! A relief valve for high pressure!

【Specifications】 Size: 1/4" to 1" (DN8 to DN25) Connection: Thread, Socket, Flange Maximum Temperature: 200℃ Maximum Pressure: 5.5MPa Maximum Flow Rate: 4.06m³/h (with pulsation) 211L/min (without pulsation) Material: SUS316, Hastelloy C, Alloy 20, Titanium *We also handle various pumps, back pressure valves, relief valves, pulsation dampeners, calibration cylinders, filters, hoses, and measuring instruments. For more details, please download the catalog or contact us.

PTFE flange connection back pressure valve/relief valve! Machined from solid PTFE! Ideal for applications requiring chemical resistance, such as sulfuric acid!

【Specifications】 Size: 1/2", 3/4", 1/2" Connection: Flange Maximum Temperature: 148℃ Maximum Pressure: 1.0MPa Maximum Flow Rate: 1749L/h (with pulsation) 92L/min (without pulsation) Material: PTFE *We also handle various pumps, back pressure valves, relief valves, pulsation dampeners, calibration cylinders, filters, and hoses. For more details, please download the catalog or contact us.