ティックコーポレーション 本社 Official site

The Lehira company's fine mist cooling spray nozzle is effective with ultra-fine mist spraying.

High-pressure fog nozzle for fine mist (ultra-fine mist) spraying, manufactured by Lehira for mist cooling systems 【Nozzle Basic Information】 Model Number: 2MN Series Spray Angle: 55° / 70° / 85° / 90° / 95° Material: SUS303 Orifice Diameter: 0.15mm / 0.2mm / 0.3mm / 0.4mm / 0.5mm Maximum Pressure: 10MPa (100bar) Connection: 10-24UNC Material: SUS303 【Easy Connection! Basic Information on Easy Pipe】 T-Joint for φ8, Sus304 Easy Pipe for φ8 (available in three lengths: 250mm, 500mm, 1000mm) with knurled finish, Sus304 10-24FD Support, Sus303 End Cap, Brass Plated Pump Power Supply AC100V 50/60Hz Pressure 7MPa Water Intake 1–4 L/min or 2–8 L/min options available

We offer a variety of designs for dual-fluid spray nozzles!

Siphon Type Utilizes the suction force generated by the amount of air passing through the nozzle to draw liquid from the tank to the nozzle. By changing the height of the suction, it is possible to alter the flow of the liquid and the size of the particle diameter. This supply method is typically used to finely atomize very small amounts of liquid. Gravity Type Uses gravity to send liquid flow from a high tank to the nozzle. Uniform performance is achieved by maintaining a constant distance between the height of the liquid and the nozzle. Changes in this distance result in variations in flow rate and particle diameter. Pressure (Pressurized) Type Supplies liquid flow to the nozzle based on pressure. The solenoid valve regulates the pressure to achieve various performances. The particle diameter and flow rate are larger compared to the other two liquid supply methods and are dependent on the liquid in relation to air consumption. Two-Fluid Internal Mixing involves the collision and mixing of air and liquid within the nozzle. It is ideal for use with low-viscosity liquids and liquids with few impurities. Two-Fluid External Mixing atomizes the liquid into a mist through the collision of air and liquid after passing through the nozzle orifice. It is optimal for atomizing high-viscosity liquids.

"Lechler" provides a transparent straight jet flow with the highest accuracy and precision!

【Lineup】 ○ Straight Nozzle 544 Series → Jet with a concentrated pattern that focuses on a point for long-distance reach → The most ideal flow rate, the highest jet force, concentrated straight jet ○ High-Pressure Straight Nozzle 546/548/550 Series → Extremely tight and non-dispersive straight jet that focuses on a point, with the highest impact → Material Nozzle Body: Stainless Steel 1.4305/303SS Insert: Hard Steel 1.4034S ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

The air nozzle manufactured by Lechler, affectionately known as the Multi-Channel Jet (combining low noise, energy efficiency, and high functionality).

【Product Lineup】 ○ Flat Type: 600.130/600.484/600.283/600.493/600.562 Series * These products are referred to as "Multi-Channel Jet." → Powerful air jets across the entire target, low noise level, low air consumption. ○ Flat Nozzle for Air or Saturated Steam: 679 Series → Particularly wide-angle and powerful air jets. → Comes with a retaining nut for easy nozzle replacement, simple jet alignment. ○ Tangential Nozzle for Saturated Steam: 686 Series → Wide-angle, powerful air jets. ○ Round Type: 600.326/600.388 Series → Powerful air jets that create a linear impact pattern. → Low noise level, low air consumption. ○ Straight Type Nozzle for Air and Saturated Steam: 544 Series → Powerful air jets that create a linear impact pattern. ○ Cluster (Porous) Straight Type Nozzle for Air and Saturated Steam: 540/541 Series → Powerful air jets blowing from 40 individual holes. ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

Ideal gardening spray nozzle for gentle and even watering, perfect for seedling cultivation!

This Lehira-made spray nozzle produces a fine mist of water by allowing it to flow in a circular motion through a specially designed hole. It can achieve a range of up to 3 meters even with regular tap water, enhancing the efficiency of watering. Additionally, maintenance such as unclogging is also easy to perform.

Using an electromagnetic valve, a small amount of liquid can be sprayed precisely and without waste, and even with intermittent application, the spray angle and particle size remain unchanged!

Rehira Corporation (a manufacturer of multi-channel jets) has started selling the VarioSpray II, a micro-dosing machine controlled by an electromagnetic valve, as a new product. The main feature is that while two-fluid nozzles (which mix air and liquid for spraying) are generally the mainstream method for achieving micro-sprays with small particle diameters, this system operates with a single fluid. By using an electromagnetic valve, it can maintain a consistent spray angle and particle diameter even during intermittent spraying. Particles formed by two fluids have speed, resulting in very poor coating efficiency and wasting expensive liquids. Taking this into consideration, the system improves coating efficiency by utilizing the speed of particles formed by a single-fluid nozzle, allowing for efficient spraying. We currently have a demo unit available. We would greatly appreciate your consideration of this opportunity.

