Achieve pellet-based modeling in a tabletop size!

システムクリエイト

Pellets, which are often used for large-scale modeling, can also be used for desktop-sized modeling. Materials that cannot be converted into filament and research and development pellets can also be modeled. Furthermore, it is possible to change the head, allowing for two types of modeling with one machine by installing a filament head. [Features] - The print head uses a screw type and controls temperature at two points, allowing for uniform melting of materials and reliable feeding to the nozzle. - Equipped with a wear-resistant nozzle, it supports open materials, making it usable with filler materials as well. - The nozzle temperature can be raised to 300°C, and the table temperature can reach 100°C. - Adopting the IDEX method, two print heads operate independently. - A pellet feeder capable of holding up to 10 liters is available, enabling efficient long-duration modeling. - The modeling area is available in sizes of 300×300×250mm and 500×500×500mm. *For more details, please request a catalog or refer to the related information below.

Utilize pellet molding in a tabletop size!

Date and time
Capital
Entry fee

Related product information

Pellet + FDM Hybrid 3D Printer 'Tumaker'
"Tumaker" is a desktop-sized FGF method 3D printer that uses pellets as its material. *Demonstration available.

[Product Specifications] Common to all sizes ■ Printing method: FAF method / FDM method ■ Minimum layer height: 0.01mm ■ Maximum print speed: 100mm/s (pellet), 150mm/s <Mini Pro Series> ■ Maximum build size: 140×115×150mm to 140×135×150mm ■ Main unit size: 350×350×380mm <NX300 Modular> ■ Build size: 1300×300×250mm ■ Main unit size: 840×635×805mm <BIGFoot 500 Modular> ■ Build size: 500×500×500mm ■ Main unit size: 550×440×410mm
Malsugo: Automatically replenish materials in the necessary amounts! Tumaker
Automatically replenish pellet materials!? Tumaker NX 300/BigFoot 500 Modular "Pellet Feeder"

■ This is amazing! Tumaker NX 300 modular/BigFoot 500 Modular "Pellet Feeder" 　→ Automatically replenishes the required amount of material!! ■ POINT 　→ Detects remaining amount with a sensor mounted on the head & supplies automatically!
Marsgo can 3D print with pellets despite being desktop-sized.
3D Printing with Pellets on Your Desktop! Explaining the Amazing Features of the "Tumaker NX・BIGFoot Series" Print Head | System Create

■ This is amazing! Tumaker NX・BIGFoot series → You can 3D print with pellets despite its desktop size!! ■ POINT → A dedicated print head that melts and feeds pellets.