[Case Study] Improving Coating Quality of Die Coaters and Sustaining Initial Performance for a Long Time

Solving challenges such as 'I want to use a pump that can maintain high delivery accuracy for a long time!' Here is a case study from an electronic materials manufacturer.

最終更新日 Nov 05, 2025

[Case Study] Preventing Bead Jamming to Achieve Stable Operation of the Disperser

Solving issues such as 'the cleaning ability of the shaft seal is poor and causing problems'! Introducing a case study from a battery manufacturer.

最終更新日 Nov 05, 2025

[Case Study] Total Control of Temperature and Flow Rate for Liquids Prone to Solidification

We solve requests such as 'We want to insulate tanks and pipes because the liquid solidifies at low temperatures!' Here is a case study from a cosmetics manufacturer.

最終更新日 Nov 05, 2025

[Case Study] Suppressing piping vibration without using air chambers

"We want to transfer the concentrated nitric acid used as CIP cleaning solution to the dilution tank." Solving your request! Introducing a case study from a food manufacturer.

最終更新日 Nov 05, 2025

[Case Study] Measuring Accurate Actual Injection Volume with Flow Meters to Reduce Waste of Chemical Solutions

Solving issues such as the need to go from the equipment management building to the water purification tank for concentration confirmation! Introducing examples from local governments (water purification plants).

最終更新日 Nov 05, 2025

[Case Study] Continuous Transfer of Color Toner Pigments Without Wear

Solving the request to supply raw materials to the disperser on the color toner manufacturing line! Introducing a case study from an OA equipment manufacturer.

最終更新日 Nov 05, 2025

[Case Study] Elimination of Foreign Matter Contamination During Concentrated Juice Transfer

Eliminating foreign matter contamination with existing rotary pumps! A case study from a food manufacturer.

最終更新日 Nov 05, 2025

[Case Study] Transporting UV-curable resin without curing

Introducing a case study of an electronic component manufacturer that was looking for a pump to supply liquid to a die coater!

最終更新日 Nov 05, 2025

[Case Study] Accurate Management of Residual Chlorine Concentration in Rinsing Water for Bottles

Solving issues such as the inability to accurately measure chlorine concentration! Introducing a case study from a beverage manufacturer.

最終更新日 Nov 05, 2025

[Case Study] Flow-Proportional Injection in Ballast Water Treatment Systems

Solving the request to inject chemicals into seawater with a ballast water treatment system installed on ships! Introducing case studies from water treatment equipment manufacturers.

最終更新日 Nov 05, 2025

[Case Study] Stable Injection of Chelating Agents to Prevent Heavy Metal Leaching

Solving issues such as "looseness and leakage" when using plunger pumps! Introducing case studies from local governments (wastewater treatment plants).

最終更新日 Nov 05, 2025

[Case Study] Inline neutralization treatment of 500 tons of rainwater per hour.

We have resolved the request to reuse rainwater on the premises! Here is a case study from a steel manufacturer.

最終更新日 Nov 05, 2025

[Case Study] Circulation test maintaining constant chlorine concentration, temperature, and pressure for several months.

We have resolved the request to create equipment for conducting quality conformity tests for construction resin pipes! Here is a case study from a construction pipe manufacturer.

最終更新日 Nov 05, 2025

[Case Study] High-pressure injection of 90°C high-temperature liquid into an extrusion molding machine.

We have resolved the request to use a pump to inject additives into the resin extrusion molding machine! Here is a case study from a resin product manufacturer.

最終更新日 Nov 05, 2025

[Case Study] Circulation of 75% sulfuric acid at high temperature for an extended period at a constant flow rate.

We have resolved the request to circulate sulfuric acid in the experimental line of the research institute! Here is a case study from a chemical plant manufacturer.

最終更新日 Nov 05, 2025

[Case Study] Transferring solvent-based slurry at a flow rate of 50 liters per minute and measuring the flow rate.

We have resolved the request to transfer organic solvents containing micro-particles of a few microns! Here is a case study from a petrochemical manufacturer.

最終更新日 Nov 05, 2025

[Case Study] Solving Wear from High-Concentration Slurry and Improving Coating Precision

To solve the challenge of needing to send liquid at a constant flow rate to achieve a uniform coating surface! Here is a case study from an electronic components manufacturer.

最終更新日 Nov 05, 2025

[Case Study] Diverting the raw material liquid in six directions and injecting it into the mixing tank.

We have resolved the request to inject the same amount of liquid from six locations at the top of the mixing tank in the manufacturing process of dental materials! Here is a case study from a dental materials manufacturer.

最終更新日 Nov 05, 2025

[Case Study] Safe Long-Distance Transport of Concentrated Sulfuric Acid (98%)

Solving issues such as 'damage caused by corrosion from sulfuric acid without realizing it'! Introducing a case study from a steel manufacturer.

最終更新日 Nov 05, 2025

[Case Study] Transporting abrasive slurry without liquid leakage

Solving issues such as 'the sliding part wears out and causes liquid leakage' and 'pulsation does not completely disappear, resulting in uneven coating'!

最終更新日 Nov 05, 2025

[Case Study] Stability of Concentration During Sulfuric Acid Dilution and Reduction of Work Costs

Solving issues such as 'unable to achieve the targeted concentration'! Examples of stable concentration and reduced operational costs.

最終更新日 Nov 05, 2025

[Case Study] Quantitative Transfer of Hydrochloric Acid at 98°C Containing Metal Powder

Quantitative transfer of hydrochloric acid at 98℃! Solving issues such as "measurement values were unstable due to the pulsation of the pump"!

最終更新日 Nov 05, 2025

[Case Study] Transport of a liquid that hardens upon exposure to air

Solving the issue of "hardeners sticking due to exposure to air, causing pump failures" at the foundry manufacturer!

最終更新日 Nov 05, 2025

[Case Study] Automating the 4-liquid mixing process and improving quality.

Solving issues such as 'variability in concentration'! A case where automation improved the process and enhanced quality.

最終更新日 Nov 05, 2025

[Case Study] Achieving Uniform Coating Thickness without Disturbing the Liquid Level in a Gravure Coater

A case study that solved issues such as "the pumps are wearing out quickly and are prone to breaking" at a material manufacturer.

最終更新日 Nov 05, 2025

[Case Study] Safely Transporting Caustic Soda through Long-Distance and High-Elevation Piping

Safe transportation of caustic soda! A case that solved the challenge of not being able to use pumps due to the risk of liquid leakage!

最終更新日 Nov 05, 2025

[Case Study] Reducing Liquid Waste with Spray Application of Release Agent

Case studies that solved challenges such as "wanting to eliminate waste and reduce costs" for rubber product manufacturers.

最終更新日 Nov 05, 2025

[Case Study] Automation of Flow Management from Manual Weighing to Flow Measurement with Flow Meters

Automate flow management with flow meters! Solve issues such as "unable to use flow meters" and "unstable flow"!

最終更新日 Nov 05, 2025

[Case Study] Safely Diluting Sodium Hydroxide (Caustic Soda)

Solving issues such as the risk of liquid splashing! A case of safely diluting sodium hydroxide.

最終更新日 Nov 05, 2025

[Case Study] Preventing Metal Contamination to Improve Quality with Uniform Film Thickness

This is an example of solving issues such as "wear powder from the pump mixing into the liquid, causing metal contamination"!

最終更新日 Nov 05, 2025