Provides efficient and effective corrosion-resistant ceramic nozzles in flue gas desulfurization towers from spray nozzles for denitrification that require complete evaporation.

Rehila's spray nozzles for denitrification systems and flue gas desulfurization towers = Spray nozzles for denitrification systems = We offer single-fluid special spray nozzles 'Spillback' as well as two-fluid special spray nozzles 'VarioJet' and 'Laval'. We provide products tailored to complex specifications that require fine particle diameters. = Spray nozzles for flue gas desulfurization towers = From general ceramic hollow cone nozzles and full cone nozzles to Rehila's patented 'Twin Absorb' ceramic nozzles. We can offer a wide range of products, including SiSiC spiral nozzles. Connection methods can be provided in various shapes, including traditional flange type, line type, bushing type, and clamp type. = Mist separator = The world's first mist separator provided by a nozzle manufacturer. Together with the nozzle team, we have increasingly supplied not only power plants around the world but also chemical plants and, more recently, scrubbers for shipbuilding.

Recommended for water-saving and energy-saving measures! Complies with hygiene and explosion-proof standards. Materials featuring installation examples available. For the food, beverage, and medical fields.

In industries that require tank cleaning, there are nozzles that cannot be used unless they meet various strict conditions. - 3A Sanitary Standards - EHEDG (European Hygienic Engineering and Design Group) - FDA (U.S. Food and Drug Administration) - regulation (EC) no. 1935/2004 - ATEX directive (explosion-proof specifications) As such, regulations are very strict in Europe and the United States. The German manufacturer Lechler provides nozzles that comply with these standards. Please make use of our spray nozzles for tank cleaning. We have prepared an LP that shows the cleaning effectiveness and efficiency by class. https://ticjapan.com/news/news-1282/ *Accessible from our company blog. For case studies, please refer to the URL below. https://tic-spray-solution.com/case-study/ *For more details, please refer to the materials. Feel free to contact us with any inquiries.

Lechler: The world's smallest nozzle! Its compact design allows for cleaning in tight spaces.

【Specifications】 Rotary tank cleaning nozzle Series: 500.234 Maximum tank diameter: within 1m Angle: 300° Connection size: M6 3/8 BSPF Material: Stainless steel / SUS316L Maximum temperature: 200°C Recommended operating pressure: 3bar [l/min] at p=3bar / 9.8 Installation direction: All directions Standards: FDA and Regulation (EC) No. 1935/2004 certified

Entry model nozzle for rotary tank cleaning!

【Specifications】 Rotary tank cleaning nozzle Series: 500.186 Recommended tank diameter: around 1m Angle: 300° Recommended operating pressure: 2bar [l/min] at p=2bar / 18 Connection size: 1/2 BSPF Material: POM, stainless steel / 316SS Maximum temperature: 50℃ Installation direction: downward

Lechler long-selling nozzle! It can accommodate a wide range of spray angles, flow rates, and connection options.

【Specifications】 Series: 569 Angle: 270°, 360° Maximum tank diameter: 3m Material: Stainless steel / SUS316L SS PEEK material Rulon 641 Maximum temperature: 140°C (ATEX version: 90°C) Recommended operating pressure: 2 bar Installation direction: All directions (ATEX version: vertical only) Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

The ≪Lechler≫ slip-on connection has obtained the 3-A standard. It is suitable for use in harsh corrosive environments.

【Specifications】 Rotary tank cleaning nozzle Series: 573/583 Maximum tank diameter: Approximately 3m Angles: 180°, 270°, 360° Maximum operating temperature: 95°C (a version up to 130°C can be produced upon request) Recommended pressure: 0.2MPa [l/min] at p=0.2MPa / 41 ? 225 Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and 3-A

The ≪Lechler≫ is a minimum tank cleaning nozzle with a length of approximately 30mm and an outer diameter of just φ9mm.

-

Gear-type tank cleaning nozzle! Capable of cleaning tanks up to 24m at low pressure!

Series: 5TM Angle: 360° Maximum tank diameter: 24m Material: SUS316L SS, PTFE, Carbon fiber Maximum temperature: 60°C (can be adapted up to 90°C upon request.) Recommended operating pressure: 0.5MPa Installation direction: All directions

"Lechler" unique pop-up nozzle! Installed at the same level as the wall surface. The nozzle in the rotating part pops out under pressure to perform cleaning.

