The EPIC specification industrial CPU board has the following features: ● 8th generation Intel(R) Core(TM) i-S series processor (LGA1151 socket type) ● Non-ECC DDR4 SODIMM x2 slots, supporting up to 32G (sold separately) ● HDMI x2 ● USB 3.1 / USB 2.0 x4 (rear), USB 2.0 x2 (pin header), COM x2 (pin header) ● mSATA x1 (full size) ● 12V DC input

The PICO-ITX standard CPU board has the following features: ● Equipped with 8th generation Intel(R) Core(TM) i7/i5/i3/Celeron processor SoC ● DDR4 SODIMM slot x1, maximum 16GB (sold separately) ● HDMI x2 ports ● Gigabit LAN x2, USB 3.2 x2 ● USB 2.0 x2, RS-232/422/485 x2, 4-bit DIO x1 (pin header) ● SATA 6.0Gb/s x1, mSATA slot x1 (storage sold separately) ● M.2 2230 (E Key) x1 ● DC 12V

This is a compact CPU board equipped with a low power consumption Core i series and has the following features: ● Intel(R) Core i7/i5/i3/Celeron processor on board ● Low power consumption ● On-board DDR4 memory (up to 16GB) ● Various expansion slots ● HDMI x1, DP x1

The AI edge PC has the following features: ● Equipped with 8th generation Intel(R) Core(TM) i7/i5/i3/Celeron processor SoC ● Onboard DDR4 (up to 16GB) ● 64GB eMMC storage ● HDMI x1, COM ports (RS-232/422/485) x2 ● 16-pin GPIO connectors x2 (1 for SMT32 + 1 for 40-pin HAT) ● DC input 12-60V ● Fanless design ● Ability to exchange various technical information and download Linux, Android OS images, and dedicated software from the community site (www.up-community.org)

■CPU Board 【CPU】Intel Atom(R) x7 E3950 (4 cores/4 threads/1.60 GHz) 【Memory】4GB onboard 【Graphics】Intel Gen9 HD (4K codec support) 【Storage】64GB eMMC onboard 【Display】HDMI×1, DP×1 【Ethernet】Gigabit LAN×2 【USB】USB3.0×3, USB3.0 OTG×1 【OS】Linux Ubuntu 18.04 + OpenVINO(TM) 【Dimensions】95mm×95mm×50mm ■Camera ■For AI CORE X, please refer to the data sheet.

The Ethernet switch has the following features: ● Compliant with railway standard EN50155 ● Ideal for railway vehicle applications ● Equipped with 8 PSE ports compliant with IEEE802.3af (up to 30W/port) ● Achieves recovery time of less than 10ms even for connections with over 250 units using O-Ring ● Can connect to other companies' ring technologies using O-Chain ● Supports MRP (Media Redundancy Protocol) function compliant with IEC 62439-2 standard ● Compatible with STP/RSTP/MSTP ● Supports PTP client ● Compatible with Modbus TCP protocol ● Enables secure network management with v1/v2c/v3 ● Supports RMON for traffic monitoring ● Compatible with VLAN and LLDP protocols ● Supports IP assignment to each device via DHCP for each port ● Equipped with relay bypass function on two gigabit ports ● Event notifications possible through Syslog, email, SNMP traps, and relay output ● Configurable via web-based interface, Telnet, and console (CLI) (Open-Vision) ● Equipped with M12 connectors ● Wall mountable

The Ethernet switch has the following features: ● Complies with railway standard EN50155 ● Ideal for railway vehicle applications ● Equipped with 16 PSE ports compliant with IEEE802.3af (up to 30W/port) ● Achieves recovery time of less than 10ms even with connections of over 250 units using O-Ring ● Compatible with other manufacturers' ring technologies via O-Chain ● Supports MRP (Media Redundancy Protocol) compliant with IEC 62439-2 standard ● Supports STP/RSTP/MSTP ● PTP client compatible ● Supports Modbus TCP protocol ● Enables secure network management with v1/v2c/v3 ● RMON support for traffic monitoring ● Supports VLAN and LLDP protocols ● DHCP support for IP assignment to each device via each port ● Equipped with relay bypass function on two gigabit ports ● Event notifications possible through Syslog, email, SNMP traps, and relay output ● Configurable via web-based interface, Telnet, and console (CLI) (Open-Vision) ● Equipped with M12 connectors ● Wall mountable

The railway-grade Gigabit PoE Ethernet switch has the following features: ● 10/100/500/1000 Base-T(X) with P.S.E. PoE ×4 ports ● PoE compliant with IEEE802.3at, supporting up to 30W per port ● Auto-negotiation and auto MDI/MDI-X support ● Store and forward transmission support ● Flow control support ● Broadcast storm protection support ● Equipped with robust M12 connectors ideal for railway and industrial use ● Wall mountable

