東洋精機製作所 Official site

This is a testing machine for understanding the processing characteristics of polymer materials such as thermoplastic resins, thermosetting resins, and elastomers.

■Maximum Torque: 3S150, 3S500: 300N·m 10S100: 1000N·m ■Rotational Speed: 3S150: 0.1–150rpm 10S100: 0.1–100rpm 3S500: 0.1–500rpm ■Data Processing Unit: Standard included (PC, software, PC rack) Option: Compact printer [Model PRT-1]

Tabletop mixing and extrusion molding evaluation test device. It allows for processability evaluation with a very small amount of samples using a super compact mixer and extruder.

■Rotation speed: 0 to 100 rpm, load fluctuation rate ±0.1% ■Torque measurement range: Max 40 N·m (current conversion formula) ■Temperature measurement range: 0 to 400℃ ■Data display: Data curves displayed on an LCD touch panel ■Safety devices: Torque and temperature limiters, emergency stop switch, mixer disassembly safety circuit ■Options: Data processing device (PC, software) Data processing software

Mixer (roller type) for the lab plastomill used in blending and extrusion molding evaluation testing equipment.

■Chamber capacity: 60㎤ ■Blade shape: Roller type ■Blade rotation ratio: 2 to 3 (L:R) ■Temperature: 250℃ Electric heating type (R60H with 400℃ specification is also available) ■Maximum allowable torque: 200N·m *Block No.2 comes with dedicated grips on both sides ■Options: Wear-resistant mixer blades, corrosion-resistant specifications, high-temperature and corrosion-resistant specifications, water-cooled specifications, air cooling devices, etc. For other specifications, please refer to the catalog.

Mixer accessory (optional) for the blending and extrusion molding evaluation test device Laboplast Mill.

●

Mixer (roller type) for the lab plastomill used in blending and extrusion molding evaluation testing equipment.

■Chamber capacity: 500cc ■Blade shape: Roller type ■Temperature: 250℃ electric heating type (high temperature type at 400℃ also available) Please refer to the catalog for other specifications.

Mixer (planetary type) for the blending and extrusion molding evaluation test device Laboplast Mill.

■Chamber capacity: 600cc ■Blade shape: Beatus type ■Temperature: 150℃ electric heating type (high temperature type at 400℃ is also available) ■Reference standards: ISO 4612, JIS K7384 For other specifications, please refer to the catalog. *The photo shows the optional dedicated stand for model KPMIX2 (200V only) and KPMIX1 (100V and 200V compatible model).

Mixer (Banbury type) for the evaluation testing device of mixing and extrusion molding for Laboplast Mill.

○Chamber capacity: 600cc ○Blade shape: Banbury type ○Blade rotation ratio: 7:8 (L:R) ○Temperature: +50℃ to +180℃ oil heating type ○Optional mixer-specific stand, oil circulation tank, and air source are required separately. ●For more details, please contact us or refer to the catalog.

Tabletop mixing and extrusion molding evaluation test device, Laboplast Mill, mixer for micro use. It allows for mixing evaluation tests with a small amount (4-5 cm³) of sample.

● Mixing method: Gear-type same-direction rotation ● Blade shape: 2-lobe disc, 5-piece combination ● Mixer capacity: Approximately 5cc ● Rotational speed: 3 times speed (basic device rotation speed × 3 = max. 300rpm) ● Temperature range: Room temperature +10°C to 350°C, compressed air cooling (water cooling possible below 100°C) ● Heating classification: 3 sections, cartridge heater, with resin temperature detection sensor ● Options Visualization block Nitrogen purge and simple vacuum (Max 250°C) possible ● Power supply: Single-phase, AC100V, 50/60Hz, 15A (distributed from the Laboplast Mill Micro main unit)

Two-axis extruder (parallel type) for mixing and extrusion molding evaluation test equipment for Laboplast Mill.

For more details, please contact us or refer to the catalog.

Two-axis extruder (parallel type) for mixing and extrusion molding evaluation test equipment for Laboplast Mill.

■L/D: 25 ■Heating temperature: 350℃ (electric heating) ■Heat zone: 3 ■Cooling: air cooling ■Maximum allowable torque: 100N·m For other specifications, please refer to the catalog.

This is a twin-screw extruder for the "Laboplast Mill," a mixing and extrusion molding evaluation testing device that employs a segmented screw design.

■L/D: 30 ■Heating temperature: 350℃ (electric heating) ■Maximum allowable torque: 300N·m ■Heat zone: 5 zones ■Cylinder: Pressure (temperature) detection holes 5 locations Inner diameter ∅25mm with air cooling function Vent holes 2 locations (1 set of vent ports included) ■Screw: Segment type, same direction (double speed rotation) ■Volumetric feeder (F3R type): Variable speed motor (separate power supply) ■Included die: Strand die ∅3mm x 3 strands For other specifications, please refer to the catalog. *The photo includes an optional dedicated stand.

Tabletop mixing and extrusion testing device, Laboplast Mill, extruder for micro applications. Despite its small size with a diameter of 15mm, it is a geared co-rotating twin-screw extruder, allowing for powerful mixing.

■Rotation direction: Same direction (3 times speed rotation) ■Screw: Segment type L/D=17 ■Volumetric feeder (F3R type): Variable speed motor (separate power supply) ■Included die: Strand die ∅2.5mm x 1 piece Temperature detector model MTS included ■Temperature: max. 350℃ ■Maximum allowable torque: 40N·m For other specifications, please refer to the catalog.

Film and sheet take-up device for the mixing and extrusion molding evaluation test apparatus Laboplast Mill.

-

Small film take-up machine for tabletop mixing and extrusion molding evaluation test device Laboplast Mill for micro use.

■Cooling roll: ∅80 x 80mm with rotary joint ■Take-up speed: 0.3 to 5m/min ■Air knife: Equipped

Inflation take-up device for the lab plastomill used in mixing and extrusion molding evaluation testing.

For more details, please contact us or refer to the catalog.

Tabletop mixing and extrusion molding evaluation test device Laboplast Mill - small pelletizer for micro use.

■Pellet length: Fixed at 3mm ■Withdrawal speed: 2 to 8m/min ■Cooling tank: Made of SUS (stainless steel)