Yamamoto Binita Co., Ltd. will be exhibiting at "Messe Nagoya 2026" held at Port Messe Nagoya. We will also demonstrate the compact transistor-type high-frequency welding machine "YRP-400T-RC" that can be used with a 100V household power supply! 【Features of the High-Frequency Welder EXAST-V】 It has a proven track record in automotive interior materials, film lamination, industrial sheets, medical materials, and industrial resin processing! ■ Improved workability with a rotary roll shutter and upper electrode sliding mechanism ■ Safety and reduced burden with a photoelectric start switch ■ Highly expandable and flexible for various processing needs Our company proposes a "clean" heat source utilizing high-frequency dielectric heating in the heating process. We also plan to hold a demonstration at the exhibition. We sincerely look forward to your visit.

Yamamoto Binita Co., Ltd. will be exhibiting at the "Monozukuri Fair 2026" held at Marine Messe Fukuoka. We plan to showcase the following three models: Plastic Welding Machine PLASEST-05E, PLASEST-7SD Wood Heating Adhesive Machine TECNOGAN/TECNOIRONN type <PLASEST-05E> - Easy condition setting due to fabric condition settings - Improved and stabilized processing quality with thickness control using an electric cylinder - Operable with only a 200V power supply, no compressor needed. <PLASEST-7SD> - Suitable for mass production processing with dual-sided use! - Space-saving design with slide plates arranged front and back! <TECNOGAN/TECNOIRONN> - Usable with a household power supply of 100V - The tip iron part and gun can be exchanged with one touch * For edge bonding, fastening bonding, corner bonding, and bonding of wood, paper, and cardboard Our company proposes a "clean" heat source utilizing radio waves through high-frequency dielectric heating in the heating process. We also plan to conduct live demonstrations. We sincerely look forward to your visit.

Yamamoto Vinita will be exhibiting at the "36th Western Japan Food Industry Creation Exhibition '26" held at Tokyo Big Sight. Booth Number: West 4 Hall, Booth No. W4-39-05 *Exhibited Equipment: High-Frequency Rapid Thawing Device TEMPERTRON-VI Type - Thawing of beef, pork, chicken, vegetables, seafood, etc. - Heating and melting of dairy products such as butter, margarine, and chocolate - Achieves automation and labor-saving through rapid thawing. - This device can effectively heat even thick raw materials to the center. On the day of the event, we will also have a consultation desk for specific inquiries regarding thawing, heating, drying, and sterilization using radio waves (high frequency and microwaves). [Reasons for Improvement with High-Frequency Thawing] - Automation and line integration from raw material thawing to product completion on the day. - Thawing and heating in a short time frame of 20 to 30 minutes. - Reduction of personnel through automation of thawing and continuous thawing processes. - Ensuring thorough thawing of the center (uniform thawing quality) (elimination of surface drip loss). - Thawing without using water (reduction of water usage) (improvement of hygiene) (improvement of labor environment). - Elimination of excessive thawing (eradication of refreezing: reduction of food waste: thawing the necessary amount at the necessary time). Various companies have achieved improvements in their issues.

★★ We have received the "Kinki Bureau of Economy, Trade and Industry Director's Award" at the Monozukuri Japan Grand Prize! ★★ The "Monozukuri Japan Grand Prize" is a system that recognizes individuals from various generations who are particularly outstanding in the field of manufacturing, which has steadily inherited and significantly contributed to the development of Japan's industry and culture, and the formation of a prosperous national life, while flexibly responding to changes in the new business environment to further develop. This award was given in recognition of our initiative, "The Development of the High-Frequency Rapid Thawing Device, a Key Component of the Cold Chain Revolution." Seven members from our company were honored as award recipients. For an overview of the Kinki Block Excellence Award and Director's Award, please see here: https://www.kansai.meti.go.jp/3-5sangyo/monozukuri/10th/20260305_press/20260305-2_kansai-block_gaiyou.pdf For more details on the Monozukuri Japan Grand Prize, please visit the following: https://www.kansai.meti.go.jp/3-5sangyo/monozukuri/index2.html We will continue to strive for excellence.