【Specifications】 Series: 5P2/5P3 [l/min] at p=2bar / 14 ? 460 [l/min] at p=3bar / 17 ~ 563 Maximum tank diameter: Approximately 2.2m Material: Stainless steel / 316 SS Stainless steel / 316Ti SS (spring) Stainless steel / 316SS (snap ring) PEEK material / slide bearing FKM / (O-ring) Maximum temperature: 140℃ Recommended pressure: 2 bar 5P2 Opening pressure: Approximately 0.1MPa / Closing pressure: 0.5MPa 5P3 Opening pressure: Approximately 0.09MPa / Closing pressure: Approximately 0.05MPa Installation direction: All directions Standards: FDA and Regulation (EC) No. 1935/2004 certified

"Lechler" cleans with high impact and uniformity. It enables very effective cleaning through rotational control.

【Specifications】 Series: 5S2/5S3 Angle: 180°, 270°, 360° Maximum tank diameter: 8m Material: Stainless steel / 316L SS Stainless steel / 316 SS Stainless steel / 632 SS PEEK, PTFE, Zirconia, EPDM Maximum temperature: 95℃ Recommended operating pressure: 0.5MPa Installation direction: All directions Standards: FDA and Regulation (EC) No. 1935/2004 compliant

"Lechler" enables effective foam cleaning at low pressure!

【Specifications】 Series: 594/595 Series Angle: 360° Maximum tank diameter: Approximately 2.5m Material: Stainless steel / 316L SS PEEK material EPDM O-ring (EHEDG version) Maximum temperature: 100°C (short term: up to 140°C) Recommended operating pressure: 3bar Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and EHEDG

Powerful cleaning with a special shape nozzle from Lechler! This shape is unique to Lechler!

【Specifications】 Series: 577 Angles: 180°, 270°, 360° Maximum tank diameter: 5.5m Material: Stainless steel / 316L SS, PTFE Maximum temperature: 90°C Recommended operating pressure: 3bar Installation direction: Vertical Standards: Compliant with FDA and Regulation (EC) No. 1935/2004

The ≪Lechler≫ powerful straight spray cleans stubborn dirt stuck inside the tank!

【Specifications】 Series: 5TA Angle: 360° Maximum tank diameter: 12.3m Material: Stainless steel / 316L SS Stainless steel / 632 SS PEEK, PTFE, zirconia, EPDM Maximum temperature: 95℃ Recommended operating pressure: 0.5MPa Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

The high-performance solid jet spray with Lechler gear control effectively removes stubborn dirt!

【Specifications】 Series: 5TB Maximum tank diameter: 15m Material: Stainless steel / 316L SS Stainless steel / 632 SS PTFE / PEEK material / Zirconium oxide / EPDM Maximum temperature: 95℃ Recommended pressure: 0.5MPa Installation direction: All directions Recommended filter: 80 mesh Weight: 4kg Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

Efficiently clean the tank with Lechler's innovative slot design!

Rotary Tank Cleaning Nozzle Series: 5MC Maximum Tank Diameter: Approximately 1.8m Angles: 60°, 180°, 360° Material: SUS316L / SUS440C [Hastelloy Specification: Hastelloy C22 / C276] Environmental Temperature: Up to 140°C Recommended Pressure: 0.2MPa Installation Direction: Any direction Recommended Filter: 170 mesh Acquired Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

Lecher: Efficiently cleans the tank with an innovative slot design!

Rotary Tank Cleaning Nozzle Series: 5MI Maximum Tank Diameter: 2.6m Angles: 60°, 180°, 360° Material: SUS316L / SUS440C [Hastelloy Specification: Hastelloy C22 / C276] Environmental Temperature: Up to 140°C Recommended Pressure: 0.2MPa Installation Direction: Any direction Recommended Filter: 170 mesh Obtained Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

"Lechler" is perfect for cleaning in limited spaces with its compact design!

Material: SUS-316L / SUS-440C 【Hastelloy Specification: Hastelloy C22 / C276】 Maximum Tank Diameter: Approximately 1.6m Ambient Temperature: Up to 140℃ Recommended Pressure: 0.2MPa Installation Direction: All Directions Recommended Filter: 170 Mesh Acquired Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

Cleaning with effective flat jet nozzles. Explosion-proof specifications are also available.

【Specifications】 Rotary tank cleaning nozzle Series: 566 Angle: 180°, 360° Maximum tank diameter: 1.7m Material: Stainless steel / SUS316L, PEEK material Maximum temperature: 130°C (ATEX version: 90°C) Recommended operating pressure: 2bar [l/min] at p=2bar / 15 ? 21 Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

Lechler foam spray is possible! It can be used in corrosive environments.

