Aiming for Zero Workplace Accidents! How to Choose the Right Protective Gloves [Environmental Measures VOL.8]

エー・エム・プロダクツ

This time, we will focus on cut injuries and chemical damage, which are believed to be prevalent not only in labor accidents but also in near misses, and explain the characteristics of protective gloves and their proper usage. Work that requires protective equipment occurs not only in manufacturing but also in various industries. Among the many types of protective gear, gloves in particular come in a wide variety, and there may be cases where they are used improperly, reused, or not used at all despite the work being hazardous. However, allowing such situations to persist leads to the neglect of [unsafe behaviors] and [unsafe conditions], as discussed in VOL.3, which increases the likelihood of labor accidents. In 2023, "cuts and abrasions" ranked fifth (5.61%) in labor accidents, while "contact with harmful substances" ranked thirteenth (0.45%). However, it is believed that there are potentially many more near misses that did not result in labor accidents. This time, we will focus on the more frequent cut injuries and chemical damage, discussing the characteristics of each type of protective glove and their proper usage.

Date and time
Capital
Entry fee

Related product information

How to Choose Appropriate Protective Gloves [Environmental Measures VOL.8]
This will focus on cut injuries and chemical damage, which are believed to be common not only in labor accidents but also in near misses, explaining the characteristics of protective gloves and their proper usage.

P.03 / Introduction P.04 / Types of protective gloves to prevent cuts and chemical damage Cut-resistant gloves Chemical protective gloves P.06 / World standard safety: About European standards P.09 / Proper use of protective gloves based on labor accident cases Case 1: Dermatitis caused by organic solvents Case 2: Injury to fingers during waste disposal work with a cutter Case 3: Container with phenol solution tipped over, resulting in facial and hand injuries from liquid splatter P.15 / Conclusion ■ Listed product model numbers Product name: Silver Shield Model number: SSG-09-10 Product name: Vertigo Gray PU C&G B Model number: 2318767WIP-10 Product name: Secupro 625 Model number: NO.625001 Product name: Trilight 994 Model number: GLV162 Product name: Be Safe Pro 922N Goggles Model number: BS922N (Neoprene headband)
Basic Knowledge of Safety Protective Equipment to Ensure Worker Safety [Environmental Measures VOL.3]
We will introduce the basics of risk assessment and safety protective equipment to ensure the safety of workers.

P.03 / Introduction P.04 / Mechanism of Work Accidents P.07 / "Risk Assessment" Useful for Preventing Work Accidents P.09 / Basic Knowledge of Personal Protective Equipment P.11 / Summary P.12 / Introduction of Useful Products for Personal Protective Equipment P.13 / A.M. Products Co., Ltd. Company Overview
In facilities that handle chemical substances, wearing protective goggles has become mandatory.
The Ministry of Health, Labour and Welfare has established new regulations to prevent labor accidents caused by chemical substances.

● Be Safe Pro 314 Model Number: BS314YG Size: Width 142mm × Depth 65mm × Height 45mm Product Weight: 18g Material: Lens: Polycarbonate, Temples: Polycarbonate, Temple Tips: TPE (Thermoplastic Elastomer) Lens: Clear Anti-Fog Standards/Flame Resistance: ANSI Z87.1 (American National Standards Institute) ● Be Safe Pro 689 Model Number: BS689CLAF Size: Width 155mm × Depth 60mm × Height 50mm Product Weight: 38g Material: Polycarbonate Lens: Clear Anti-Fog Compatible with Prescription Glasses: Yes Standards/Flame Resistance: ANSI Z87.1 (American National Standards Institute) ● Be Safe Pro 689 Model Number: BS922N Size: Width 190mm × Depth 100mm × Height 80mm Product Weight: 115g Material: Lens: Polycarbonate, Frame: Polyvinyl Chloride, Headband: Neoprene Rubber Lens: Clear Anti-Fog Compatible with Prescription Glasses: Yes Indirect Ventilation Holes: Yes Standards/Flame Resistance: ANSI Z87.1 (American National Standards Institute)
Disposable gloves for work with hazardous chemicals "Silver Shield"
Compatible with a wide range of solvents. Can be used as inner gloves.

【Compatible Substances】 Acetone, Isobutyl Alcohol, Hydrochloric Acid, Chloroform, Ethyl Acetate, Dichloromethane, Nitric Acid, Hydrofluoric Acid, Benzene, Toluene, DMF, THF, MEK, PCB Product Name: Silver Shield Model Number: SSG-10 Thickness: Approximately 0.06mm Material: Polyethylene, EVOH Length: Approximately 37cm Quantity: 10 pairs Sizes: M, L *For more details, please refer to the PDF document or feel free to contact us.
Safety cutter "SecuPro 625"
A cutter with a safety design that automatically retracts the blade when cutting is finished. It's a precaution against accidents when cutting cardboard and packaging materials!

Product Name: Secupro 625 Model Number: NO.625001 Size: Length 154mm × Width 59mm × Thickness 22mm Weight: 151g Main Material: Aluminum, Rubber, Plastic Replacement Blade: NO.60099 (10 pieces included. Each piece can be used twice.) *For more details, please refer to the PDF document or feel free to contact us.
Drug-resistant thin gloves "Try Lights"
Thin chemical-resistant gloves made with three types of materials and featuring three characteristics!

【Specifications】 ■Material: Mixed material of natural latex, neoprene, and nitrile ■Length: Approximately 25.5 cm ■Thickness: Approximately 0.15 mm ■Quantity: 100 pieces per box ■Size and Weight ・GLV162-S: Size S, approximately 700 g per box ・GLV162-M: Size M, approximately 760 g per box ・GLV162-L: Size L, approximately 800 g per box ・GLV162-XL: Size XL, approximately 880 g per box *For more details, please refer to the PDF document or feel free to contact us.

Related catalog