東洋精機製作所 Official site

It is a universal testing machine with a maximum load capacity of 50 kN and 20 kN.

■Load capacity: max. 50kN・20kN ■Stroke: 940mm ■Test speed: 0.0005–1000mm/min ■Power supply: Three-phase, AC200V, 50/60Hz, 10A *Options Various constant temperature chambers, data processing device [Model CON], compact printer [Model PS-A1], dedicated stand (S) [Model BED-S], etc. For other specifications, please refer to the catalog.

It is a universal material testing machine with a maximum load capacity of 20 kN.

■Maximum load capacity: 20kN ■Test speed: 0.0005 to 1000 mm/min. (Note: Model VG20F is up to 500 mm/min.) ■Stroke: 1100 mm *Options Data processing software [Model WD], various constant temperature baths, optional crosshead for constant temperature baths [Model OC], dedicated stand (for VG) [Model BED-VG], small printer [Model PS-A1], splash prevention cover (for Strolograph VG), and others. For other specifications, please refer to the catalog.

This is a tabletop universal material testing machine with a maximum load capacity of 5 kN.

■Load capacity: max. 5kN ■Stroke: 830mm ■Test speed: 0.0005 to 1000mm/min. *Options Data processing device [Model CON], compact printer [Model PS-A1], various types of wire tracking devices, etc. For other specifications, please refer to the catalog.

This is a tabletop universal testing machine with a maximum load capacity of 1 kN. The E3-L can accommodate specimens with large elongation.

■Load capacity: max. 1kN ■Effective stroke*: E3-L: about 830mm, E3-S: about 330mm (when using J-3 chuck) ■Test speed: 0.05 to 1500mm/min ■Options: Dedicated data processing device [Model CON], contact-type standard line tracking device [DE-C], various chucks (grippers), jigs, compact printer [Model PS-A1] ■Power supply: Single-phase, AC100V~115V, 50/60Hz, 3A or single-phase, AC200V~240V, 50/60Hz, 2A (choose one) ■Dimensions: W435 × D460 × H1400mm (E3-L), W435 × D460 × H900mm (E3-S) ■Weight: about 62kg (E3-L), about 47kg (E3-S) For other specifications, please refer to the catalog.

It is a specialized machine for conducting tensile and compression tests on various materials under temperature conditions. Compared to a standard universal testing machine equipped with a constant temperature chamber, it can secure a longer stroke.

【Model TF-50F】 ■Temperature range: -50°C to 200°C ■Load capacity: max. 10kN ■Crosshead stroke: 900mm ■Effective stroke: 600mm (when using fixed position wedge chuck C-2) ■Test speed: 0.0005 to 500mm/min. ■Options: - Various chucks (grippers) - Bending fixtures - Compression fixtures - Dedicated data processing software - Data processing device (PC with dedicated data processing software included) - Contact type standard line tracking device (standard line extensometer) - Non-contact (optical/laser) standard line tracking device - 4-channel (4-piece) specification and more For other specifications, please refer to the catalog.

It is a tensile testing machine equipped with a 4-point suspension and a constant temperature chamber (temperature range 40°C to 150°C).

■Number of hangers: 4 ■Temperature range: 40℃ to 150℃ ■Load capacity: 500N × 4 hangers (maximum 2kN) ■Crosshead stroke: 1100mm ■Effective stroke: approximately 800mm (when using O-ring chuck) ■Test speed: 0.5 to 500mm/min. For other specifications, please refer to the catalog.

If you set the test specimen on the tray, all processes from measuring the test specimen dimensions to chucking, measuring the elongation between reference lines, removing the test specimen, and data processing will be performed automatically.

■Applicable test specimens (selection): JIS K 7161-2 (ISO 527-2) dumbbell specimen type 1A, ASTM D638 Type I, Type IV ■Number of test specimens stored: 200 pieces ■Load capacity: 20 kN ■Effective stroke: approximately 700 mm ■Test speed: 0.0005 to 500 mm/min ■Gripper: air-operated ■Contact type extensometer: elastic modulus measurement fracture elongation measurement ■Test specimen measurement: thickness and width (3 points within the gauge length) ■Data processing device: standard included (PC, dedicated software) For other specifications, please refer to the catalog.

This is a testing machine that automatically conducts tensile tests on soft materials such as elastomers.