Yamamoto Vinitar will be exhibiting at 'FOOMA JAPAN 2026' held at Tokyo Big Sight. Booth Number: West Hall 4, Booth No. W4-39-05 *Exhibited Equipment: High-Frequency Rapid Thawing Device TEMPERTRON-VI Type* - Thawing of beef, pork, chicken, vegetables, seafood, etc. - Heating and melting of dairy products such as butter, margarine, and chocolate. - Achieves automation and labor-saving through rapid thawing. - The device is also used for thick materials, ensuring thorough heating to the center. On the day of the event, we will also have a consultation desk for specific inquiries regarding thawing, heating, drying, and sterilization using radio waves (high frequency and microwaves). 【Reasons for Improvement with High-Frequency Thawing】 - Automation and line integration from raw material thawing to product. - Thawing and heating in a short time of 20 to 30 minutes. - Reduction of personnel through automation of thawing and continuous thawing processing. - Ensuring thorough thawing of the center (uniform thawing quality) (elimination of surface drip loss). - Thawing without using water (reduction of water usage) (improvement of hygiene) (improvement of labor environment). - Resolution of excessive thawing (elimination of refreezing: reduction of food loss: thawing the necessary amount at the necessary time). Companies are achieving improvements in their issues.

Yamamoto Vinitar will be exhibiting at 'FOOMA JAPAN 2026' held at Tokyo Big Sight. Booth number: West Hall 4, Booth No. W4-39-05 *Exhibited machine: High-frequency rapid thawing device TEMPERTRON-VI type* - Thawing of beef, pork, chicken, vegetables, seafood, etc. - Heating and melting of dairy products such as butter, margarine, and chocolate - Achieves automation and labor-saving through rapid thawing. - The device can effectively heat thick materials to the center. On the day of the event, we will also have a consultation desk for specific inquiries regarding thawing, heating, drying, and sterilization using radio waves (high frequency and microwaves). 【Reasons for improvement with high-frequency thawing】 - Automation and line integration from raw material thawing to product. - Thawing and heating in a short time of 20 to 30 minutes. - Reduction of personnel through automation of thawing and continuous thawing processing. - Ensuring thorough thawing of the center (uniform thawing quality) (elimination of surface drip loss). - Thawing without using water (reduction of water usage) (improvement of hygiene) (improvement of working environment). - Elimination of excessive thawing (eradication of refreezing: reduction of food loss: thawing the necessary amount at the necessary time). Companies have achieved improvements in their issues.

We will be exhibiting at "Membrane City Membrane Seat 2026" held at the 7th floor exhibition hall of Wink Aichi. *Exhibited Machine Plan High-Frequency Welding Machine (Vinyl Welding Machine / Fusion Machine) CANEST-8A Achieving stable hybrid welding through the combination of high-frequency welding and heater heating! ● Space-saving and easy to move! Machine size W1000×D1250 allows installation in narrow spaces ● Suitable for various shapes such as linear, frame, and round! Capable of adjusting high-frequency output, allowing for welding of small quantities and various types with just one machine ● Stable product finish unaffected by the environment! By automatically controlling high-frequency and heater temperature, more precise welding is possible ● Safety with anti-clamping feature of the pressure device! Our original system prevents accidents caused by clamping. On the day, we will also conduct demonstrations of high-frequency welding. Please come and experience our machine with high precision, high efficiency output, and stable performance.

We will be exhibiting at "Medtec Japan 2026," held at Tokyo Big Sight, East Exhibition Hall, East Hall 7. *Exhibited Machines* Cutting-edge Transistor High-Frequency Welder EXAST-V Type - High-efficiency welding with a solid-state high-frequency oscillator. - High-precision pressure control and thickness regulation possible with a servo drive system. - Equipped with a high-precision load cell, enabling advanced OK/NG judgment function for welding by monitoring the reaction force from the workpiece. Tabletop Transistor High-Frequency Welder YRP-400T-RC Type - Usable with a standard 100V household outlet. - Space-saving tabletop size with a lightweight design of approximately 40kg. - Maintenance-free and long-lasting due to its transistor design. - Optimal heating with feedback control that suppresses reflected waves. - Pressure measurement possible with an electric cylinder. - No warm-up required, allowing immediate processing. We will also conduct demonstrations of high-frequency welding on the day. Please come and experience our machines with high precision, high efficiency, and stable performance.

We will be exhibiting at the "AICHI TENT EXPO 2026" held at the Blow-Up Hall No. 2 Fashion Exhibition Hall (Nagoya City Small and Medium Enterprise Promotion Hall). Exhibition Machine: Bucket Type Hybrid High-Frequency Welder Model CANEST-5U ● Large sheets can be smoothly welded! The bucket space at the back of the pressurized area minimizes fabric interference. ● Suitable for various shapes such as straight, frame, and round! Output adjustment for high frequency allows for welding of small quantities and various types with just one machine. ● Stable product finish unaffected by environmental conditions! By automatically controlling high-frequency and heater temperature, more precise welding is possible. ● Safety with anti-clamping function of the pressurizing device! Our original system can prevent accidents caused by clamping. We will also conduct a demonstration of high-frequency welding on the day of the event. Please come and experience the CANEST-5U model, which offers high precision, high efficiency output, and stable performance.

