AQUASYSTEM株式会社 head office・Sugoshi Factory・Overseas Subsidiary（CHINA・THAILAND・VIETNAM） Official site

You can easily tell if the liquid in the drum is full or empty with just one touch!

<Product Description> 1) Measurement can be easily done with a single touch, making the confirmation work for full and empty states hassle-free. - Pressing the white switch lights it up red, and it automatically stops after 3 minutes. - To resume, simply press the switch again. - When full or empty, a buzzer sounds for 15 seconds and flashes red. * Pressing the switch stops the sound. - The position of the sensor can be adjusted to set the liquid level line for full and empty states. 2) It uses batteries and can be used approximately 1,000 times with a single battery replacement. - It uses 4 standard alkaline batteries (AA size). - It also supports lithium batteries, which are twice as durable as conventional ones and last longer in cold environments. <Sensor Type Liquid Level Gauge for Full/Empty Product Specifications> Model: GDB-CF/GDB-CL Measuring Method: Sensor Type (Contact Type) Applicable Liquids: Low viscosity oil, kerosene, light oil, water, wastewater, waste liquid Recommended Battery: 4 AA alkaline batteries Liquid Temperature Range: 0℃ to 40℃ Size (mm): Φ97×265/97×1070 Weight (kg): 0.4/0.7

A liquid level gauge that can be connected to an air pump to check whether the liquid in a JIS standard 200L drum is full or empty.

Model: GDA-HH/GDA-HL Type: For JIS standard 200L drums Liquid used: Oil, kerosene, light diesel, solvent Usable viscosity (cP): 3,000 Recommended supply pressure (Mpa): 0.3 to 0.6* Connection diameter: G3/4 Temperature range: Operating (°C) 0 to 60 (depending on usage environment) Storage (°C): 0 to 60 (depending on usage environment) Liquid temperature (°C): 0 to 60 Calculation method: Contact-type sensor Air supply port: Air coupler plug (male) Air output port: Air coupler plug (female) Dimensions (mm): 178×460 / 178×1160 Connection material: Body: SUS304 Packing: – Weight (kg): 1.8 / 2.2