ティックコーポレーション 本社 Official site

The spray nozzle newly developed by Lehira! A suitable spray nozzle is essential for producing powders!!

Lechler DryMASTER Standard Type and Type with Check Valve 【Technical Data】 - Combination of 900 types of orifice disks and chambers is possible - Flow rate range: 10~12,000 lit/h - Maximum operating pressure: 46.5MPa at 20℃ (theoretically possible up to 100MPa) - Maximum operating temperature: 250℃ - Spray angle: 50~110℃ - Particle size distribution: 30μm~220µm Lechler DryMASTER Low Flow Type - Combination of 60 types of orifice disks and chambers is possible - Flow rate range: 0.27~4.2 lit/h - Maximum operating pressure: 46.5MPa at 20℃ (theoretically possible up to 100MPa) - Spray angle: 30~90℃ - Particle size distribution: 30μm~220µm ◇◆Additionally, it is possible to provide with a polynomial and nozzle lance◇◆

We offer a variety of designs for dual-fluid spray nozzles!

Siphon Type Utilizes the suction force generated by the amount of air passing through the nozzle to draw liquid from the tank to the nozzle. By changing the height of the suction, it is possible to alter the flow of the liquid and the size of the particle diameter. This supply method is typically used to finely atomize very small amounts of liquid. Gravity Type Uses gravity to send liquid flow from a high tank to the nozzle. Uniform performance is achieved by maintaining a constant distance between the height of the liquid and the nozzle. Changes in this distance result in variations in flow rate and particle diameter. Pressure (Pressurized) Type Supplies liquid flow to the nozzle based on pressure. The solenoid valve regulates the pressure to achieve various performances. The particle diameter and flow rate are larger compared to the other two liquid supply methods and are dependent on the liquid in relation to air consumption. Two-Fluid Internal Mixing involves the collision and mixing of air and liquid within the nozzle. It is ideal for use with low-viscosity liquids and liquids with few impurities. Two-Fluid External Mixing atomizes the liquid into a mist through the collision of air and liquid after passing through the nozzle orifice. It is optimal for atomizing high-viscosity liquids.

Provides efficient and effective corrosion-resistant ceramic nozzles in flue gas desulfurization towers from spray nozzles for denitrification that require complete evaporation.

Rehila's spray nozzles for denitrification systems and flue gas desulfurization towers = Spray nozzles for denitrification systems = We offer single-fluid special spray nozzles 'Spillback' as well as two-fluid special spray nozzles 'VarioJet' and 'Laval'. We provide products tailored to complex specifications that require fine particle diameters. = Spray nozzles for flue gas desulfurization towers = From general ceramic hollow cone nozzles and full cone nozzles to Rehila's patented 'Twin Absorb' ceramic nozzles. We can offer a wide range of products, including SiSiC spiral nozzles. Connection methods can be provided in various shapes, including traditional flange type, line type, bushing type, and clamp type. = Mist separator = The world's first mist separator provided by a nozzle manufacturer. Together with the nozzle team, we have increasingly supplied not only power plants around the world but also chemical plants and, more recently, scrubbers for shipbuilding.