東洋精機製作所 Official site

This is a digital display and semi-automatic operation Mühlen burst testing machine.

■Test specimen clamping method: Automatic clamping using compressed air ■Measurement range: 【M2-HD】max. 7000kPa 【M2-LD】max. 2000kPa ■Pressurizing liquid: Glycerin (special grade) ■Safety devices: Finger pinch prevention device, glycerin splash prevention device, overload prevention device, automatic return device for dry operation ■Options: Compact printer, data processing software ■Reference standards: 【M2-HD】JIS P 8131, ISO 2759 【M2-LD】JIS P 8112, JIS L 1096, ISO 2758 For other specifications, please refer to the catalog.

It is an analog type Mullen burst testing machine (Mullen type burst strength testing machine).

■ With a 3-position switch, both standard burst tests and cross-mode tests (fabric tests) can be performed. ■ Digital and analog pressure gauges can be selected. ■ It is an energy-saving type where the motor operates only during pressure increase and decrease. ■ It is safe as the cylinder is equipped with forward limit sensors and backward limit sensors.

This is a tabletop universal testing machine with a maximum load capacity of 1 kN. The E3-L can accommodate specimens with large elongation.

■Load capacity: max. 1kN ■Effective stroke*: E3-L: about 830mm, E3-S: about 330mm (when using J-3 chuck) ■Test speed: 0.05 to 1500mm/min ■Options: Dedicated data processing device [Model CON], contact-type standard line tracking device [DE-C], various chucks (grippers), jigs, compact printer [Model PS-A1] ■Power supply: Single-phase, AC100V~115V, 50/60Hz, 3A or single-phase, AC200V~240V, 50/60Hz, 2A (choose one) ■Dimensions: W435 × D460 × H1400mm (E3-L), W435 × D460 × H900mm (E3-S) ■Weight: about 62kg (E3-L), about 47kg (E3-S) For other specifications, please refer to the catalog.

It is a universal material testing machine with a maximum load capacity of 20 kN.

■Maximum load capacity: 20kN ■Test speed: 0.0005 to 1000 mm/min. (Note: Model VG20F is up to 500 mm/min.) ■Stroke: 1100 mm *Options Data processing software [Model WD], various constant temperature baths, optional crosshead for constant temperature baths [Model OC], dedicated stand (for VG) [Model BED-VG], small printer [Model PS-A1], splash prevention cover (for Strolograph VG), and others. For other specifications, please refer to the catalog.

This is a testing machine that automatically conducts tensile tests on soft materials such as elastomers.

■Number of test specimens: 150 pieces ■Load capacity: max. 700N ■Effective stroke: approximately 850mm ■Test speed: 5 to 500mm/min ■Guideline tracking: approximately 500mm (effective stroke) ■Options: Non-contact (laser) guideline tracking device, 50-stage tray (maximum 300 pieces), thickness measurement sample holder ■Reference standards: JIS K6251, JIS K6272, ISO 37, ISO 5893 For other specifications, please refer to the catalog.

This is a device for measuring the rebound resilience of rubber in accordance with JIS K 6255.

■Hammer: ∅12.5mm ■Measurement method: No-load encoder (minimum angle 0.1°) ■Test specimen: ∅29mm, thickness 12.5mm ■Reference standards: ISO 4662:2017 JIS K 6255:2013

This is a portable adhesive testing machine that measures the adhesive properties (tack value) of non-sulfurized rubber, adhesive tapes, and the like. It allows for easy measurement of the adhesive strength of materials on-site.

■ It is compact, lightweight, and easy to carry (approximately 1.3kg). ■ Thickness measurements can be taken on-site. ■ Measurements can be easily taken by simply pressing the device against the measurement material (automatic start). ■ The ratchet mechanism rotates the contact pin with each measurement. ■ The cleaning mode allows for easy cleaning of the contact pin. ■ It is possible to measure the surface temperature of the measurement material, which affects adhesive strength (optional).

This is a testing machine for measuring the viscosity of unvulcanized rubber and the scorch time of the rubber.