【Specifications】 Rotary tank cleaning nozzle Series: 500.191 Angle: 180°, 270°, 360° Maximum tank diameter: approximately 1m Material: PVDF Maximum temperature: 90°C Recommended operating pressure: 2 bar [l/min] at p=2 bar / 13 ? 20 Installation direction: all directions Standards: FDA, Regulation (EC) No. 1935/2004

Lechler's tank cleaning spray nozzle PopUp Whirly now available in ATEX version (explosion-proof type).

It is installed horizontally within the wall and used. The rotating nozzle pops out from the housing at a certain water pressure. The PopUp Whirly is ideal for pipe cleaning and foam spraying. It is particularly used in the food and beverage industry, pharmaceutical industry, and chemical industry. The material used is mainly SUS316L. The recommended maximum tank diameter is up to 2m. The recommended pressure is 0.5MPa (typically 0.2MPa).

In addition to the ≪Lechler≫ rotary tank cleaning nozzle, we also offer fixed spray balls! A comprehensive lineup is available!

【Lineup】 ○ Miniature nozzles for barrels and drums made of stainless steel → Precision rotating nozzle 500.234 series (smallest size) → Ultra-small rotating nozzle 566 series ○ Miniature nozzles for barrels and drums → Mini Whirly (rotating type) 500.186 series → Ultra-small rotating nozzle 500.191 series ○ MicroSpinner/MiniSpinner 5MC/5MI series ○ FoamWhirly 594/595 series ○ Rotating nozzle 569 series ○ Teflon rotating nozzle, especially for CIP 573/583 series ○ ACCU Clean made of stainless steel 515 series ○ High Impact Tank Cleaning Machine 5TM series ○ Static spray balls 527/540/541/591 series ○ Pop-up nozzle 5P2/5P3 series ○ Gyro nozzle 577/579 series ○ Hygienic Whirly 594/595 series ○ XactClean 5W2/5W3 ○ IntenseClean Hygienic 5TA/5TB/5TM series

Would you like to save energy by conserving water through tank cleaning?

In industries that require tank cleaning, there are nozzles that cannot be used unless they meet various strict conditions. - 3A Sanitary Standards - EHEDG (European Hygienic Engineering and Design Group) - FDA (U.S. Food and Drug Administration) - regulation (EC) no. 1935/2004 - ATEX directive (explosion-proof specifications) As such, there is very strict management in Europe and the United States. The German manufacturer Lechler provides nozzles that comply with these standards. Please make use of them for tank cleaning spray nozzles. *For more details, please refer to the materials. Feel free to contact us as well.

Sturdy and compact design! Usable with steam and air!

【Specifications】 Fixed Spray Ball Series: 540/541 Angle: 240° [l/min] at p=2bar / 18 ? 118 Connection Size: 1/2 BSPF Maximum Tank Diameter: 9.5m Material: Stainless Steel / SUS303 Maximum Temperature: 200℃ Recommended Operating Pressure: 3bar Installation Direction: All Directions Standards: FDA and Regulation (EC) No. 1935/2004 compliant About Fixed Spray Balls: The cleaning method differs from that of rotating nozzles, but they are essential for specific applications. - No moving parts - Self-draining - Easy installation and maintenance - Suitable for sanitary applications Compared to rotating nozzles, fixed spray balls typically require 2 to 3 times the flow rate.

Adaptable to a wide range of applications due to design and product specifications! Can be used even under high hygiene requirements and high-temperature environments.

【Specifications】 Fixed Spray Ball Series: 591 Angle: 180°, 360° [l/min] at p=2bar / 14 ? 460 [l/min] at p=3bar / 17 ~ 563 Maximum tank diameter: 5.5m Material: Nozzle - Stainless Steel / SUS316Ti Pin - Stainless Steel / SUS316L Maximum temperature: 200℃ Recommended operating pressure: 3bar Installation direction: All directions Standards: FDA and Regulation (EC) No. 1935/2004 certified About the Fixed Spray Ball: The cleaning method differs from that of rotating nozzles, but it is essential for specific applications. - No moving parts - Self-draining - Easy installation and maintenance - Suitable for sanitary applications Compared to rotating nozzles, fixed spray balls typically require 2 to 3 times the flow rate.

Certified with 3-A! Suitable for high hygiene environment conditions.

【Specifications】 Fixed Spray Ball Series: 527 Angle: 360° [l/min] at p=2bar / 60 ? 420 [l/min] at p=3bar / 73 ~ 514 Maximum tank diameter: 8.2m Material: Stainless steel / SUS316L Maximum temperature: 200℃ Recommended operating pressure: 1.5bar Installation direction: All directions Standards: 3-A, FDA and Regulation (EC) No. 1935/2004 certified About the Fixed Spray Ball: The cleaning method differs from that of rotating nozzles, but it is essential for specific applications. - No moving parts - Self-draining - Easy installation and maintenance - Suitable for sanitary applications Compared to rotating nozzles, fixed spray balls typically require 2 to 3 times the flow rate.