Yamamoto Binita Co., Ltd. will be exhibiting at the "Meat Industry Exhibition 2026" held at Tokyo Big Sight. At this exhibition, we will showcase high-frequency heating/thawing equipment necessary for thawing and heating frozen products such as beef, pork, chicken, dairy products, seafood, vegetables, and fruits. We achieve high-quality and rapid thawing processes. Main usage examples: thawing of beef, pork, chicken, sausages, ham, side dishes, seafood, squid, octopus, etc.; heating and melting of butter, whipped cream, chocolate, cocoa mass, and tempering; thawing and heating of sponge cakes and fruit juices; and other purposes (heating, drying, thawing, sterilization, pest control). We have a track record of introducing small, medium, and continuous large-scale machines. For inquiries regarding heating, drying, thawing, sterilization, and pest control using high-frequency/microwave technology, please feel free to contact us. We sincerely look forward to your visit.

This year, various subsidies are being solicited, and you may be familiar with the "Monozukuri Subsidy," but this time we would like to introduce the newly established "Labor-Saving Subsidy." The "Small and Medium Enterprises Labor-Saving Investment Subsidy" is designed to support capital investment aimed at labor-saving and operational efficiency. It is a very useful system for companies considering labor shortages and business improvements. Currently, it is being publicly solicited on the following schedule: 3rd Public Solicitation Start Date of Public Solicitation: June 27, 2025 (Friday) Start Date of Application Acceptance: Early August 2025 (planned) Deadline for Public Solicitation: Late August 2025 (planned) Announcement Date of Adoption: Late November 2025 (planned) Additionally, regarding the "Monozukuri Subsidy," which we have been continuously informing you about, applications are currently underway for the deadline at the end of this month. However, the schedule for future public solicitations is currently undecided. If you are considering utilizing subsidies, please feel free to consult with us as soon as possible.

Yamamoto Vinita Co., Ltd. (headquartered in Osaka City, President: Taiji Yamamoto), a top manufacturer of dielectric heating devices utilizing electromagnetic waves (high frequency, microwaves), has launched a comprehensive renewal plan for its Yao factory in Yao City, Osaka Prefecture, in response to the increasing demand for energy-saving and labor-saving devices driven by the promotion of carbon neutrality. Through this plan, the Yao factory will be expanded to consolidate device development and manufacturing functions among its two production bases, including the Kuboji factory located on the same site, thereby enhancing productivity and increasing device production volume by up to 2.5 times. Centered around this facility, the company aims to expand the electromagnetic heating device market and promote the dissemination of dielectric heating technology towards achieving carbon neutrality.

Today, we have an announcement regarding the exhibition. We will be participating for the first time in the "Next Generation Manufacturing Infrastructure Technology Industry Exhibition - Tech Biz EXPO 2025." This exhibition aims to help small and medium-sized enterprises and startups expand their sales channels, create innovations, and collaborate with business partners by showcasing the latest manufacturing technologies and products they possess. At our booth, we will also conduct demonstrations of tabletop welders, so please come and visit us. ■ Name: Next Generation Manufacturing Infrastructure Technology Industry Exhibition - Tech Biz EXPO 2025 Date: May 28 (Wednesday) to May 29 (Thursday), 2025 Venue: Fukiage Hall (Nagoya City Small and Medium Enterprise Promotion Hall) Booth Number: Mechanical Element Technology, Booth O30 If you have any inquiries or concerns, please contact us or reach out to our account. Catalogs and other materials can be downloaded from the Yamamoto Vinitar official website and IPROS (Ipros Manufacturing).

