This is an introduction page for a case study on the introduction of the PUR curtain spray application device. 【Installed System】 - 3 Curtain Spray Guns (Coating Width: 700mm to Maximum Width 2,100mm) - W-Pail Melter - Relay Manifold 【Features】 ■ Utilizes the cohesion and viscosity of hot melt (adhesive) to discharge fine fibers, enabling uniform thin film application ■ Achieves a soft finish with breathability ■ Cost benefits available *Reduction in the amount of hot melt (adhesive) used *For more details, please download the PDF or feel free to contact us.

The "Tank Filter (APF)" is our standard type of tank filter. 【Features】 ■ Installed in VH series, VA series tanks, etc. ■ Our standard type of tank filter ■ Capable of filtering carbides ■ Prevents carbide contamination in hoses *For more details, please download the PDF or feel free to contact us.

This is an introduction page for a curtain spray coating device case study. 【Introduced System】 Curtain Spray Coating Device 【Features】 ■ Compatible with adhesives from high viscosity to low viscosity ■ Utilizes the cohesion and viscosity of hot melt (adhesive) to discharge fine fibers, enabling uniform thin film coating ■ Breathable and achieves a soft finish *For more details, please download the PDF or feel free to contact us.

This is an introduction page for the case study of the Coater Head (Slot Coat) Pale Melter. 【Installed System】 Coater Head (Slot Coat) Pale Melter 【Features】 ■ Contact-type coating coater head ■ Coating patterns can be set arbitrarily based on the shim pattern. ■ Capable of high-speed intermittent adhesion, compatible with adhesives from high to low viscosity ■ Beautiful coating with thin film adhesion ■ There are also products to prevent rolling during coating and to address clumping of hot melt adhesives (using hot air). *For more details, please download the PDF or feel free to contact us.

The "bead nozzle" is a small nozzle suitable for applying thin lines (beads) and dot applications. 【Features】 - Optimal for line (bead) and dot patterns, capable of multi-line intermittent application - Achieves stable application, providing a uniform and beautiful coating - Reduces product waste, improves productivity, and offers cost benefits *For more details, please download the PDF or feel free to contact us.

The "inline filter" is a simple filter that can be installed inside a hose nipple. 【Features】 ■ Compact design ■ Capable of filtering carbides ■ Prevents carbide contamination in the gun unit ■ Can be installed inside a hose nipple ■ Ideal for use with small devices and testing equipment *For more details, please download the PDF or feel free to contact us.

The "Tornado" is a system that allows for the transportation and heating of solid hot melt adhesive at room temperature in a short time, enabling a continuous and stable supply. 【Features】 ■ Hot melt adhesives and resins can be melted in about 1 minute. ■ High-viscosity hot melts can also be melted instantly (usable viscosity range up to 200,000 mPa·s). ■ It has a low thermal history, preventing the gelation and carbonization of hot melts. ■ It demonstrates effectiveness with hot melts that have a fast thermal degradation rate, such as polyamides! *For more details, please feel free to contact us.

The "TSM-G3/G4" is a non-contact small spiral spray nozzle. By forming a spiral pattern, it allows for a thinner application. The secondary air protects the nozzle, preventing clogging from hot melt or paper dust, and minimizes air interference between nozzles, enabling uniform application in a consistent pattern. 【Features】 ■ Capable of creating a fine and dense spiral pattern without gaps ■ Compatible with high-viscosity hot melt adhesives ■ Pattern stability is maintained with secondary air *For more details, please feel free to contact us.

This is an introduction page for case studies of our DP300 and DP1000. 【Installed Systems】 DP300, DP1000 (bead specification) 【Features】 ■ Supports bead and dot application ■ Various applications possible with head replacement ■ Models for reactive hot melt adhesives are also available (DP300P) ■ Compatible with high viscosity hot melt adhesives *For more details, please download the PDF or feel free to contact us.

The "GB2000" is a gun module suitable for continuous application of spiral patterns. Coating with different patterns of melt linearity can be achieved simply by changing the nozzle. 【Features】 ■ Continuous/Intermittent coating ■ Capable of creating a fine, dense spiral pattern without gaps *For more details, please feel free to contact us.

The 'Filter (for Filter Core)' is a filter that can be mounted on a filter core. The filter and the fixing block are integrated, making it easy to attach and detach, which is why it is adopted in many systems. [Features] ■ Capable of filtering carbides ■ Prevents carbide contamination in the gun unit *For more details, please feel free to contact us.

