The above specifications have been established. In our product line, the "Premier RPA Rubber Processing Analysis Device" can accommodate this standard test. Conventional Mooney viscometers with rotors were unable to automatically transport samples. However, with the rotorless design, our product line can achieve automation of tests through the use of an auto-sampler, thereby improving testing efficiency. We would appreciate it if you could contact us for more details.

JIS K6297/ISO13145 has been established. Our product line can accommodate testing according to this standard with the "Premier RPA Rubber Processing Analysis Device." Conventional Mooney viscometers with rotors could not automatically transport samples. However, with the rotor-less design, our product line now allows for automation of testing through an auto-sampler, improving testing efficiency. For more details, please contact us.

In the Premier series, you can change the emission color. It is easy to see at a glance whether a measurement is in progress or has been completed, and whether the measurement results are within the set pass range. This is convenient for those monitoring from a distance or in noisy environments. The emission colors are nine in total, four of which (red, green, blue, amber) can be set to flash. The logo lighting settings are done in "Workbench." First, click on the Instrument tag lined up on the Workbench, then click on Options. When you click on "Logo Lighting," the screen shown in the lower right will appear. To enable the emission, select Enable logo colors. To make it flash, select Flash. The area surrounded by the green frame indicates the color, and the state of that color being illuminated is surrounded by the red frame. In the same screen, under Instrumental Parameters, there is "Test Actions." Here, you can choose whether to force cool the die temperature to the set Ready temperature using air after the measurement is completed, allow natural cooling, or maintain the end temperature without cooling. For more details, please contact our company.

Introducing the Premier RPA rubber processing analysis device. Compared to the conventional model (RPA2000), the optional specifications of the RPA2000 have been upgraded to standard specifications in the Premier RPA. When updating to the Premier RPA, tests that were previously impossible will now be possible. Attached is a comparison of specifications with the RPA2000, which you can use for your consideration of the update. <Introduction to tests possible with RPA> 1) Temperature dispersion test: A function that cannot be performed with a vulcanization testing machine. - Testing can be conducted while increasing or decreasing the temperature. - Data on the temperature-dependent changes in Tan δ (light green in the right diagram) can be obtained. 2) Pain effect test (ASTM D80529) (strain dispersion test): This checks the state of the mixing. - Differences in the state of mixing can be evaluated with uncured samples. - There is a possibility of omitting other tests.