Yamamoto Vinitar will be exhibiting at 'FOOMA JAPAN 2025' held at Tokyo Big Sight. Exhibition Booth: East Hall 1, 1M-21 *Exhibited Equipment: High-Frequency Rapid Thawing Device TEMPERTRON-V2 Type* - Thawing of beef, pork, chicken, vegetables, seafood, etc. - Heating and melting of dairy products such as butter, margarine, and chocolate. - Achieves automation and labor-saving through rapid thawing. - It is used as a device that can effectively raise the temperature of thick materials to the center. On the day of the event, we will also have a consultation desk for specific inquiries regarding thawing, heating, drying, and sterilization using radio waves (high frequency and microwaves). 【*Reasons for Improvement with High-Frequency Thawing*】 - Thawing and heating in a short time of 20 to 30 minutes. - Automation and line integration from raw material thawing to product. - Reduction of personnel through automation of thawing and continuous thawing processing. - Desire for thorough thawing of the center (uniform thawing quality) (elimination of surface drip loss). - Thawing without using water (reduction of water usage) (improvement of hygiene) (improvement of labor environment). - Resolution of excessive thawing (elimination of refreezing: reduction of food loss: thawing the necessary amount at the necessary time). Various companies have achieved improvements in various issues.

Today, we have an announcement regarding the exhibition. We will be participating in the "High-Performance Materials Week Adhesive Bonding EXPO Osaka," which we also attended last year. This exhibition focuses on adhesive and bonding technologies that are essential in the manufacturing industry, covering everything from joining dissimilar materials to general applications. Our booth will showcase cutting-edge models, including a tabletop welder. We hope you will visit us. ■ Name: High-Performance Materials Week Adhesive Bonding EXPO Osaka Date: May 14 (Wed) - May 16 (Fri), 2025 Venue: Intex Osaka Booth Number: Hall 4, 20-57 If you have any inquiries or concerns, please contact us or reach out to our account. Catalogs and other materials can be downloaded from the Yamamoto Vinitar official website and IPROS (Ipros Manufacturing).

Today, we have an announcement regarding the exhibition. We will be exhibiting at "Medtech Japan 2025," which we also participated in last year. This is the only exhibition and seminar in Japan focused on the design and manufacturing of medical devices, taking place at Tokyo Big Sight from April 9 to April 11. It will be a valuable opportunity for companies and organizations planning to enter the medical field to gather information and conduct business negotiations. We will also be demonstrating the welding of our tabletop welder at our booth, so please come visit us. ■ Name: Medtech Japan 2025 Date: April 9 (Wednesday) to April 11 (Friday), 2025 Venue: Tokyo Big Sight, East Exhibition Hall, Hall 2 Booth Number: 1804 If you have any inquiries or concerns, please contact us or reach out to our account. Catalogs and other materials can be downloaded from the Yamamoto Vinitar official website and IPROS (Ipros Manufacturing).

Today, we have an announcement regarding subsidies. The 19th round of the "Monozukuri Subsidy" application has started from February 14th of last month. This program supports small and medium-sized enterprises and small businesses in developing products and services, with a subsidy rate of 1/2 for small and medium-sized enterprises and 2/3 for small and revitalization businesses. We are available for consultations regarding the subsidy and conducting preliminary hearings, so please feel free to contact us. Schedule: Application start date: April 11, 2025 (Friday) at 5 PM Application deadline: April 25, 2025 (Friday) at 5 PM

Today's announcement is about social media. In recent years, many companies have been active on social media, and our company is also sharing useful information and daily activities on SNS (Instagram, Facebook). We kindly ask you to follow the official Yamamoto Vinitar account! You can check it out via the URL in the related links.

Yamamoto Vinitar will be exhibiting at the 25th Japan International Seafood Show held at Tokyo Big Sight. The purpose of this exhibition is to conduct business negotiations face-to-face with customers from both Japan and abroad. Exhibited machine: High-frequency thawing device "TEMPERTON-V" For your reference, here are some case studies of its applications: - Seafood (fish, mackerel, whitebait, shrimp, octopus, squid, etc.) - Confectionery/bakery, candy, Japanese sweets ingredients (butter, margarine, shortening, spices, etc.) - Beef, chicken, pork, hamburgers, etc. - Vegetables and fruits (spinach, broccoli, oranges, pineapples, etc.) It is utilized for a wide range of processes including thawing using high frequency, heating, heating molding, puffing, pest control, sterilization, and drying using high frequency and microwaves. We can achieve reductions in water usage, alleviation of heavy labor, improvement of working conditions, uniformity in product quality both on the surface and internally, and thawing the necessary amount at the necessary time. We have established a consultation desk for microwave heating, and we sincerely look forward to your visit. For detailed materials, please download them or contact our company.