Adaptable to a wide range of applications due to design and product specifications! Can be used even under high hygiene requirements and high-temperature environments.

【Specifications】 Fixed Spray Ball RinseClean Series: 5B2/5B3 Angle: 180°, 360° Flow Rate: 15lit/min ? 670lit/min @ 0.2MPa Maximum Tank Diameter: 5.5m Material: Nozzle - Stainless Steel / SUS316L Pin - Stainless Steel / SUS316L Maximum Temperature: 200℃ Recommended Operating Pressure: 2bar Installation Direction: All Directions Standards: FDA and Regulation (EC) No. 1935/2004 compliant About Fixed Spray Balls: The cleaning method differs from that of rotating nozzles, but it is essential for specific applications. - No moving parts - Self-draining - Easy installation and maintenance - Suitable for sanitary applications Compared to rotating nozzles, fixed spray balls typically require 2 to 3 times the flow rate.

"Lechler" exhibits excellent characteristics for circular spraying (full cone) that requires a super uniform spray distribution.

【Specifications】 Full cone nozzle (vertical axis type) Series / 403 Angle / 90° 120° 400~1250 [l/min] at p=2bar Connection size / 2-1/2 BSPF 3 BSPF 3-1/2 BSPF 4 BSPF

Lechler disk type 180° wide spray angle full cone nozzle (wide area pattern)

【Specifications】 Porous nozzle Series: 525 Angle: 180° 7.1~80 [l/min] at p=2bar Connection size: 1/2 BSPF

"Lechler" provides a transparent straight jet flow with the highest accuracy and precision!

【Product Lineup】 ○ Straight Nozzle 544 Series → A jet with a long reach that concentrates on a point with a focused jet pattern. → The most ideal flow rate, the highest jet force, and a concentrated straight jet. ○ High-Pressure Straight Nozzle 546/548/550 Series → An extremely tight and non-dispersive straight jet that concentrates on a point, providing the highest impact. → Material Nozzle Body: Stainless Steel 1.4305/303SS Insert: Hard Steel 1.4034S ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

Lechler provides a transparent straight jet stream with the highest accuracy and precision!

【Product Lineup】 ○ Straight Nozzle 544 Series → A jet with a long distance that concentrates on a point with a jet pattern → The most ideal flow rate, the highest jet power, concentrated straight jet ○ High-Pressure Straight Nozzle 546/548/550 Series → An extremely tight and non-dispersing straight type that concentrates on a point, with the highest impact → Material 　Nozzle Body: Stainless Steel 1.4305/303SS 　Insert: Hard Steel 1.4034S ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

"Lechler" provides a transparent straight jet flow with the highest accuracy and precision!

【Lineup】 ○ Straight Nozzle 544 Series → A jet with a long range that concentrates on a point with a jet pattern → The most ideal flow rate, the highest jet power, and a concentrated straight jet ○ High-Pressure Straight Nozzle 546/548/550 Series → An extremely tight and non-dispersive straight type that concentrates on a point, providing the highest impact → Material 　Nozzle Body: Stainless Steel 1.4305/303SS 　Insert: Hard Steel 1.4034S ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

"Lechler" was manufactured for uniform liquid spraying and jet pressure!

【Lineup】 ○632/633 Series → Uses standard tapered screws ○610 Series/612 Series → Compact design, ideal for narrow installation spaces ○616/617 Series → Uniform ridge distribution, improved clogging prevention, more powerful jet ○For Retaining Nuts 652 Series/656/657 Series → Incorporates retaining nuts, easy nozzle replacement, simple jet arrangement ○With Automatic Positioning Guide 660 Series/664/665 Series → Automatically determines nozzle position with the automatic positioning guide ○With Insert Type Easy Detachable Cap 646 Series → Instant and easy installation with insert type easy detachable cap ○Tang Nozzle 688/689 Series → Narrow spray angle with a powerful flat jet pattern, resistant to clogging ○Tang Flat Nozzle 686 Series → Wide-angle flat jet with clear spray pattern, particularly resistant to clogging ○Various other types available ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

"Lechler" was manufactured for the uniform spraying of liquids and jet pressure!