■Die shape: V-shaped groove die (Option: square groove die) ■Test temperature: Room temperature +20°C to 200°C ■Rotational speed: 2 rpm ■Mooney viscosity: 0 to 200 M ■Scorch time: 0 to 99.9 M (2 points) ■Options: Dedicated data processing device [Model CON-L], rotor preheating tank [Model M-RPH], stress relaxation measurement [M-SR2], small printer [Model PS-BS1], etc. ■Reference standards: JIS K 6300-1, ISO 289-1 to 4, ASTM D1646 For other specifications, please refer to the catalog.

This is a device for pressing adhesive tape against a test plate during the adhesive strength test of adhesive tape, based on JIS Z 0237.

■Roller mass: 2,000g ■Roller travel distance: 165mm ■Roller travel speed: 10±0.5mm/sec ■Options (not included in standard specifications) 　Manual roll jig (a jig for using the roll as a manual crimping device) 　Safety cover with interlock (drive operates only when the cover is closed) ■Reference standard: JIS Z 0237 (2009)

This is a vulcanization testing machine (rotorless rheometer/MDR) for evaluating the vulcanization characteristics of rubber. Fully automated testing is also possible with the optional sample automatic loading and unloading device.

■Die shape: Rotor-less type non-friction sealed type Flat die (standard) Conical die (optional) ■Amplitude angle: ±0.10° to ±2.00° (variable in 0.01° increments) ■Frequency: 0.83 to 2.5Hz (50 to 150cpm) ■Temperature range: Room temperature +20°C to 230°C ■Torque range: 100 dN·m auto range (maximum 200 dN·m) ■Sample loading/unloading: Manual (standard) Fully automatic (optional) ■Options: Automatic sample loading/unloading device (pin type, film type), data processing device (PC, dedicated software included), foam pressure measurement device, programmed heating device, phase angle measurement device, viscoelasticity measurement device, etc. ■Reference standards: JIS K 6296-1, -3, JIS K 6297 (ISO 13145) (for viscoelasticity measurement option), ISO 6502-1, -3, ASTM D5289 For other specifications, please refer to the catalog.

This is a disperser (paint shaker, paint conditioner, shaker) used for evaluating the dispersibility of pigments used in paints and inks.

■Container Capacity: 　Choose one of the following 　　500ml × 2 bottles 　　100ml × 4 bottles 　　200ml × 4 bottles 　　300ml × 3 bottles ■Vibration Speed: Choose either 750 times/min or 800 times/min ■Power Supply: AC100V, single phase, 50 or 60Hz, 10A ■Dimensions: W700 × D800 × H1270mm ■Weight: 100kg (including the frame) ■Safety Cover: Please choose one of the safety covers 　　　　　　　Standard Safety Cover 　　　　　　　Safety Cover with Limit Switch 　　　　　　　Side Opening Cover ■Options: Glass beads (3mm diameter) (1kg per bag), 　　　　　　　Rear Safety Cover 　　　　　　　Down Transformer

In the most common wear test for flat materials, the wear of the contact surface with two wear wheels is evaluated by the reduction in mass, thickness, and gloss.

■Rotation speed: 60, 70, 72 rpm ■Load: 2.45N (250gf), 4.9N (500gf), 9.8N (1000gf) ■Counter: 6-digit digital counter ■Holder: One E100-125 type included *The rephaser on the right side of the photo is optional. *Optional sample holders Ring clamp sample holder Model E-14 (E140-14 type) NEMA type holder Model E-21 (E140-21 type) Drive pin type holder Model E-19 (E140-19 type) Reference standards: JIS A1453, K5600, K6264, K7204, K6404-4, L1096 ISO9352

This is a testing machine for evaluating the tackiness (tack value) of ink and misting.