Yamamoto Vinita Co., Ltd. will be exhibiting at the "Meat Industry Exhibition 2025" held at Tokyo Big Sight. Booth Number: E7-GG24 At this exhibition, we will showcase high-frequency heating/thawing equipment necessary for thawing and heating frozen products such as beef, pork, chicken, dairy products, seafood, vegetables, and fruits. We achieve high-quality and quick thawing processes. Main usage examples: Thawing of beef, pork, chicken, sausages, ham, prepared foods, seafood, squid, octopus, etc. Heating and melting of butter, whipped cream, chocolate, cocoa mass, and tempering, as well as thawing and heating of sponge cakes and fruit juices. Other purposes include heating, drying, thawing, sterilization, and pest control. We have a track record of introducing small, medium, and large continuous machines. Please feel free to contact us for inquiries regarding heating, drying, thawing, sterilization, and pest control using high frequency/microwave technology. We sincerely look forward to your visit.

Yamamoto Vinita Co., Ltd. will exhibit at the "MOBAC SHOW 2025" held at "Intex Osaka." Booth Number: Hall 3, 329 We will showcase the high-frequency rapid thawing device 'TEMPERTRON-V type.' * Thawing/melting of butter, margarine, chocolate, etc. * Thawing of meat and drying of breadcrumbs 【Issues to Address】 - Thawing takes too long (Can we thaw in minutes instead of days?) - The temperature of the center of the material does not rise (We want to raise the temperature of the center without loosening the surface) 【Using a High-Frequency Thawing Device】 - It generates heat through radio waves, allowing for effective heating of the center. - It can raise the temperature in 10 to 20 minutes, enabling continuous workflow (no need for pre-preparation). - Since there is no external heating, discoloration of the parts does not occur. - No need to move items to the thawing freezer the day before. *Advantages of High Frequency* ■ Heats the center to a cuttable state of around +15°C to +18°C ■ Can also melt with just a few more minutes of heating 【Other Main Thawing and Heating Treatment Examples】 - Thawing of meat, pork, chicken, canned fish, heating and drying for confectionery and baking, tempering and melting of butter, thawing of seafood like squid and octopus, heating and secondary sterilization of prepared dishes, and more.

Happy New Year. I look forward to your continued support this year as well. Thank you very much for your exceptional patronage last year. This year, we will continue to focus on manufacturing, embodying the spirit of "imagining tomorrow through microwave heating." As a unique company, we will overcome challenges with the flexibility of a snake and strive to move forward with a mindset of always taking one step ahead. We are planning to participate in four exhibitions this year. Exhibitions scheduled for 2025: - April 9-11: MEDTEC JAPAN 2025 (Tokyo Big Sight) - October 15-17: Kyushu Monozukuri Fair (Marine Messe Fukuoka) - November 5-7: Messe Nagoya (Port Messe Nagoya) - November 12-14: Adhesive and Joining EXPO (Makuhari Messe) We will provide details as the dates approach. *2G: Welding, bonding, and drying in industries such as medical, automotive interiors, plastic materials, films, and sheets.

Yamamoto Vinita Co., Ltd. will exhibit at the "Tokyo Pack Exhibition 2024" held at "Tokyo Big Sight." We will showcase a demonstration of the high-frequency thawing device 'TEMPERTRON-V/V2 model.' The newly redesigned "TEMPERTRON-V/V2 model" has been developed with the following concepts: - "Easy": Automatic optimal setting for thawing conditions - "Fast": Improved thawing efficiency, reducing thawing time - "High Quality": Enhanced thawing quality for uniform thawing without inconsistencies We will have a panel display introducing high-frequency thawing devices, small batch systems, medium batch systems, and medium to large continuous systems, as well as a consultation desk for high-frequency and microwave heating. If you have any concerns regarding heating, drying, thawing, sterilization, secondary heating sterilization, or pest control, please visit us. [Main examples of thawing and heating processes] - Thawing of meat, pork, chicken, canned fish, heating and drying for confectionery and baking, tempering and melting of butter, thawing of seafood such as squid and octopus, secondary sterilization of prepared foods, and more.