Introducing Toyochem Co., Ltd.'s new product! This is the introduction page for PUR adhesive. Despite being PUR, it has adhesive properties, demonstrating adhesion in various environments and allowing for application with various coating patterns. - "PUR Adhesive Sheet" with adhesive properties despite being PUR - "Heat-resistant PUR-HM Adhesive" with high heat and cold resistance - "Functional Optical PUR Adhesive" usable in a wide temperature range *For more details, please refer to the related links or feel free to contact us.

This is a case study introduction for printing manufacturers. We have achieved labor-saving in conventional labeling tasks. 【Introduced System】 DP1000 (Coater Head Specification) 【Features】 ■ Compatible with adhesives ranging from high viscosity to low viscosity ■ Commonly used for gluing and filling small boxes. ■ A system that can be mounted on a robot can also be produced. *For more details, please contact us.

This is an introduction page for the case study of our DP300P coating device. 【Installed System】 DP300P CC Coater 【Features】 ■ Compatible with high-viscosity hot melt adhesives ■ Contact-type coating head ■ Coating patterns can be set arbitrarily based on shim patterns *For more details, please download the PDF or feel free to contact us.

This is an introduction page for case studies of our curtain spray coating equipment. 【Installed System】 Complete curtain spray coating equipment *Maximum coating width of curtain nozzle is 1230mm 【Features】 ■Compatible with adhesives from high viscosity to low viscosity ■Utilizes the cohesion and viscosity of hot melt (adhesive) to discharge fine fibers, enabling uniform thin film coating *For more details, please download the PDF or feel free to contact us.

Affordable and compatible with other manufacturers' systems! Improved module of S100 The 'S100M' is a compact standard type gun module. It features an open-close valve that controls the discharge and stop of hot melt sent from the hose. It is suitable for continuous application of hot melt and is used in various industrial equipment. Due to its compatibility with other products, it can be easily replaced. Improvements have been made to the S100 module to address the issue of hot melt dripping when the gun is stopped, which is caused by the mounting nozzle. 【Features】 ■ Compatible with other manufacturers ■ Reasonably priced standard type for continuous application ■ Prevents hot melt leakage ■ Excellent maintainability ■ Improved production efficiency ■ Reduced maintenance workload *For more details, please download the PDF or feel free to contact us.

This is an introduction page for the case study of our DP1000 implementation. 【System Introduced】 DP1000 (Coater Head Specification) - Equipment Specifications DP1000S (Standard Specification) Tank Capacity: 1 liter Air Pressure: Tank Type Voltage: 1φ 200VAC *For more details, please download the PDF or feel free to contact us.

The foam applicator contributes to new productivity! The newly designed circulation system stabilizes the foam expansion ratio! 【Features】 ■ Nitrogen gas is mixed with hot melt (adhesive) to transform it into foam! ■ The bubbles are independent cells, resulting in low water absorption and improved impact resistance. ■ Easy adjustment of the foam expansion ratio. ■ Santool's unique design allows for switching between foamed and non-foamed applications. ■ The new circulation system stabilizes the foam expansion ratio. ■ In addition to beads, surface coating is now possible, diversifying applications. ■ By foaming the hot melt, it can be applied with less hot melt. ■ Reduction in the cost of the hot melt (adhesive) used. ■ Compatible with adhesives from high viscosity to low viscosity. ■ By entering the desired foam expansion ratio, anyone can create foam (no complicated operations required). *For more details, please download the PDF or feel free to contact us.

Achieve stable application! Hot melt supply unit 【Features】 ■ Stable supply of melt possible ■ Linear assurance of required amount ■ Reduced downtime ■ Reduced product waste ■ Contributes to environmental conservation ■ Cost benefits ■ Improved production efficiency *For more details, please download the PDF or feel free to contact us.

This document introduces a case study of the "Curtain Spray Coating Device" that we handle. 【Features】 ■ Soft finish ■ Cost benefits *Reduction in the amount of hot melt (adhesive) used ■ Compatible with adhesives from high viscosity to low viscosity ■ Breathable ■ Even coating weight ■ Environmentally friendly / Recycling measures ■ Uniform and beautiful coating We would like to present one example among various companies that have adopted these features.

This document introduces examples of the "Spiral Coating Device" that we handle. 【Features】 ■ Soft finish with a pleasant texture ■ Reduces waste/loss of hot melt adhesive ■ Uniform coating weight with breathability/water permeability ■ Solvent-free/low-solvent for environmental/recycling measures ■ Unique nozzle with secondary air ■ Uniformly and beautifully coats ■ Compatible with adhesives from high viscosity to low viscosity ■ Capable of high-speed intermittent adhesion 【Features of the Nozzle with Secondary Air】 ■ Stable patterns with guide air ■ Maintenance is greatly reduced as there is no adhesion of foreign substances due to protection with clean air ■ Spiral coating of high-viscosity hot melt, which was difficult with conventional methods, is now possible *For more details, please download the PDF or feel free to contact us.