The fanless industrial PC has the following features: ● Supports desktop socket type CPU and achieves fanless operation (CPU sold separately) ● Compatible with DDR4 ECC or non-ECC SO-DIMM, up to 64GB (sold separately) ● 4 Gigabit LAN ports (LAN includes 3 i211AT and 1 i219LM for LAN2) ● Equipped with 2 HDMI ports ● Equipped with 8 USB3.2 (Gen1) ports (C246 model) / 4 USB3.2 (Gen1) ports and 4 USB2.0 ports (H310 model) ● Equipped with 6 RS-232/422/485 ports ● DC input of 10 to 35V

The industrial embedded fanless PC has the following features: ● Capable of mounting Intel Skylake CPU for high performance and high graphics capabilities ● Can accommodate desktop-grade socket-type CPUs (sold separately) ● Supports DDR4 ECC/Non-ECC SO-DIMM (up to 32GB) (memory sold separately) ● Supports independent triple display with VGA + HDMI x 2 ● HDMI supports 4K display ● Equipped with 4 USB 3.0 and 2 USB 2.0 ports ● Equipped with 3 Intel industrial-grade Gigabit LAN ports ● Features 6 RS-232/422/485 ports selectable via BIOS ● Compact size ● Supports DC 9~36V input ● Models with 32-bit digital IO input/output are also available

This is an injector with the following features: ● Equipped with 10/100/1000Base-T(X) × 2 ports for power and data output ● Compliant with IEEE802.3at/802.3af ● Automatically protects against overvoltage input and overcurrent output ● Capable of providing a total power output of up to 90W ● Input voltage supports 50VDC to 57VDC ● Housing complies with IP-30 ● Can be mounted on DIN rails and walls

This is a Mini ITX specification industrial motherboard with the following features: ● 2 x DDR4 SODIMM slots (up to 32GB) ● Supports independent triple display (eDP x 1, LVDS x 1, VGA x 1) ● Intel(R) LAN i211AT x 1, 219LM for iAMT 12.0 x 1 ● 1 x M.2 slot (M key) ● 1 x M.2 slot (E key) ● Equipped with 1 x PCIe 3.0 [x1] slot

This is a Mini ITX specification industrial motherboard with the following features: ● Supports Intel® 8th generation Core™ LGA1151 processors ● DDR4 DRAM 2666MHz, (up to 32GB) ● M.2 slot (M key) x 1, M.2 slot (E key) x 1 ● USB 3.0 ports x 4, USB 2.0 ports x 4 ● Intel® LAN 211AT x 3, iAMT 12.0 x 1 for 219LM ● SATA 6.0 Gb/s x 2 ● PCI-Express [x16] (Gen3) x 1 ● ATX power supply

The industrial fanless embedded PC has the following features: ● Equipped with Intel(R) Celeron(R) N3350 ● 1 slot for 204-pin dual-channel DDR3L 1866MHz SODIMM (supports up to 8GB) ● 6 ports of 10/100/1000Base-TX Ethernet (supports 2 pairs bypass) ● 1 SIM socket ● +9 – 36V DC power input (terminal block input) ● 2 ports of RS-232/422/485 with ESD protection (COOM2 supports isolation) ● Operating temperature range of -40°C to 75°C

This industrial fanless compact PC features the following: ● Equipped with Intel Pentium N4200 / Celeron N3350 processors ● Slim chassis with a thickness of 37mm ● Rich I/O options (COM x 3, HDMI, VGA, USB ports, etc.) ● Wide operating temperature range of -30℃ to 60℃ ● Equipped with 2 Gigabit Ethernet ports and 4 USB ports ● Wall mount compatible

The PICO-ITX standard CPU board has the following features: ● Equipped with Intel(R) Pentium(R) N4200/Celeron(R) N3350 processors ● Available in on-board memory models of DDR3L 2GB/4GB ● On-board storage with eMMC 32GB ● Equipped with 2 Gigabit LAN ports ● HDMI 1.4b included ● USB3.0×2, USB2.0×2, SATA 6.0Gb/s×1 ● Equipped with M.2 B key (2280)×1 and M.2 E key (2230)×1 slots

The PICO-ITX standard CPU board has the following features: ● Equipped with 7th generation Intel(R) Core(TM) i5/i3 processor SoC ● DDR4 SODIMM slot x 1 (up to 16GB) ● 2 Gigabit LAN ports ● Supports HDMI 1.4b and LVDS 2 CH ● USB 3.0 x 2, USB 2.0 x 2, SATA 6.0 Gb/s x 1 ● COM1 supports RS-323, COM2 supports RS-232/422/485 ● M.2 B Key (2242) x 1, M.2 E Key (2230) x 1 ● Separate heat spreader available for purchase

The 17-inch industrial touch panel PC is equipped with the following features: ● 17-inch WXGA (1280 x 1024) TFT LCD ● Intel(R) 6th generation i5-6300U / Celeron 3955U processor ● Capacitive/resistive touch ● Aluminum casing ● Front bezel compliant with IP65 ● Fanless design ● IO expansion possible with optional OMNI IO module

