シンキー Official site

An easier-to-use standard mixer.

【Features】 - Real-time display of rotation speed with an intuitive IF and VA panel - Achieves dispersion and degassing of various materials in a short time with two functions: "stirring" and "degassing" - Compatible with a wide range of materials from low to high viscosity - Adaptable to various material properties with cooling and heat-resistant adapters - 【Optional】Heat dissipation table (E-heat cooler ENs-10) reduces internal temperature by approximately 10°C - 【Optional】Multi-sensor for real-time measurement of material temperature and rotational speed inside the mixer, with data transfer to PC 【Our Strengths】 In the material processing process, "stirring" and "degassing" were long considered separate steps. The "Awatori Nentaro" was born from the idea of combining two rotations—self-rotation and orbital rotation—to process these two opposing processes simultaneously and in a short time. We offer a diverse lineup ranging from compact models for laboratory use to large-scale production models, receiving numerous inquiries from various fields both domestically and internationally. Shinky will continue to assist in solving material processing challenges and building a foundation for mass production with our unique material processing technology and know-how.

Improved stirring and defoaming power, IoT-compatible rotation and revolution mixer.

**Features** - Monitorable rotation speed during operation - Easy-to-read operation panel - Improved stirring and defoaming power - Suppression of temperature rise in the main unit - Communication functions support traceability and control from external devices **Our Strengths** Shinki Co., Ltd. has realized simultaneous processing of stirring and defoaming by combining two types of rotation: rotation and revolution. We assist in solving material processing challenges and laying the groundwork for mass production with our unique material processing technology and know-how.

Self-rotation and revolution type mixer Awatori Neritaro Atmospheric pressure type

● Method: Rotation / Revolution Propeller-less Mixing Method ● Model: ARE-501 ● Maximum Load Capacity: 1,100g * This is the total mass when materials, containers, and adapters are loaded into the cup holder. ● Standard Container: 650ml Plastic Container * The actual stirring amount may vary depending on the container, materials, and conditions, so please inquire. ● Power Supply: Voltage: Single-phase AC100V±10%, 50/60Hz Power Consumption: Approximately 50VA (standby) Maximum 1500VA (excluding startup) ● Safety Mechanisms: Door sensor, vibration sensor, rotation sensor, stirring/defoaming clutch sensor ● Transport Lock Mechanism: One location on the back of the main unit and one location on each side (inside) * Please release before use. ● Main Unit Dimensions: H686 × W500 × D500 (mm) ● Main Unit Weight: Approximately 100kg ● Accessories 1: Instruction manual (1 copy), AC cable (including 3P adapter) (1), 2 HDPE 650mL containers, 2 550mL containers, 2 300mL containers, 1 adapter for 300mL containers, (including 1 each of 3 types of O-rings) ● Accessories 2: Phillips screwdriver, L-shaped wrench (large and small), wrench (1 each), 4 hex bolts (for moving), CD (1)

Stirring of low to high viscosity materials and sub-micron level degassing. A rotary and orbital vacuum mixer equipped with a touch panel and communication functions.

■Maximum load capacity / 310g *Total mass including materials, containers, adapters, etc. ■Standard container / Volume 300 mL and 150 mL, made of HDPE ■Pressure type / Vacuum ■Power supply / Voltage: Single-phase AC100V±10% 50Hz/60Hz Power consumption: Approximately 50 VA (standby) maximum 1200 VA (operating)

Simultaneous processing of material mixing and dispersion, as well as submicron-level bubble removal. A medium-sized vacuum type machine trusted in production sites.

■Maximum load capacity / 700g *Total weight including materials, containers, adapters, etc. ■Standard container / 550mL resin container *The actual stirring amount may vary depending on the container, materials, and conditions, so please inquire. ■Power supply / Voltage: Single-phase AC200V–240V±10% (Note), 50/60Hz Power consumption: Approximately 50VA (in standby), maximum 2000VA (excluding startup) (Note: When used in combination with the separately sold pump unit PU-501, the voltage is single-phase AC200V±10%) ■Main unit dimensions / H815 × W500 × D595 (mm)

High efficiency of material charging for small volume syringes.

■Dimensions / H570 × W240 × D200 (mm) ■Weight / Approximately 6.6 kg ■Maximum Processing Capacity / Simultaneous filling of 4 syringes of 10 mL 【Features】 - Capable of filling small capacity syringes of 3, 5, and 10 mL without bubbles, which was previously difficult. - Can fill up to 4 syringes simultaneously, contributing to improved work efficiency. - Capable of filling materials with low to high viscosity. - When used in conjunction with the bubble-removing tool "Awatori Nentaro," it streamlines the process from stirring and degassing to syringe filling. - Easy to clean after filling.

A grinder that can crush materials from a minimum of 10mg to a maximum of 10g from micron level to 100 nanometers in as little as 2 minutes.

■Material amount / 100 mg to 10 g (optional tool: minimum 10 mg) ■Maximum slurry volume / 80 mL ■Grinding media / Zirconia balls (maximum media addition amount 35 g, maximum diameter 5 mm) ■Chamber internal temperature setting range / -20°C to +20°C ■Power supply / Voltage: Single-phase AC 100V ±10%, 50/60 Hz Power consumption: Standby: 55/53 VA [50/60 Hz] Standby cooling operation: 540/400 VA [50/60 Hz] Operating: Maximum 1400 VA ■Main body dimensions / H 785 mm × W 625 mm × D 600 mm