【Lineup】 ○ Series 632/633 → Adopts standard tapered screws ○ Series 610/612 → Compact design, ideal for narrow installation spaces ○ Series 616/617 → Uniform ridge distribution, improved clogging prevention function, more powerful jet ○ Series 652 for retaining nuts / Series 656/657 → Incorporates retaining nuts, easy nozzle replacement, simple jet arrangement ○ Series 660 / 664/665 with automatic positioning guide → Automatically determines the nozzle position with the automatic positioning guide ○ Series 646 with snap-on easy detachable cap → Instant and easy installation with snap-on easy detachable cap ○ Series 688/689 Tang Nozzle → Narrow spray angle with a powerful flat jet pattern, resistant to clogging ○ Series 686 Tang Flat Nozzle → Wide-angle flat jet with a clear spray pattern, particularly resistant to clogging ○ Various other types available ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

A ball joint type flat jet spray nozzle that can fix the positioning of the Lechler spray nozzle at a swivel angle of 30°.

【Specifications】 Special Type / Flat Nozzle Series / 676 Angle / 20° 30° 45° 60° 90° 120° 0.08~8 [l/min] at p=2bar Connection Size / 3/8 BSPF Welded

An easy and inexpensive flat jet spray nozzle that fits into appropriately sized holes for ≪Lechler≫ piping.

【Specifications】 Special Type / Flat Nozzle Series / 612.xxx.5E.03 Angle / 90°120° 0.63~4 [l/min] at p=2bar Connection Size / Pipe Insertion

We offer a variety of designs for dual-fluid spray nozzles!

【Lineup】 ○136.1/166.1 Series → Fine full cone spray with liquid containing air or gas → Liquid pressurized type, internal mixing ○136.2/166.2 Series → Fine full cone spray with liquid containing air or gas → Liquid pressurized type, internal liquid mixing ○136.3/166.3 Series → Fine full cone spray with liquid containing air or gas → Siphon type, external liquid mixing ○136.4/166.4 Series → Spray liquid containing air and gas into a fine flat shape → Liquid pressurized type, internal liquid mixing ○136.5/166.5 Series → Spray liquid containing air and gas into a fine flat shape → Siphon type, internal liquid mixing ○136.6/166.6 Series → Spray liquid containing air and gas into a fine flat shape → Liquid pressurized type, external liquid mixing ○140 Series → Particularly fine full cone spray, siphon type, internal liquid mixing → Integrated adjustment device ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

We offer vertical and horizontal full cone nozzles, as well as cluster head nozzles from Lechler!

【Product Lineup】 ○ Vertical Axis Type 460/461 Series → Very uniform spray pattern → Large opening due to maximized X-type swirl insert ○ Vertical Axis Type 405 Series / 403 Series → Very uniform spray pattern ○ Vertical Axis Type 468 Series for Retaining Nuts → Nut-integrated vertical axis full cone nozzle ○ Horizontal Axis Type 422 Series / Plastic 422/423 Series → Liquid supplied to be horizontal axis → No swirl insert, resistant to clogging, stable spray angle, uniform spray ○ Horizontal Axis Type Quick Connect System 422 Series → Can be installed quickly and safely without tools, space-saving → Resistant to clogging and maintenance-free, high resistance to temperature and chemicals ○ Cluster Head Nozzle 502/503 Series → Full cone spray with several hollow cone sprays overlapping ○ Reflector Plate Nozzle 525 Series → Full cone spray, resistant to clogging due to no swirl insert ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

"Lechler" is designed for the uniform spraying of liquids and jet pressure!

【Lineup】 ○ Series 632/633 → Adopts standard tapered screws ○ Series 610/612 → Compact design, ideal for narrow installation spaces ○ Series 616/617 → Uniform ridge distribution, improved clogging prevention, more powerful jet ○ For retaining nuts: Series 652/656/657 → Incorporates retaining nuts, easy nozzle replacement, simple jet arrangement ○ With automatic positioning guide: Series 660/664/665 → Automatically determines nozzle position with the automatic positioning guide ○ With plug-in easy detachable cap: Series 646 → Instant and easy installation with plug-in easy detachable cap ○ Tang nozzle: Series 688/689 → Narrow spray angle with powerful flat jet pattern, resistant to clogging ○ Tang flat nozzle: Series 686 → Wide-angle flat jet with clear spray pattern, particularly resistant to clogging ○ Various other types available ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

"Lechler" offers industrial standard strainers with a maximum pressure of 12 bar and basket strainers with 8 bar!