■Number of test specimens: 150 pieces ■Load capacity: max. 700N ■Effective stroke: approximately 850mm ■Test speed: 5 to 500mm/min ■Guideline tracking: approximately 500mm (effective stroke) ■Options: Non-contact (laser) guideline tracking device, 50-stage tray (maximum 300 pieces), thickness measurement sample holder ■Reference standards: JIS K6251, JIS K6272, ISO 37, ISO 5893 For other specifications, please refer to the catalog.

It is a testing machine that conducts tensile tests on plastic films automatically.

■Applicable test specimens: (Select) ・JIS Z 1702: Figure 1 (Dumbbell shape) ・ISO 527-3: Specimen type 2, type 1B (Dumbbell shape) ■Specimen storage method: Tray type ■Load capacity: max. 500N ■Effective stroke: Approximately 850mm ■Test speed: 0.5 to 500mm/min ■Chuck (gripping device): Air type (capacity 500N) ■Marking line tracking (marking line elongation gauge): Contact type ■Specimen measurement: Digital thickness gauge (measuring element ∅5mm, measurement points 3 points within the marking line) ■Data processing device: Standard included (PC, dedicated software) For other specifications, please refer to the catalog.

Fully automatic tensile testing machine for rubber (with constant temperature chamber)

■Load cell capacity: Maximum 1kN ■Tensile speed: 0.5 to 500 mm/min, 14 stages ■Effective stroke: Approximately 700 mm ■Standard line tracking device (extensometer): Non-contact type ■Test specimen supply section: Can accommodate a maximum of 120 test specimens ■Constant temperature chamber: -40 to 150℃ ■Dimensions: W2200 x D1560 x H2230 mm (main unit) W1000 x D1100 x H1530 mm (refrigeration unit) ■Reference standards: JIS K6251, JIS K6272, ISO 37, ISO 5893

It is a fully automatic tensile testing machine for rubber, equipped with a dedicated constant temperature chamber.

【Device Configuration】 Constant Temperature Bath, Specimen Storage (Dumbbell No. 3), Marking Section, Thickness Measurement Section, Transport Section, Measurement Section, Standard Line Tracking Section, Data Processing Device ■ Constant Temperature Bath: Room Temperature +20℃ to 100℃ ■ Maximum Load Capacity: 1kN ■ Effective Stroke: Approximately 700mm ■ Testing Speed: 0.5 to 500mm/min ■ Standard Line Tracking: CCD Camera Method ■ Specimen Supply Section: Holds up to 300 specimens ■ Data Processing Device: Standard Included (PC, Dedicated Data Processing Software) ■ Reference Standards: JIS K6251, JIS K6272, ISO 37, ISO 5893 For other specifications, please refer to the catalog.

This is a dedicated constant temperature chamber for the universal material testing machine (tensile and compression testing machine) "Strograph VG/VGS."

■VGF-50: -50 to +200℃ Cooling method: Two-stage compression refrigeration unit ■VGF-30: -30 to +200℃ Cooling method: Refrigeration unit ■VGSCO: -60 to +150℃ Cooling method: Liquid carbon dioxide ■VGCO: -60 to +250℃ Cooling method: Liquid carbon dioxide ■VGS200: Room temperature +30 to +150℃ Heater only ■VG300: Room temperature +30 to +300℃ Heater only Constant temperature bath 150mm extension ■VGF50H: -50 to +200℃ Cooling method: Two-stage compression refrigeration unit ■VGF30H: -30 to +200℃ Cooling method: Refrigeration unit ■VGCOH: -60 to +250℃ Cooling method: Liquid carbon dioxide ■VG200H: Room temperature +30 to +200℃ Heater only Constant temperature bath for S-type strograf ■SF-50: -50 to +200℃ Cooling method: Two-stage compression refrigeration unit ■SF50T: Constant temperature bath 150mm extension: 50 to +200℃ Cooling method: Two-stage compression refrigeration unit ■SF50N: When equipped with a non-contact standard line tracking device -50 to +200℃ Cooling method: Two-stage compression refrigeration unit ■SF50TN: When equipped with a non-contact standard line tracking device, constant temperature bath 150mm extension -50 to +200℃ Cooling method: Two-stage compression refrigeration unit

An air chuck for tensile testing with a maximum capacity of 10 kN, suitable for tensile tests of plastic specimens and similar materials.

■Maximum load: 10kN ■Gripping part dimensions: W40 x H40mm ■Opening: 8mm *Safety cover for air vise chuck (optional) available for 10kN and 20kN. Prevents finger pinching Can be retrofitted

High-precision gauge for measuring the elongation between standard lines from the tensile modulus of plastic test specimens to fracture elongation.

