ティックコーポレーション 本社 Official site

The Lehira company's fine mist cooling spray nozzle is effective with ultra-fine mist spraying.

High-pressure fog nozzle for fine mist (ultra-fine mist) spraying, manufactured by Lehira for mist cooling systems 【Nozzle Basic Information】 Model Number: 2MN Series Spray Angle: 55° / 70° / 85° / 90° / 95° Material: SUS303 Orifice Diameter: 0.15mm / 0.2mm / 0.3mm / 0.4mm / 0.5mm Maximum Pressure: 10MPa (100bar) Connection: 10-24UNC Material: SUS303 【Easy Connection! Basic Information on Easy Pipe】 T-Joint for φ8, Sus304 Easy Pipe for φ8 (available in three lengths: 250mm, 500mm, 1000mm) with knurled finish, Sus304 10-24FD Support, Sus303 End Cap, Brass Plated Pump Power Supply AC100V 50/60Hz Pressure 7MPa Water Intake 1–4 L/min or 2–8 L/min options available

Using an electromagnetic valve, a small amount of liquid can be sprayed precisely and without waste, and even with intermittent application, the spray angle and particle size remain unchanged!

Rehira Corporation (a manufacturer of multi-channel jets) has started selling the VarioSpray II, a micro-dosing machine controlled by an electromagnetic valve, as a new product. The main feature is that while two-fluid nozzles (which mix air and liquid for spraying) are generally the mainstream method for achieving micro-sprays with small particle diameters, this system operates with a single fluid. By using an electromagnetic valve, it can maintain a consistent spray angle and particle diameter even during intermittent spraying. Particles formed by two fluids have speed, resulting in very poor coating efficiency and wasting expensive liquids. Taking this into consideration, the system improves coating efficiency by utilizing the speed of particles formed by a single-fluid nozzle, allowing for efficient spraying. We currently have a demo unit available. We would greatly appreciate your consideration of this opportunity.

We offer a variety of designs for dual-fluid spray nozzles!

Siphon Type Utilizes the suction force generated by the amount of air passing through the nozzle to draw liquid from the tank to the nozzle. By changing the height of the suction, it is possible to alter the flow of the liquid and the size of the particle diameter. This supply method is typically used to finely atomize very small amounts of liquid. Gravity Type Uses gravity to send liquid flow from a high tank to the nozzle. Uniform performance is achieved by maintaining a constant distance between the height of the liquid and the nozzle. Changes in this distance result in variations in flow rate and particle diameter. Pressure (Pressurized) Type Supplies liquid flow to the nozzle based on pressure. The solenoid valve regulates the pressure to achieve various performances. The particle diameter and flow rate are larger compared to the other two liquid supply methods and are dependent on the liquid in relation to air consumption. Two-Fluid Internal Mixing involves the collision and mixing of air and liquid within the nozzle. It is ideal for use with low-viscosity liquids and liquids with few impurities. Two-Fluid External Mixing atomizes the liquid into a mist through the collision of air and liquid after passing through the nozzle orifice. It is optimal for atomizing high-viscosity liquids.

Provides efficient and effective corrosion-resistant ceramic nozzles in flue gas desulfurization towers from spray nozzles for denitrification that require complete evaporation.

Rehila's spray nozzles for denitrification systems and flue gas desulfurization towers = Spray nozzles for denitrification systems = We offer single-fluid special spray nozzles 'Spillback' as well as two-fluid special spray nozzles 'VarioJet' and 'Laval'. We provide products tailored to complex specifications that require fine particle diameters. = Spray nozzles for flue gas desulfurization towers = From general ceramic hollow cone nozzles and full cone nozzles to Rehila's patented 'Twin Absorb' ceramic nozzles. We can offer a wide range of products, including SiSiC spiral nozzles. Connection methods can be provided in various shapes, including traditional flange type, line type, bushing type, and clamp type. = Mist separator = The world's first mist separator provided by a nozzle manufacturer. Together with the nozzle team, we have increasingly supplied not only power plants around the world but also chemical plants and, more recently, scrubbers for shipbuilding.

"Lechler" provides a transparent straight jet flow with the highest accuracy and precision!

【Lineup】 ○ Straight Nozzle 544 Series → Jet with a concentrated pattern that focuses on a point for long-distance reach → The most ideal flow rate, the highest jet force, concentrated straight jet ○ High-Pressure Straight Nozzle 546/548/550 Series → Extremely tight and non-dispersive straight jet that focuses on a point, with the highest impact → Material Nozzle Body: Stainless Steel 1.4305/303SS Insert: Hard Steel 1.4034S ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

Ideal gardening spray nozzle for gentle and even watering, perfect for seedling cultivation!

This Lehira-made spray nozzle produces a fine mist of water by allowing it to flow in a circular motion through a specially designed hole. It can achieve a range of up to 3 meters even with regular tap water, enhancing the efficiency of watering. Additionally, maintenance such as unclogging is also easy to perform.

The air nozzle manufactured by Lechler, affectionately known as the Multi-Channel Jet (combining low noise, energy efficiency, and high functionality).

【Product Lineup】 ○ Flat Type: 600.130/600.484/600.283/600.493/600.562 Series * These products are referred to as "Multi-Channel Jet." → Powerful air jets across the entire target, low noise level, low air consumption. ○ Flat Nozzle for Air or Saturated Steam: 679 Series → Particularly wide-angle and powerful air jets. → Comes with a retaining nut for easy nozzle replacement, simple jet alignment. ○ Tangential Nozzle for Saturated Steam: 686 Series → Wide-angle, powerful air jets. ○ Round Type: 600.326/600.388 Series → Powerful air jets that create a linear impact pattern. → Low noise level, low air consumption. ○ Straight Type Nozzle for Air and Saturated Steam: 544 Series → Powerful air jets that create a linear impact pattern. ○ Cluster (Porous) Straight Type Nozzle for Air and Saturated Steam: 540/541 Series → Powerful air jets blowing from 40 individual holes. ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.