【Lineup】 [Standard Industrial Strainer with Maximum Pressure of 1.2MPa] ○ For working pressure up to 1.2MPa ○ Large screen area ○ Screen mesh is color-coded → 0.6mm: White → 0.3mm: Blue → 0.2mm: Red ○ Easy to handle, robust design, slim body [Basket Strainer, Maximum Pressure of 0.8MPa] ○ Designed for high flow with low pressure loss ○ Equipped with a flow deflector → Can trap dirt that would obstruct the screen insertion before the outlet at the bottom of the filter ○ Dirt can be easily removed from below through an offset outlet at the bottom ○ Two pressure gauges can be connected to control pressure loss occurring during screen insertion ○ Various methods for screen insertion are available ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

Lechler TWISTLOC easy nozzle replacement system, plug-in easy attachment and detachment system, etc. are available!

【Lineup】 ○ TWISTLOC Easy Nozzle Replacement System → Allows for instant replacement of the Rehira TWISTLOC nozzle → Promises quick installation and replacement, as well as cost savings ○ Plug-in Easy Detachment System ○ Eyelet Clamp / Retaining Nut ○ Socket / Nipple ○ Ball Joint → Can rotate freely up to 30° → No sealing required, no wear, long lifespan even after multiple adjustments ○ Check Valve / Filter ○ Gasket / Teflon Sealing Tape ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

"Lechler" patented horizontal full cone nozzle solves clogging issues.

【Specifications】 Full cone nozzle (horizontal axis type) Series / 422 Angle / 60° 90° 120° 1~63 l/min at p=2bar Connection size / 1/4 BSPT 3/8 BSPT 1/2 BSPT 3/4 BSPT

"Lechler" patented horizontal full cone nozzle solves clogging issues.

【Specifications】 Full cone nozzle (horizontal axis type) Series / 422 quick release system Angle / 60° 90° 120° 1~4 l/min at p=2bar Connection size / Assembly by quick release

"Lechler" spray nozzle with a powerful flat spray and acute angle.

【Specifications】 High-impact flat spray nozzle (tong-type nozzle) Series: 688, 689 Angle: 45° 8~31.5 [l/min] at p=2 bar Connection size: 3/8 BSPT, 3/4 BSPF

"Lechler" flood (wide spray width) spray nozzle for unclogging.

【Specifications】 Tongs-type nozzle Series / 686 Angle / 140° 0.63~28 [l/min] at p=2bar Connection size / 1/8 BSPT, 1/4 BSPT, 3/8 BSPT

Lechler Flood (Wide Spray Width) Spray Nozzle for Clog Prevention (Retainer Type)

【Specifications】 Tongs-type nozzle Series: 684 Angle: 140° 0.63~10 [l/min] at p=2bar Connection size: 3/8" lock nut

Spray nozzle that can store the installation position in 'memory'.

【Specifications】 Low-pressure nozzle Series: 676, 677, MEMOSPRAY Angle: 60° 70° [l/min] at p=2bar / 4?31.5 Connection size: Includes clamps for pipes of the following sizes: 1-1/4", 1-1/2"

With the ≪Lechler≫ piping, you can easily install a ball-shaped flat spray nozzle, enabling high-performance flat jet spraying!

【Specifications】 Special Type / Flat Nozzle Series / 676 Easy Clip Angle / 60° 6.3~20 [l/min] at p=2bar Connection Size / Clamp for the following pipe sizes included 1", 1-1/4", 1-1/2", 2"

Rehila's spray technology contributes to the improvement of your company's production processes and technology!

【Contents】 ○ Tradition and Development of Spray Technology → Research and Development for a Better Future → The advantages lie in our productivity → Regarding Quality → Recording Measurement Values ○ Main Industries → Surface Treatment → Chemical Industry → Food Industry → Machine Tools → Pulp and Paper Industry → Fire Protection → Air Conditioning → Steel Industry → Power and Environmental Technology → Agriculture ○ Which Spray Shape is Suitable? → Single Fluid Spray → Two-Fluid Spray → Two-Fluid Flat Nozzle → Two-Fluid Full Cone Nozzle → Vertical Axis Hollow Cone Nozzle → Horizontal Axis Hollow Cone Nozzle → Vertical Axis Full Cone Nozzle → Horizontal Axis Full Cone Nozzle → Flat Nozzle → Tangential Nozzle → Straight Nozzle → Air Nozzle → Tank Cleaning Nozzle → Static Spray Ball ○ Nozzle Performance and Service Data → Flow Rate, Pressure, Spray Angle → Liquid Distribution → Spray Impact → 36 Particle Sizes and Particle Distribution ○ Customer Needs Determine Nozzle Material ○ Durability ○ Accessories ○ Installation Method for Reheating Nozzles ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

We offer vertical axis hollow cone nozzles and horizontal axis hollow cone nozzles from Lechler!