This document introduces examples of the "dispenser coating device" that we handle. 【Features】 ■ Various coatings are possible with head replacement ■ Simple mechanism and maintenance-free ■ Enhanced convenience with a wide range of options ■ Also available for reactive hot melt (DP300P) ■ Compatible with adhesives from high viscosity to low viscosity ■ Commonly used for gluing and filling small boxes ■ Systems that can be mounted on robots are also available. *For more details, please download the PDF or feel free to contact us.

This document introduces examples of the "Foam Melt Device" that we handle. 【Features】 ■ Incorporates nitrogen gas into hot melt, transforming it into a foam! ■ The bubbles are independent cells, resulting in low water absorption and improved impact resistance. ■ Easy adjustment of the foam expansion ratio. ■ Unique design by Suntool allows switching between foamed and non-foamed states. ■ Newly designed circulation system stabilizes the foam expansion ratio. ■ Enables surface coating in addition to bead application, diversifying applications. ■ Reduces the cost of the hot melt used by foaming it. ■ Compatible with adhesives from high viscosity to low viscosity. ■ By entering the desired foam expansion ratio, anyone can create foam (no complicated operations required). *For more details, please download the PDF or feel free to contact us.

Utilizing the adhesive power (viscosity) of hot melt to extrude fine fibers and apply them uniformly in a non-woven fabric style! It is possible to spray apply in a single unit even over a wide area! 【Features】 ■ Uniform application of a small amount of hot melt is possible ■ Excellent application with a soft texture ■ Sharp edges at both ends of the application width ■ Minimal scattering during application ■ Hot melt can be applied in a fibrous form *For more details, please contact us.

Achieve stable and precise coating with ultra-fine pitch! Line drawing pattern forming nozzle 【Features】 ■ Optimal for line drawing (bead) patterns ■ Capable of precise coating with ultra-fine pitch ■ Achieves stable coating ■ Can accommodate arbitrary patterns ■ Reduces product waste ■ Increases productivity ■ Cost-effective *For more details, please contact us.

【Aluminum Cartridge Can 300cc】 Lightweight and compatible with all hot melt adhesives! Cartridge can for handguns 【Features】 ■ Comes with plunger and end cap ■ Lightweight ■ Temperature range: 50℃ to 130℃ ■ Cartridge type *For more details, please contact us.

25mm Wide High-Speed Intermittent Small Sack Back Gun Module The 'SB-2530-V' is a small gun module with a sack back mechanism that excels in the cutting performance of hot melt and features a high response type. It is suitable for high-speed intermittent application of hot melt thread rubber (gathering) using a V-comb head and is used in various industrial equipment. 【Features】 ■ High durability ■ Ideal for high production intermittent application ■ Reduced downtime ■ Lower running costs ■ Achieves high-speed and accurate intermittent patterns *For more details, please download the PDF or feel free to contact us.

25mm Wide High-Speed Intermittent Small Sack Back Gun Module The 'SB-2530-H' is a small gun module with a sack back mechanism that excels in the cutting performance of hot melt adhesives, designed for high-speed response. It is suitable for high-speed intermittent spraying of hot melt and is used in various industrial applications. 【Features】 ■ High durability ■ Ideal for high-speed intermittent spraying patterns ■ Reduced downtime ■ Achieves high-speed and accurate intermittent patterns ■ Reduced running costs *For more details, please download the PDF or feel free to contact us.

25mm Wide High-Speed Intermittent Small Sack Back Gun Module The 'SB-2530-SP' is a high-speed response type small gun module that excels in the cutting performance of hot melt adhesives due to its sack back mechanism. It is suitable for spiral high-speed intermittent application of hot melt and is used in various industrial equipment. 【Features】 ■ High durability ■ Ideal for high production intermittent application ■ Changeable application position (nozzle position) by changing the nozzle seat ■ Reduced downtime ■ Reduced running costs ■ Optimal for spiral spray pattern application ■ Capable of custom pattern support ■ Achieves high-speed and accurate intermittent patterns *For more details, please download the PDF or feel free to contact us.

The "ZIP Nozzle" is a compact, non-contact spray nozzle. Since the application pattern does not overlap, it reduces bleeding onto the substrate, resulting in a better finish of the base material. It has minimal hot melt dispersion and excellent conservation properties, making it suitable for various industrial equipment. 【Features】 ■ Reduction in air consumption compared to spiral spray application ■ Easy maintenance due to the ability to replace individual nozzles (25mm width) ■ Achieves a soft texture ■ Excellent conservation properties ■ Cost benefits ■ Reduction in running costs ■ Reduction in maintenance labor *For more details, please download the PDF or feel free to contact us.