テクネ計測 Official site

It is possible to measure trace amounts of moisture in various gases and trace concentrations of CO, CO2, NH3, etc.!

The type changes depending on the measurement target. For the measurement concentration range and detection limit (3σ), please refer to the catalog. 【Type】　　　　　　【Measurement Target】 Spark H2O in CO2　　　　Moisture Spark CH4　　　　　　　Methane Spark +CO　　　　　　Carbon Monoxide Spark C2H2　　　　　　 Acetylene Spark CO2　　　　　　 Carbon Dioxide Tiger Optics products have been used by customers around the world for over 10 years as the original cavity ring-down spectroscopy (CRDS) analysis equipment. CRDS has strengths in its ease of operation and high performance, making Tiger Optics devices perform perfectly across a wide range of applications. By using SPARK, you can experience how high-performance CRDS is and achieve efficient measurements.

The world's first self-contained portable dew point calibrator!

Measurement range: -100 to 5℃ Accuracy: ±0.5 to 0.05℃ Sample flow rate: 0.5 to 1.5 L/min Pressure: 0.08MPa to 0.12MPa Generator: Dew point, saturated moisture generator, closed loop Stabilization time: 20 minutes (when setting temperature changes by 20℃) Dry down time: 45 minutes (room temperature to -80℃) DP probe adapter: SUS316, nitrile O-ring, includes 3 FPG-PA1 DP probe screw: G1/2" standard screw, other options available Sample loop connection: FPG-60 swage lock 6mm FPG-80/100 swage lock VCR User interface: 7-inch touch screen LED Monitor interface: HDMI Device interface: USB Power supply: 100 to 250VAC 50/60Hz Case material: Aluminum Size: 450W x 300D x 180H Weight: 22 Kg

Temperature control in a large uniform temperature chamber!

○Occurrence Range Specifications Measurement Range (Relative Humidity): 10–95 %RH (5 %RH is optional) Measurement Range (Dew Point / Frost Point): -25–70 °Cdp, -23–0 °Cfp Chamber Temperature: 0–72 °C (options for expanded range: -10 and +85 °C) Chamber Pressure: Atmospheric Pressure Flow Rate: 5–20 L/min (optional: 5–50 L/min)

Capable of measuring low dew point ranges down to -60 ℃ with automatic calibration function. Moisture meter for gases.

Model: TE-660TR [Dew Point Specifications] Measurement Range: Standard Range -60 to +20 ℃dp (Maximum Scaling Range -100 to +80 ℃dp) Dew Point Accuracy: ±2℃ dp (at ambient temperature 25℃) Response Speed: 90% response speed -20 ℃dp → -60 ℃dp (under 5 minutes) -60 ℃dp → -20 ℃dp (under 15 seconds) [ppm Specifications] Measurement Range: 20 to 200,000 ppm Dew Point Accuracy: ±(5 ppm + 9% of indicated value) ppm (at ambient temperature 25℃) Analog Output: 4 – 20 mA (3-wire) RL < 500 Ω Resolution: 2 μA Digital Output: Modbus-RTU (up to 32 devices can be connected per bus) Temperature Influence: ±0.1 ℃dp/℃ approximately ----------------------------------------------- Power Supply: 18-28 VDC Current Consumption (at 24VDC): Normal: Max 40 mA Automatic Calibration: Max 120 mA Pressure Resistance Range: 0-8MPa

★Demo unit available for loan★ - Domestic dew point meter capable of measuring dew points from -100 to +20 ℃dp.

【Transmitter Section】 Model: TK-100TR Measurement Range: -100 to +20 ℃dp Dew Point Accuracy: ±2 ℃dp Power Supply: 12~28 VDC (Power Current 40 mA or more) Power Consumption: 1 W or less Output: 4-20 mA (Maximum Load Resistance 500 Ω) Flow Rate: 0.5 to 10 m/s (when directly inserted) 1 to 20 L/min (when using sensor block) Operating Pressure: 10-4 Pa to 30 MPa Cable: Twisted Pair, Shielded Cable Cable Length 2 m (Option: 1 to 1,000 m) Connection Diameter: 5/8 UNF (Option: 3/4 UNF, 1/4 VCR, 1/2 G) 【Monitor Section】 Model: TK-100MS Display: 5-digit LED Power Supply: 100 to 240 VAC ±10 % Output: 4-20 mA (Maximum Load Resistance 500 Ω) Alarm Output: 3 points, Relay Contact 1a, Capacity 3 A, 250 VAC Power Consumption: Approximately 8 W

Low-cost model for OEM oxygen concentration measurement in ppm/%!

1. Regarding the % Model 201LC Model: 201LC Measurement Range: 0-1 %, 0-5 %, 0-10 %, 0-25 % Measurement Accuracy: FS±1 % 2. Regarding the PPM Model 2001LC Model: 2001LC Measurement Range: 0-10/0-50/0-100/0-500/0-1000/0-5000 ppm, 0-1 % Measurement Accuracy: FS±1 % 3. Common Specifications for 201LC/2001LC Power Supply: 24 VDC Power Consumption: 10 W or less Output: 4-20 mA Flow Rate: 0.1 to 1.0 L/min Operating Pressure: Primary Side (upstream of the oxygen concentration meter): 3.0 kPaG to 0.1 MPaG Secondary Side (downstream of the oxygen concentration meter): Open to atmosphere Dimensions: 229 W × 129 H × 82 D mm

High-precision mirror-type dew point meter. It has a built-in pump, flow meter, and pressure sensor, allowing for accurate low dew point measurements.

Dew point measurement range: -60 to +20 ℃dp (varies by model) Humidity measurement range: 0.1 to +100 %RH Temperature measurement range: -50 to +100 ℃ Dew point measurement accuracy: ±0.1 ℃ Humidity measurement accuracy: ±0.5 %RH Temperature measurement accuracy: ±0.07 ℃ Digital output: RS232 Analog output: 2 points (user selectable from 4-20 mA, 0-1 V, 1-5 V, 0-10 V) Operating temperature and humidity: -10 to +40 ℃ / maximum 98 %RH (without condensation) Storage temperature: -20 to +50 ℃ Power supply: 100 to 120 VAC or 200 to 240 VAC, 50/60 Hz Power consumption: 200W or 250W (varies by model) Accessories: Pelican case, mirror cleaning cotton swabs, analog signal cable