Yamamoto Binita Co., Ltd. will exhibit at the "Food Factory Exhibition 2024" held at "Tokyo Big Sight." Concurrently held: "FOOD Exhibition 2024," featuring companies from all six sectors. We will demonstrate our high-frequency thawing device 'TEMPERTRON-V/V2 model.' The newly redesigned "TEMPERTRON-V/V2 model" has been developed with the following concepts: - "Easy": Automatic optimal setting for thawing conditions - "Fast": Improved thawing efficiency, reducing thawing time - "High Quality": Enhanced thawing quality, achieving uniform thawing without inconsistencies We will have a panel display (introducing high-frequency thawing devices, small batch systems, medium batch systems, and medium to large continuous systems) and a consultation desk for high-frequency and microwave heating. If you have any concerns regarding heating, drying, thawing, sterilization, secondary heating sterilization, or pest control, please visit us. 【Main Examples of Thawing and Heating Processes】 - Thawing of meat, pork, chicken, fish for canning, heating and drying for confectionery and baking, tempering and melting of butter, thawing of seafood such as squid and octopus, secondary sterilization of prepared foods, and more.

Yamamoto Vinita Co., Ltd. will be exhibiting at the '2023 Mobak Show (28th International Bakery and Confectionery Industry Exhibition)' held at Makuhari Messe. Our exhibition booth: 5K-03 At this exhibition, we will showcase high-frequency heating/thawing equipment necessary for the bakery and confectionery industry. Achieving high-quality heating treatment in the confectionery and bakery industry. Main usage examples: - Melting of butter, whipped cream, chocolate, cocoa mass, and tempering - Thawing and heating of sponge, fruit juice, beef, pork, chicken, sausage, ham, side dishes, seafood, squid, and octopus - Other purposes (heating, drying, thawing, sterilization, pest control). We have a track record of introducing small, medium, and large continuous machines. For inquiries regarding heating, drying, thawing, sterilization, and pest control using high-frequency/microwave technology, please feel free to contact us. We sincerely look forward to your visit. Note: The 'Meat Industry Exhibition 2023' will be held at Tokyo Big Sight starting from March 7th next week, where we will also be exhibiting.

Yamamoto Vinita will be exhibiting at "FOOMA JAPAN 2023" held at Tokyo Big Sight. This exhibition, which offers various solutions related to food manufacturing, welcomes around 100,000 visitors each year as a venue for solving challenges. We have prepared numerous measures that directly contribute to acquiring new customers and increasing sales, and we also offer programs to accelerate business matching. We sincerely look forward to your visit.

Yamamoto Binita will be exhibiting at the "Food Factory (FF) 2023 Food Factory Improvement Equipment and Engineering Exhibition" held at Tokyo Big Sight. This exhibition brings together companies involved in equipment improvement and engineering for food factories, serving as a specialized trade show that connects with management, production, engineering, and technical departments in the food manufacturing industry. We sincerely look forward to your visit.

Yamamoto Binita will be exhibiting at the "11th Fabex Kansai 2023" held at Intex Osaka. This exhibition is a specialized trade show for business use, highly recognized in Kansai for "prepared foods, delicatessen, bento, takeout, dining out, school meals, and meal delivery." Exhibited machine: High-frequency defrosting device "TEMPERTRON-V" With a proven track record of attracting approximately 300,000 visitors over the past nine events in the Kansai food market, we offer high-quality business negotiations with influential buyers. For reference, our case studies include: - Beef, chicken, pork, hamburgers, sausages, etc. - Confectionery/bakery, candy, Japanese sweet ingredients, (butter, margarine, shortening, spices, etc.) - Seafood (fish, mackerel, whitebait, shrimp, octopus, squid, etc.) - Vegetables and fruits (spinach, broccoli, oranges, pineapples, etc.) We utilize high-frequency defrosting, heating with high-frequency and microwaves, heating molding, puffing, pest control, sterilization, and drying across a wide range of applications. We have established a consultation desk for radio wave heating, and we sincerely look forward to your visit. For detailed materials, please download them or contact our company.

Yamamoto Binita Co., Ltd. will be exhibiting at the 35th Japan Manufacturing World "Healthcare and Medical Device Development Exhibition" held at Tokyo Big Sight. This exhibition consists of 10 specialized exhibitions featuring components, processing technologies, and measuring instruments for medical devices, allowing for a comprehensive comparison of various products related to the manufacturing industry. Additionally, business negotiations with overseas companies from 15 countries and regions, including South Korea, China, and Taiwan, will also be possible. We will also be showcasing samples at our booth. We sincerely look forward to your visit.

We are pleased to announce that our company will hold the "Yamamoto Vinitar Co., Ltd. and Fuso Co., Ltd. Joint Exhibition." We will showcase the high-frequency flash bonding machine "BONDEX Series <V>" and the high-frequency flat heating treatment device "REFIX Series <8M>." Additionally, we will offer on-site testing. For more details, please refer to the related materials. We sincerely look forward to your visit.