■Tracking range: Maximum 350mm (when using BD-10K chuck) ■Detection method: Small range ⇒ Non-contact linear encoder Large deformation ⇒ Encoder wire method ■Resolution: Small range 0.4μm, Large deformation 22.0μm ■Measurement accuracy: Small range ±1μm, Large deformation ±1% ■Standard line spacing: 50mm ■Power supply: Single phase, AC100V, 50/60Hz, 3A ■Compatible main body model: Strograf VG-F

Air chuck for tensile testing with a maximum capacity of 500N to 5kN, suitable for tensile tests of rubber specimens and similar materials.

[B-11] ■Maximum load: 5kN ■Gripping part dimensions: W40 x H30mm ■Opening: 10mm [B-12] ■Maximum load: 1kN ■Gripping part dimensions: W30 x H24mm ■Opening: 10mm [B-13] ■Maximum load: 500N ■Gripping part dimensions: W30 x H20mm ■Opening: 10mm *Various types of air vise chucks are available. (Models B-1~B-13, B-15~B-17, BD-10K, BD-20K) *Various safety covers are also available. Please note that for retrofitting, it is limited to bodies that have been processed with safety cover mounting holes on the chuck body. (Model B-6 is not compatible, so please be aware.)

This is a strain gauge-type wire elongation meter compatible with the measurement of the tensile elastic modulus of plastics.

■Detection method: Strain gauge method ■Gage length: 50, 75 mm ■Displacement range: Range-less (equivalent to x1 to x20) ■Zero correction: One-touch auto-zero method ■Full calibration: One-touch calibration using a checker box

A tensile testing chuck (gripping device) with a maximum capacity of 1kN to 20kN, suitable for tensile tests of materials such as plastic.

[C-0] ■Maximum load: 50kN ■Gripping part dimensions: W40 x H42mm ■Opening: 6.5mm [C-1] ■Maximum load: 20kN ■Gripping part dimensions: W32 x H45mm ■Opening: 7.5mm [C-2] ■Maximum load: 10kN ■Gripping part dimensions: W26 x H35mm ■Opening: 7.5mm [C-3] ■Maximum load: 5kN ■Gripping part dimensions: W26 x H30mm ■Opening: 7.5mm [C-4] ■Maximum load: 1kN ■Gripping part dimensions: W26 x H30mm ■Opening: 7.5mm

It is a standard type contact wire extension gauge.

For more details, please download the PDF or contact us.

Grip device for tensile testing of threads and cords (air-tightening type)

Model: N-6 Maximum Load: 5kN Opening: 3mm Air Source: 0.5MPa

It is a non-contact wire elongation gauge that uses a CCD camera system.

For more details, please download the PDF or contact us.

A tensile testing chuck (gripping device) with a maximum capacity of 500N to 3kN, suitable for tensile tests of rubber and other dumbbell-shaped specimens.

[H-1] ■Maximum load: 3kN ■Gripping part dimensions: W35mm x Roll diameter 8mm ■Opening: 4mm ■Roll surface: Lot [H-2] ■Maximum load: 500N ■Gripping part dimensions: W35mm x Roll diameter 8mm ■Opening: 4mm ■Roll surface: Lot [H-3] ■Maximum load: 3kN ■Gripping part dimensions: W35mm x Roll diameter 8mm ■Opening: 4mm ■Roll surface: Knurled [H-4] ■Maximum load: 500N ■Gripping part dimensions: W35mm x Roll diameter 8mm ■Opening: 4mm ■Roll surface: Knurled

A tensile testing chuck (gripping device) with a maximum capacity of 1kN to 3kN, suitable for tensile tests of dumbbell-shaped specimens made of rubber and similar materials.

[I-1] ■Maximum load: 3kN ■Gripping part dimensions: W26mm ■Opening: 6mm ■Roll surface: Knurled [I-2] ■Maximum load: 1kN ■Gripping part dimensions: W26mm ■Opening: 6mm ■Roll surface: Knurled

A tensile testing chuck (gripper) with a maximum capacity of 100N to 5kN, suitable for tensile tests of paper, plastic films, and the like.

[J-1] ■Maximum load: 5kN ■Gripping part dimensions: W50 x H30mm ■Opening: 6mm [J-2] ■Maximum load: 500N ■Gripping part dimensions: W50 x H30mm ■Opening: 6mm [J-3] ■Maximum load: 100N ■Gripping part dimensions: W50 x H20mm ■Opening: 6mm