■Drive Motor: AC Servo Motor 400W ■Roll Diameter: Metal Roll Φ76.2mm Top Roll Φ79.3mm Vibration Roll Φ50.8mm ■Metal Roll Rotation Speed: 400, 800, 1200 rpm and optionally, 100–3000 rpm (multi-program required separately) ■Tack Measurement Range: 0–40 ■Measurement Temperature Range: Room Temperature +5℃ to 40℃ (external constant temperature circulation tank required separately) ■Detection Method: Differential Transformer Type ■Operation Panel: Touch Panel LCD Display ■Data Display: Tack Value, History of Last 5 Tack Values, Rotation Speed, Interval Time, Temperature, Sample Name, Operator Name, etc. ■Data Output: Various options, Compact Printer [Model PS-A1] or PC ■Safety Measures: Emergency Stop Switch, Acrylic Cover *Options: Common Import Software [Model EX-2], Constant Temperature Circulation Tank [Model CC1], Emulsification Device [Model C1-E], Safety Cover Switch [Model D-2IL], Multi-Program, Flow Monitor, etc. For other specifications, please refer to the catalog.

If you set the test specimen in the cassette, all processes from measuring the test specimen to chucking, bending measurement, removing the test specimen, and data processing will be performed automatically.

■Applicable test specimens (selection): JIS K 7171 (ISO 178), ASTM D790 ■Number of test specimens stored: 140 pieces (for thickness of 4mm) ■Load capacity: max. 2kN ■Effective stroke: approximately 30mm ■Dimensions: W900 × D500 × H1600mm (main body) ■Weight: approximately 200kg For other specifications, please refer to the catalog. <Reference standards> JIS K 7171 (Method for determining the bending properties of plastics) ISO 178 (Plastics-Determination of flexural properties) ASTM D790 (Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic and Electrical Insulating Materials)

This is a compact tabletop test press machine for laboratory use. It can be used for pressing plastic sheets for compression molding and for vulcanizing rubber sheets, among other applications.

■Heating plate dimensions: 200 x 200mm or 250 x 250mm ■Maximum output: 100kN (30MPa) ■Stroke: Maximum 100mm (75mm for models with water cooling plate, 90mm for water cooling only type) ■Temperature control range: Room temperature +10 to 300℃ or 400℃ ■Safety devices: Overheat prevention circuit, leakage, overcurrent breaker <Models> MP-SNL: 200x200mm, no water cooling plate, maximum temperature 300℃ MP-SCL: 200x200mm, with water cooling plate, maximum temperature 300℃ MP-SNH: 200x200mm, no water cooling plate, maximum temperature 400℃ MP-SCH: 200x200mm, with water cooling plate, maximum temperature 400℃ MP-SC: 200x200mm, water cooling only MP-WNL: 250x250mm, no water cooling plate, maximum temperature 300℃ MP-WCL: 250x250mm, with water cooling plate, maximum temperature 300℃ MP-WNH: 250x250mm, no water cooling plate, maximum temperature 400℃ MP-WCH: 250x250mm, with water cooling plate, maximum temperature 400℃ MP-WC: 250x250mm, water cooling only ●For more details, please contact us or refer to the catalog.

This is a testing machine for measuring the MFR and MVR of thermoplastic resins (MI meter, MFR tester, melt flow rate tester, melt flow tester).

■Test temperature: max. 350℃ (400℃: optional) ■Test load: 0.325 to 21.6 kg ■Options: Flow rate device for Method B [Model FRG1], cutting device (automatic [Models ACG2, ACSG2 (with sliding mechanism)]; manual [Models MCG2-A, -B]), weight lifting device [Model WLG1], die plug, data output software [Model RTD1], safety cover [Model SCG1], corrosion-resistant specification, compact printer [Model PS-A1], etc. ■Power supply: Single-phase, AC100–115V 6A, AC200~230V 3A, 50/60Hz ■Dimensions: W400 x D370 x H560 mm ■Weight: Approximately 40 kg For other specifications, please refer to the catalog. <Reference Standards> JIS K 7210-1 (Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard test method) ISO 1133-1 ASTM D1238

This is a melt indexer capable of multi-weight measurement as specified by ASTM D1238 Method D, in addition to standard single weight measurement.