【Product Lineup】 ○ Vertical Axis Type 212 Series → Extremely fine mist-like hollow cone spray ○ Vertical Axis Type 214/216 Series → Fine and uniform hollow cone spray ○ Vertical Axis Type 2TR Series for Retaining Nuts → Hollow cone spray nozzle with ceramic insert → Incorporates retaining nut, fine and uniform hollow cone spray ○ Horizontal Axis Type Brass 302/308 Series → Uniform hollow cone spray → No whirl insert, less prone to clogging ○ Horizontal Axis Type Plastic 302 Series → Uniform hollow cone spray → No whirl insert, less prone to clogging ○ Horizontal Axis Type Plug-in Simple Detachable System 302 Series → Time-saving alternative to screw design → Fast and safe installation → Automatic setting of spray direction ○ Horizontal Axis Type 350 Series ○ Horizontal Axis Type 304/306/307 Series ○ Horizontal Axis Type 373 Series "Inclined Bottom"/309 ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

The Lechler 490/491 model, with its unique structure and patented design, is a high flow type that is resistant to clogging and maintains a consistent spray angle despite pressure fluctuations.

Material: SUS316L (cast) Maximum operating temperature: 400°C Recommended pressure: 0.1MPa (up to maximum pressure of 1MPa)

"Lechler" is designed for the uniform spraying of liquids and jet pressure!

【Lineup】 ○632/633 Series → Uses standard tapered screws ○610 Series/612 Series → Compact design, ideal for narrow installation spaces ○616/617 Series → Uniform ridge distribution, improved clogging prevention, more powerful jet ○For Retaining Nuts 652 Series/656/657 Series → Incorporates retaining nuts, easy nozzle replacement, simple jet arrangement ○With Automatic Positioning Guide 660 Series/664/665 Series → Automatically determines nozzle position with the automatic positioning guide ○With Plug-in Simple Detachable Cap 646 Series → Instant and easy installation with plug-in simple detachable cap ○Tang Nozzle 688/689 Series → Narrow spray angle with a powerful flat jet pattern, resistant to clogging ○Tang Flat Nozzle 686 Series → Wide-angle flat jet with a clear spray pattern, especially resistant to clogging ○Various other types available ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

What is "one stone, three birds"? It refers to an air nozzle that, while being low noise (quiet) and reducing air consumption (energy-saving), also has a strong impact force (high functionality).

It can reduce generated noise more effectively while providing impact force while suppressing air consumption and air pressure. Leading the best-selling FL-600E, compressed air is supplied from the air supply side to the nozzle opening, allowing for a powerful blow with strong impact force from that opening. Due to the air flow being laminar along with the powerful injection force, it reduces waste of air consumption and noise levels caused by turbulent injection, making it an environmentally friendly product that is gentle on people. The blow patterns are available in two types: flat and round. Additionally, due to the manufacturer's unique design, there is no air diffusion. The air nozzle FL-600E comes standard with an orifice cover (the world's first), which allows for the closing of the injection port. This helps to minimize unnecessary air blowing to unwanted areas. Approval Standards: - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 for plastics - TSCA5 compliant

"Lechler" is designed for the uniform spraying of liquids and jet pressure!

【Lineup】 ○ Series 632/633 → Adopts standard tapered screws ○ Series 610/612 → Compact design, ideal for narrow installation spaces ○ Series 616/617 → Uniform ridge distribution, improved clogging prevention, more powerful jet ○ For retaining nuts: Series 652/656/657 → Incorporates retaining nuts, easy nozzle replacement, simple jet arrangement ○ With automatic positioning guide: Series 660/664/665 → Automatically determines nozzle position with the automatic positioning guide ○ With plug-in simple detachable cap: Series 646 → Instant and easy installation with plug-in simple detachable cap ○ Tang nozzle: Series 688/689 → Narrow spray angle with a powerful flat jet pattern, resistant to clogging ○ Tang flat nozzle: Series 686 → Wide-angle flat jet with a clear spray pattern, particularly resistant to clogging ○ Various other types available ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.

"Lechler" is the only manufacturer of spray nozzles that can supply mist separators. We deliver the latest mist separators!

The only manufacturer capable of supplying mist separators for spray nozzle manufacturers. Lehiller's mist separators (demisters) are used in over 100 applications across various industries. Supply range: Regarding the requirements for gas-water separation technology, we can provide single or multiple stage systems for both vertical and horizontal gas flow directions: - Vane-type mist separators for horizontal or vertical gas flow - Vane-type mist separators with housing - Vane-type mist separators designed with pressure vessels in compliance with PED 97/23/EC, AD 2000, ASME, or other special regulations - Spin-vane separators - Inlet distributors - Vane-type mist separators combined with condensers or oil-water separation treatment devices - Flow systems for cleaning mist separators - CFD technology to improve the functionality of mist separator systems *Lehiller is a member of EGCSA (exhaust gas cleaning system association).