The 21.5-inch industrial touch panel PC has the following features: ● Equipped with a 21.5-inch Full HD (1920x1080) TFT LCD ● Powered by Intel(R) 6th generation i5-6300U / Celeron 3955U processor ● Capacitive/resistive touch support ● Aluminum casing ● Front bezel compliant with IP65 ● Fanless design ● IO expansion possible with optional OMNI IO module

The 10.4-inch industrial touch panel PC has the following features: ● Equipped with a 10.4-inch TFT LCD ● Powered by Intel(R) 6th generation i5-6300U / Celeron 3955U processor ● Capacitive/resistive touch support ● Aluminum casing ● Front bezel compliant with IP65 ● Fanless design

The in-vehicle network video recorder PC has the following features: ● Fanless system ● 204-pin single channel DDR3L 1600 MHz SODIMM (up to 8GB) ● Independent dual-screen support (VGA x 1, HDMI x 1) ● Equipped with 6 ports of Realtek(R) Ethernet Connection, 4 of which support PoE ● Mini-PCIe sockets x 2 (full size) (1 x w/ USB) ● Built-in CAN 2.0B ● EMARK compliant

The fanless PC compatible with vehicle installation has the following features: ● Fanless structure ● 288-pin dual-channel DDR4 2133MHz SODIMM with 2 slots (supports up to 32GB) ● A total of 6 Gigabit LAN ports, with 4 ports supporting PoE (the photo shows a custom configuration with a maximum of 8+2 ports, which incurs a MOQ) ● 3 mini PCIe sockets (2 full-size + 1 half-size), 1 mSATA slot ● Built-in CAN 2.0B ● E-mark certification obtained ● MOQ of 50 allows for PoE×8 or changes to CPU options of i5 or i7

The industrial fanless PC equipped with PoE ports has the following features: ● Capable of supporting desktop-grade socket-type processors (please refer to the data sheet for compatible optional CPU processors) ● Supports DDR4 ECC or Non-ECC SODIMM (up to 32GB) ● Capable of displaying on three screens with VGA + HDMI x 2 ● HDMI supports 4K display ● 802.3at GbE PoE x 4 (max. 80W in total) ● USB 3.0 x 6 ● Intel(R) industrial-grade GbE LAN x 3 ports ● RS-232/422/485 x 6 ports ● Supports DC 9~36V input ● 32-bit digital

This compact PC for IoT edge devices has the following features: ● Equipped with Intel Celeron/Pentium (Apollo Lake) ● High performance and low power consumption ● Supports Windows 10, Ubilinux, Ubuntu, Yocto, and Android Marshmallow ● Allows for information exchange on various technologies and downloading of Linux, Android OS images, and dedicated software from the community site (www.up-community.org)

This industrial fanless compact PC features the following: ● Equipped with Intel Pentium N4200 / Celeron N3350 processors ● Slim chassis with a thickness of 37mm ● Rich I/O options (COM x 3, HDMI, VGA, USB ports, etc.) ● Wide operating temperature range of -30℃ to 60℃ ● Equipped with 2 Gigabit Ethernet ports and 4 USB ports ● Wall mount compatible

This industrial fanless compact PC equipped with an Atom(TM) processor has the following features: ● Equipped with Intel(R) Pentium(R) N4200 / Celeron(R) N3350 processor ● Onboard DDR3L 2G/4G memory ● Onboard 32GB eMMC storage ● Equipped with 1 Gigabit LAN port ● HDMI x 1 ● USB 3.0 x 2

This is a PC type equipped with an UP board. It is ultra-compact and comes with a VESA plate and AC adapter model. It can be used as a PC with this one unit. (*OS sold separately) It has also been featured in the article below on Digital ASCII. Please refer to it. We have stock available in Japan, so immediate delivery is possible.

It is a high-performance version of the UP board, equipped with USB 3.0 and two Gigabit LAN ports. It has also been featured in the article below on Digital ASCII. Please refer to it. Some model numbers are in stock in Japan, so immediate delivery is possible. http://ascii.jp/elem/000/001/591/1591658/index-2.html

This is an ultra-compact CPU board that is the same size as a Raspberry Pi and supports Windows 10, Linux, and Android via IO. It has also been featured in the article below on Digital ASCII. Please refer to it. There is stock available in Japan, and it can be shipped immediately. It also supports a Raspberry Pi-compatible 40-pin header!! A big introduction to the ultra-compact PC board "UP Board"! http://ascii.jp/elem/000/001/591/1591658/

The PICO-ITX standard Rockchip-equipped CPU board has the following features: ● Equipped with Rockchip RK3288 ARM Cortex(TM)-A17 Quad-core 1.6 GHz ● Onboard DDR3L 2GB memory ● Onboard 16GB eMMC ● Micro SD slot (up to 64GB) ● Gigabit Ethernet x1 ● 18/24-bit dual-channel LVDS, eDP, HDMI compatible ● RS-232 x1, RS-232/422/485 x1 compatible ● USB 2.0 x3, USB OTG x1, mini PCIe x1 (for 3G/4G module)