■Temperature range: 100 to 350℃ (high temperature specification 400℃) ■Temperature display resolution: 0.1℃ (can be switched to 0.01℃ depending on environmental settings) ■Temperature accuracy: ±0.2℃ ■Test load: 0.325kg to 21.6kg ■Reference standards: JIS K 7210, ISO 1133, ASTM D1238, etc. ■Power supply: Single phase, AC100 to 115V or AC200 to 230V, 50/60Hz ■Body dimensions: W700 x D730 x H1400mm

It is a testing machine that applies bending actions to materials such as paper, plastic film, metal foil, and flexible printed circuit boards (FPC) to evaluate their foldability.

[S-2] ■Load method: Spring load ■Load: 1.0–5.0N or 5.0–15.0N (selectable) ■Bending angle: 45°, 90°, 135° to the left and right ■Bending speed: 90cpm, 175cpm ■Reference standards: JIS P8115, R3420, C5016, C6471, ASTM D2176, TAPPI T511, ISO 5626 [D-2] ■Load method: Dead weight load ■Load: 2.45–19.6N (2.45N step) or 0.98–9.8N (0.49N step) (selectable) ■Bending angle: 45°, 90°, 135° to the left and right ■Bending speed: 90cpm, 175cpm ■Reference standards: JIS C5016, C6471 ■Options: Resistance fracture test, continuity test, data processing device, common import software, resistance fracture data import software

This is a testing machine that applies impact to a plastic specimen and determines the impact value from the energy of the pendulum required for destruction.

■Reference Standards: Charpy Impact Test: JIS K 7111-1, ISO 179-1, 179-2, ASTM D6110 Izod Impact Test: JIS K 7110, ISO 180, ASTM D256 Tensile Impact Test: JIS K 7160, ISO 8256, ASTM D1822 Other Impact Peel Test ■Hammer Measurement Range: 0.5 to 25J ■Display Language: Japanese and English (switchable) ■Options: Compact Printer [PS-B1], Hammer Release Device [Model H-REL], Instrumentation System, Data Processing Device [Model CON], Hammer Brake [Model ITBK], Safety Cover [Model ITSC], Charpy Test Specimen Positioning Support [Model ACBAST] (allows precise specimen setup by placing the tip needle on the notch area), etc.

This is a testing machine that measures the static friction coefficient (μS) and dynamic friction coefficient (μK) of materials such as plastic films, paper, textiles, and leather products using the horizontal method.

■Measurement item: Horizontal method ■Measurement item: Static friction coefficient (μS), dynamic friction coefficient (μK) ■Table (selection): Glass plate (W330 × D225, t=5) or SUS plate (W330 × D225, t=5) ■Movement distance: 1 to 200mm ■Test speed: 5 to 1500mm/min ■Load capacity (selection): 10N, 20N, 50N ■Thread (selection): 63×63mm, 200g (for plastic film/sheet), 60×100mm, 1000g (for paper/cardboard) ■Options: Movement speed specification 5 to 2000mm/min, dedicated data processing software, compact printer, safety cover, magnet holder specification ■Reference standards: JIS K 7125, JIS P 8147, ISO 8295 For other specifications, please refer to the catalog.

It is a testing machine (friction coefficient measuring device) that measures the static friction coefficient (μS) of materials such as plastic films, paper, and textile products using the inclined plane method.

■Measurement Method: Inclination Method ■Measurement Item: Static Friction Coefficient (μS) ■Inclination Angle: 0 to 60.0° ■Inclination Speed: 1.5°/s ■Return Speed: 1.5°/s ■Thread (Weight): 60×100mm, 1000g ■Options: Common Import Software, Small Printer ■Reference Standard: JIS P 8147 For other specifications, please refer to the catalog.

It is a testing machine that evaluates the stiffness of extremely thin materials such as films by measuring the resistance to collapse in a loop shape.

