Sonic Corporation Blower & Air Knife System Case Study (Construction Materials Related)

ティックコーポレーション本社

Sonic Corporation's blowers and air knife systems are often used for water removal, liquid elimination, and drying purposes. The application we would like to introduce this time is an example from a certain construction equipment manufacturer. Considering the maintenance costs associated with contact-type painting, they were exploring methods to switch to a non-contact type. Sonic Corporation assisted with this. If you have any inquiries regarding our products, please contact our staff.

Date and time
Capital
Entry fee

Related product information

Sonic Corporation Tank Dryer
Sales of the "VT Tank Dryer," which incorporates a patented mechanism from Sonic Corporation's blowers, have begun.

◆◇◆Features◆◇◆ ◆Utilizes the heat from the blower to send a large volume of air heated to 70°C into the tank at a pressure of 1 psi (approximately 7 kPa), replacing the air several times per minute to forcibly dry, thereby reducing the drying time by 90%. ◆Drying time (depends on air volume and motor size) ranges from 10 to 60 minutes. ◆For more details, please contact us.
Sonic Corporation high-capacity blower (spiral blower)
A specialized blower for draining/drying that uses a small motor to spin at high speed and create a large airflow!

【Standard Product Specifications】 - Sonic 70 (Flow rate: 2~20 Nm3/min) - Sonic 85 (Flow rate: 2.4~24.1 Nm3/min) - Sonic 100 (Flow rate: 2.83~28.33 Nm3/min) - Sonic 150 (Flow rate: 4.25~35.4 Nm3/min) - Sonic 200 (Flow rate: 5.67~56.67 Nm3/min) - Sonic 300 (Flow rate: 8.5~70.8 Nm3/min) 【Special Blowers】 - VT blower with temperature variable device 【Accessories】 - HEPA filter - Cool Air (air cooling device) - Y Verter (air switching device) - Smart Tunnel (for beverages only) - Soundproof box - Piping and various other mounting accessories are available.
Sonic air knife (standard type) by Sonic Corporation *for blower use only
Improved air knife of the traditional Tear Drop (tear-shaped) design! Enhanced blowing efficiency!!

【Standard Specifications】 Air Supply Port: 3" (2" and 1" are also available) Slot Lengths: 51mm, 153mm, 305mm, 458mm, 508mm, 610mm, 762mm, 915mm, 1067mm, 1220mm, 1524mm, 1829mm, 2134mm, 2439mm *Custom lengths can also be provided according to your company's specifications. Material: Made of aluminum (SUS material is also available.) Operating Temperature: -40℃ to 135℃
Sonic Corporation Air Knife System Case Studies (rev.1)
"Sonic" drying is Sonic! We are introducing success stories and photos. [Simplified version]

【Publication Content】 ○Success Stories →Labeling Issues →Steel Industry [Removal of Residues on Plates] →Drying of Automotive Cylinders →Propane Gas Cylinders Not Fully Dried →Removal of Residual Water After Cleaning Contact Lens Pallets ○Photos ●For more details, please contact us or refer to the catalog.
Sonic Corporation Blower & Air Knife System (Blower Type) Video
Seeing is believing! Improve drying and reduce running costs by using a high-speed air knife to blow off air discharged from a high-volume blower!

A job that required a pressure of 0.4 MPa has been achieved with just 29 kPa! When comparing the airflow of a compressor and a sonic blower, 62.5 horsepower is needed to obtain an airflow of 7 m³/min with a compressor. In contrast, the sonic blower can achieve this with only 4 horsepower. The difference is significant compared to compressors and domestic blowers!