"High-Temperature Heating, Tensile Compression, In-Situ Observation" Atmosphere control also / High-Temperature Tensile Compression Observation Device "CATY-T3H" Achieves space-saving with a compact tabletop design.

米倉製作所

The "CATY-T3H SYSTEM" is a tabletop high-temperature tensile observation device that allows for thermal fatigue testing while observing the condition of the sample surface in real-time. It employs a dual-swing crosshead design to keep the sample position centered and ensure no changes are missed!

Date and time
Capital
Entry fee

Related product information

High-temperature heating, tensile compression, on-site observation, atmosphere control as well / CATY-T3H
Tests can be conducted while observing the condition of the material surface [using a dual-swing crosshead], keeping the sample position centered to capture any changes!

【Specifications】《Tensile Module》　Load Capacity: 2kN (200kgf) or 5kN (500kgf) 　Test Speed: 0.001 to 10mm/min 　Effective Length of Specimen: Up to 60mm 《Heating Furnace》　Heating Method: Infrared two-elliptical-cylinder concentrated heating method 　Temperature Range: 60 to a maximum of 1500℃ 　Temperature Control: Digital program PID-SCR control 《Observation》　Objective Lens: Long working distance (×5, 10, 20, 50), low magnification zoom lens, variable magnification microscope 　Atmosphere: In air, in gas flow, in vacuum 　XY Stage: X-axis ±50mm / Y-axis ±10mm *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Ultra-High Temperature Observation Laser Microscope System VL3000DX-SVF18SP
High-resolution in-situ observation under environments up to 1800℃. For research and material development of ceramics, secondary batteries, etc.!

【Specifications】 ■ System Name VL3000DX-SVF18SP ■ Configuration [ Leather Head VL3000DX ] [ Heating Device SVF18SP ] ■ Options [ Heating Load Device SVF12FYC ] * Specifications are subject to change without notice.
Research and Development of Secondary Batteries and All-Solid-State Batteries: Efficient Electrolyte Evaluation using a Heating Furnace
Minimize work inside the glove box ◎ Screening of solid electrolyte materials / Impedance evaluation by temperature characteristics ◎ Multiple uniform, short time, and accurate test evaluation

Temperature range: RT ±20~1200℃ Temperature control accuracy: ±1℃ (relative to temperature protocol) Heating speed: MAX 300℃/min Coin cell holder: 4 slots (can heat/measure under the same conditions) Structure: Heating while electrodes are attached to the top and bottom of the coin cell Coin cell diameter: Φ20~Φ8mm Heating method: Light concentration heating 【Heating test procedure】Set the sample in the holder → Seal inside the quartz tube → Take it outside as is → Just set it in the heating device.