■Sample dimensions: Length 90–180mm, Width 6–25.4mm, Thickness 100–250μm ■Load range: 5000mN(x1), 500mN(x10), 50mN(x100) ■Compression speed: 3.3mm/s ■Power supply: Single phase, AC100V, 50/60Hz, 3A ■Dimensions: W360 x D490 x H310mm ■Weight: 25kg ■Options: Load cells (200, 500, 1000, 2000mN), Variable compression speed unit (2, 3.3, 5mm/s), Data processing device, Magnetic chuck (for sample thickness 10–100μm)

This is a testing machine for measuring the melt viscosity of polymer materials when subjected to shear flow in a molten state. Measurement of die swell and melt tension is also available as an option.

■Number of cylinder bodies: Single (Model F-1) or Twin (Model F-2) ■Cylinder body diameter: F-1: Ø9.55mm or Ø15mm, F-2: Ø15mm ■Load capacity: F-1: 25kN (Ø9.55) or 50kN (Ø15mm), F-2: 25kN ■Extrusion speed: 0.1 to 1500mm/min. ■Capillary die lineup: Length 0.2 to 50.8mm, diameter 0.5 to 2.095mm, with inflow angle or flat (180°) ■Test temperature: max. 400℃ ■Data processing device: Standard included (PC, dedicated software) ■Options: Die swell measurement, melt tension measurement, pipe length correction and Rabinovich correction processing software, automatic input software, elongational viscosity calculation processing software For other specifications, please refer to the catalog. <Reference Standards> JIS K 7199 (Test method for flow characteristics of plastics using capillary rheometers and slit die rheometers) ISO 11443

This is a notch processing machine that automatically performs notch cutting on Charpy impact test specimens and Izod impact test specimens. It enables high-precision notch processing with minimal burrs.

■Notching method: Single blade, milling method (automatic operation except for loading and unloading of test pieces) ■Processing details: 【Model A-4】: Notch cutting and both ends slice cut 【Model A-4E】: Notch cutting only ■Test piece clamping capacity: Opening width: 100mm (equivalent to 4mm x 25 pieces) ■Feed speed: 50–1200mm/min. ■Cutter rotation speed 【Model A-4】: 200–900rpm (AC servo motor) 【Model A-4E】: 50Hz: 300rpm, 60Hz: 360rpm (synchronous motor) ■Safety devices: Temporary stop when safety cover is opened, emergency stop switch, leakage breaker

This is a testing machine for identifying the blow point of rubber materials. By understanding the minimum required vulcanization time for rubber, it contributes to improving product quality and productivity.

■Mold: 10mm type (L140 x W55 x t6～10mm taper) 20mm type (L140 x W55 x t6～20mm taper) 30mm type (L140 x W55 x t6～30mm taper) ■Temperature range: Room temperature +30 to 200℃ ■Options: Manual cutting machine for 10mm thickness [Model: CUT] Sample cutter (air-operated) [Model: BP-CUT]

This is a testing machine for understanding the processing characteristics of polymer materials such as thermoplastic resins, thermosetting resins, and elastomers.

■Maximum Torque: 3S150, 3S500: 300N·m 10S100: 1000N·m ■Rotational Speed: 3S150: 0.1–150rpm 10S100: 0.1–100rpm 3S500: 0.1–500rpm ■Data Processing Unit: Standard included (PC, software, PC rack) Option: Compact printer [Model PRT-1]

Tabletop mixing and extrusion molding evaluation test device. It allows for processability evaluation with a very small amount of samples using a super compact mixer and extruder.

■Rotation speed: 0 to 100 rpm, load fluctuation rate ±0.1% ■Torque measurement range: Max 40 N·m (current conversion formula) ■Temperature measurement range: 0 to 400℃ ■Data display: Data curves displayed on an LCD touch panel ■Safety devices: Torque and temperature limiters, emergency stop switch, mixer disassembly safety circuit ■Options: Data processing device (PC, software) Data processing software

A simple manual injection molding machine for producing test specimens. It can also be used as a pelletizer to pelletize amorphous samples mixed in a mixer.

