Equipment: Small polyurethane injection machine

For hard and soft urethane molding! It can be used for automotive prototypes and mass production, as well as building components.

last updated Jul 30, 2021

Development of small micro pumps (micro pumps) to mass production process.

Delivering to customers with assured quality! Building a process towards mass production based on test data!

last updated Jul 30, 2021

Injection molding cylinder screw suitable for engineering plastic molding.

Ideal for engineering plastic molding! Reduces losses such as gas burn, flash, and wear resistance.

last updated Jul 30, 2021

Injection molding super engineering plastic PPSGF60% heat resistance

For automobiles (mass production) and medical devices! Compatible with PPSGF 60% with a precision of 0.1mm to 1/100mm!

last updated Jul 30, 2021

Insulated tank for beverage dispensers, rigid polyurethane foam.

Less likely to experience performance degradation due to the risk of peeling and prevention of condensation! Approximately 30% higher performance insulation material compared to conventional expanded PS.

last updated Nov 19, 2021

Precision molding (injection) dimensional tolerance 0.005mm (up to 0.1 micron unit)

Injection molding machines range from 50t to 230t! Facilities for constant temperature and humidity environments aimed at precision molding, along with clean spaces to prevent foreign material adhesion.

last updated Nov 19, 2021

Insulation material for cold storage tanks of beverage servers for fast food, made of rigid polyurethane molding.

There are no gaps between the resin tank and the urethane, making it less likely to peel off and preventing condensation, which helps maintain performance!

last updated Dec 20, 2021

Insulated tank for beverage server, rigid polyurethane foam.

A cooling tank made from materials with an ozone depletion potential of zero and an extremely low global warming potential!

last updated Dec 20, 2021

Cold storage tank for beverage dispensers for family restaurants.

Insulation material, rigid polyurethane molding! We can accommodate with blow-molded products + rigid foam polyurethane assemblies.

last updated Dec 20, 2021

Insulation material for hot water storage tanks made of rigid polyurethane for Enecut.

Insulation of the outer circumference and top surface of the hot water tank! A polyurethane that conforms to the shape of the tank using non-combustible paper for the surface material.

last updated Dec 20, 2021

Non-combustible paper molded with rigid urethane for irregularly shaped foam products, insulation material for water heater storage tanks.

Non-combustible paper used for irregular foam products! Achieving space-saving compared to conventional glass wool.

last updated Dec 20, 2021

Rigid polyurethane molding beer server cooling tank insulation material

Uses high-performance urethane with excellent thermal insulation properties! It has features that are less likely to degrade in performance.

last updated Dec 20, 2021

Rigid urethane molding insulation material for gas water heater storage tanks.

Insulation of the outer circumference and top surface of the storage tank! Non-combustible paper is used for the surface material, providing flame resistance.

last updated Dec 20, 2021

Hard polyurethane molded insulation tank for cup vending machines

Using the self-adhesive power of urethane! There are no gaps between the resin tank and the urethane, preventing peeling and condensation.

last updated Dec 20, 2021

Rigid urethane molded insulation tank for drink dispensers

Compared to general expanded PS (0.034W/mk), it has about 30% higher performance! It is compatible with blow-molded products and rigid foam urethane assemblies.

last updated Dec 20, 2021

Insulated cold tank for office coffee servers made of rigid polyurethane foam.

Response with blow-molded products + rigid foam urethane assemblies! Using materials with extremely low global warming potential.

last updated Dec 20, 2021

Hard polyurethane molding commercial coffee server cooling tank insulation material

The thermal conductivity is an initial value of 0.021 W/mk! Using materials with a zero ozone depletion potential and an extremely low global warming potential!

last updated Dec 20, 2021

Insulated material for air cargo refrigerated carts, Alpolic sandwich panel.

Injecting urethane between the Alpolic panels! It can be integrally molded with the panels for high performance.

last updated Dec 20, 2021

Rigid urethane molding, gas venting optimization, composite integral molding with different materials.

Gas release optimization! We have refined composite molding with different materials cultivated over more than 40 years of history.

last updated Dec 20, 2021

Hard polyurethane molding vending machine HOT/COLD partition board

While maintaining insulation, we also secure the capacity inside the vending machine! Our company turns ideas into "form" with technology.

last updated Dec 20, 2021

Rigid urethane molded commercial refrigerator condenser container

Insulation of the condenser for commercial refrigerators! Approximately 30% more efficient compared to standard foam PS (0.034 W/mk).

last updated Dec 20, 2021

Medical reagent refrigerator cabinet and door

Insulation for laboratory refrigerators! Using high-performance polyurethane with excellent insulation properties, it is approximately 30% more efficient compared to standard expanded PS!

last updated Dec 20, 2021

Wine cellar door hard urethane molding

Block outside temperatures and maintain a constant temperature inside! Our company turns ideas into "form" with technology.

last updated Dec 20, 2021

Non-Freon insulation foam thermal conductivity initial value 0.021 W/mk

We use materials with an ozone depletion potential of zero and an extremely low global warming potential!

last updated Dec 20, 2021

Equipment Measuring Instrument/Test Equipment Oscilloscope

Transform ideas into 'form' with technology! Observe changes in electrical signals of a small DC pump using an oscilloscope.

last updated Dec 27, 2021

Water purifier, liquid delivery, small DC diaphragm pump, small DC centrifugal pump.

Compact DC pump (micro pump) suitable for commercial coffee servers and water servers.

last updated Jan 17, 2022

Soundproof room equipment

We conduct tests in our soundproof room! Please feel free to contact us when you need our services.

last updated Jan 17, 2022

Basic Knowledge of Injection Molding

The injection molding process can be broadly divided into six steps! It is suitable for mass production of complex-shaped products.

last updated Jan 18, 2022

Differences between general-purpose plastics, engineering plastics, and super engineering plastics.

Basic knowledge of resins! Thermoplastic resins are classified based on performance such as heat resistance, applications, and price.

last updated Jan 18, 2022

Washable partition (elastomer frame) rigid urethane molding

Introducing a washable partition that can be rinsed with water and thoroughly cleaned!

last updated Jan 18, 2022