【Mulder Specifications】 ■ Furnace Temperature: Room Temperature +20℃ to 400℃ ■ Cylinder: ∅10×130Lmm (Interchangeable inner cylinder) ■ Sample Capacity: Maximum 8cc ■ Injection Operation: Manual operation (Lever up and down operation) ■ Mold: Dumbbell shape, strip shape, etc. 【Pelletizer Specifications】 ■ Furnace Temperature: Room Temperature +20℃ to 400℃ ■ Cylinder: ∅20×130Lmm (Interchangeable inner cylinder) ■ Sample Capacity: Maximum 40cc ■ Pellet Length: Fixed at 3mm

It is a device for measuring the thermal conductivity until the plastic material changes from a molten state to a solid state through natural heat dissipation.

■Measuring Cylinder: Cylinder diameter ∅12.5mm Electric heater heating 400W ■Probe: Probe diameter ∅1.2mm Probe length 50mm Temperature sensor: Pt100, resolution 0.01℃ Heater output: voltage 0–16V, current 0–400mA, maximum output 5W Accuracy 0.1% (at laboratory temperature 25℃) ■Pressurization method: ∅63mm air cylinder type (max. 2800N) ■Measuring temperature range: max. 350℃ ■Measurable range: 0–1.5W/m·k ■Cleaning drive: air cylinder type (max. 2800N) ■Sample supply method: manual supply ■Data processing: PC For other specifications, please refer to the catalog.

It is a testing machine for evaluating the bending resilience of materials such as textiles, paper, and films.

For other features and characteristics, please refer to the catalog or contact us.

Related standards: ISO 9237 (JIS L 1096), ASTM D 737

-Measuring range: 0.5 to 500cm³/cm²·s 0.05 to 50 cm³/(cm²·s) (optional) -Measuring area: 5cm² 100cm² (optional) -Setting pressure range: 50 to 500Pa -Power supply: Single-phase, AC100V, 50/60Hz, 0.5kVA (or specify) -Dimensions: W260 x D360 x H280mm -Weight (approx.): 55kg

It is a testing machine that measures the heat release rate and heat release amount during the combustion of materials, used for performance evaluation of fire-resistant materials based on the Building Standards Act.

■ISO 5660-1, ASTM E1354, JIS A1316, New Fireproof Material Certification Test Method (Building Standards Act) ■Combustion Chamber: Simple Sealed Type ■Heat Source: Cone Type Seed Heater ■Radiometer: 100kW/m2, with Computer ■Options: CO/CO2 Gas Analyzer [Model CO-002], Fire Extinguishing Device [Model EF], Soot Collection Device [Model SO], Vertical Test [Model VT], etc.

It is a device for measuring the gas permeability (gas barrier properties) of materials such as plastic films and rubber sheets using the differential pressure method.

■Number of test specimens: 1 or 3 ■Measurement range: Room temperature type (model CR) or temperature-controlled type (10~90°C, hot water circulation type, model CT) ■Test specimen dimensions: ・50×50mm (measurement area ∅30mm, transmission area 707mm²) ・90×90mm (measurement area ∅70mm, transmission area 3848mm²) ■Gas permeability measurement range (selectable) ・Type A: 4.5×10-15 to 4.5×10-12 [mol/(m²·s·Pa)] (0.1 to 100 [fm/(Pa·s)]) ・Type B: 4.5×10-14 to 4.5×10-11 [mol/(m²·s·Pa)] (1 to 1000 [fm/(Pa·s)]) ■Test gases: Oxygen, nitrogen, carbon dioxide, air, hydrogen* (*optional), etc. ■Test gas pressure: 0~200kPa ■Measurement items: Gas permeability, gas permeability coefficient (diffusion coefficient and solubility coefficient optional) ■Data processing and control: PC (with dedicated software) ■Air source: 0.4MPa (used during diffusion coefficient measurement) ■Options: ・Additional expansion module ・Diffusion coefficient measurement device ・Hydrogen gas measurement unit