Hertz Electronics Co., Ltd. will sequentially release three new products as part of its "Poka-Yoke Tools," a group of IoT tools that support the prevention of operator errors (poka-yoke) in production processes such as assembly and inspection, where high quality is required. The new products are the insertion unit "PU-SX," the pulling unit "PC-SX," and the screw locking agent attachment "TFC-100-01-850." The PU-SX and PC-SX are products that enable poka-yoke for various insertion and pulling tasks, such as connectors and clips for circuit boards, by exchanging the tip and spring. Additionally, the TFC-100-01-850 allows for poka-yoke in the application of screw locking agents by being retrofitted to your existing screw locking agent (bottle). These products will be showcased for the first time at our booth (booth number: S31-8) during the "9th Smart Factory EXPO," which will be held from January 22 (Wednesday) to January 24 (Friday), 2025, at Tokyo Big Sight, South Exhibition Hall, 4th floor. If you are interested, please be sure to visit our booth.

"Ensuring the safety of workers operating in hazardous environments" En GuardⓇ will update the software of its "Remote Monitoring System for Gas Detection" to version V2.00. This upgrade will support gas detection for manhole and pit work, and with the introduction of relay devices, it will extend the communication range to approximately 900m indoors and about 2.6 km in line of sight. This system quickly alerts nearby workers and supervisors in distant locations when the risk of gas poisoning or oxygen deficiency increases, thereby protecting the safety of the workers. The system consists of the En Guard Portable "ENP-BT01J" carried by workers, the safety monitoring software "En-Guard plus for Gas Monitor" for supervisors to oversee worker safety, and the En-Guard Hub "ENH-LR01J". It collaborates with RIKEN KEIKI Co., Ltd.'s portable gas monitors "GX-3R Pro", "CO-04BT(C-)", "CX-04BT", and the hazardous gas detector "GX-2100" for manhole and pit work via BluetoothⓇ.

Hertz Electronics Co., Ltd. will update the software of the simple contact wireless transmission unit "WCP LR16J," which enables wireless transmission of up to 16 points between devices over approximately 300m indoors and about 2,000m in line of sight, to version V2.00. By upgrading to V2.00, in addition to the conventional communication configuration of "1:1," it will also support communication configurations of "1:4," "4:1," and "1:N (broadcast communication)." The WCP-LR16J is equipped with our compact LoRa wireless module operating in the 920MHz band and features "easy setup, ready to use when connected to equipment (no wiring work required)," "switchable contact input transmission and contact output reception," and "wireless transmission possible up to approximately 300m indoors / about 2,000m in line of sight." The WCP-LR16J can be used in various cases in industrial settings, including: - Abnormality and operation monitoring from production equipment - Start/stop instructions between AGVs and stations - Alarm monitoring from environmental measurement devices - Demand control of air conditioning outdoor units - Status monitoring of production robots - Monitoring of various liquids in plant tanks and piping, etc.

Hertz Electronics Co., Ltd. will launch a new product, the "Remote Monitoring System for Gas Detection," equipped with our compact LoRa wireless module, as part of our "En-Guard" line aimed at "ensuring the safety of workers in hazardous environments." This system quickly alerts nearby workers and supervisors in distant locations when the risk of gas poisoning or oxygen deficiency increases at the worksite, thereby protecting the safety of the workers. The system consists of the En-Guard Portable "ENP-BT01J" carried by the workers, the safety monitoring software "En-Guard plus for Gas Monitor" for supervisors to oversee the safety of the workers, and the En-Guard Hub "ENH-LR01J," which integrates with the portable gas monitor "GX-3R Pro" manufactured by RIKEN KEIKI Co., Ltd. via Bluetooth.

Hertz Electronics Co., Ltd. will upgrade the software of the simple poka-yoke counter "TW-800R-SCL" and the mobile poka-yoke counter "TW-800R-MCL," which are poka-yoke receivers (poka-yoke counters) equipped with a counting function, to version 2.00. These devices are part of the "Poka-Yoke Tools," a set of IoT tools that support the prevention of operator errors (poka-yoke) in production processes where high quality is required. Since the release of the TW-800R-SCL in 2018 for customers who want to start poka-yoke with tools immediately, the need to prevent work omissions in job sites using battery tools, check pens S (marking pens), torque wrenches, and other tools has been increasing, leading to a rise in adoption in work environments year by year. To respond to requests from customers both domestically and internationally, version 2.00 will include the addition of a new mode, "Simple Count Mode" (a mode that counts up only and does not make judgments), as well as features such as counting up function, judgment function using a work timer, work number display function, and LAN output function for work performance data during "Standalone Mode."

Hertz Electronics Co., Ltd. will hold an "Online Exhibition Autumn 2022" on our website for one month from September 28, 2022 (Wednesday) to October 31, 2022 (Monday) under the theme of "Poka-Yoke Festival." We will showcase three highly demanded Poka-Yoke examples from our extensive implementation track record in manufacturing sites, as well as three Poka-Yoke examples that meet customer requests, with detailed explanations provided by our sales representatives in videos. We hope this will assist you in considering measures to prevent operational mistakes and omissions (Poka-Yoke) in your manufacturing sites. We sincerely look forward to your visit. 【Event Overview】 - Name: Online Exhibition Autumn 2022 "Poka-Yoke Festival" - Dates: September 28, 2022 (Wednesday) to October 31, 2022 (Monday) - Venue: https://www.herutu.co.jp/event/202209_online_event.html *Please visit the above page at your convenience during the event period. - Organized by: Hertz Electronics Co., Ltd. 【Exhibition Content】 ■ Introduction of examples with high demand in manufacturing sites ■ Introduction of examples that meet customer requests ■ Various tools for Poka-Yoke

The TW-800R-SLNX can be paired with two transmitters (tools) and can output work performance data to PLCs or PCs via LAN. While the number of pairable transmitters (tools) is limited compared to the Pokayoke receiver "TW-800R-EXL," which can also connect via LAN, it allows for a cost-effective implementation of Pokayoke in production processes that utilize one to two tools. ◇ Main features of the LAN-connected Pokayoke receiver TW-800R-SLNX The TW-800R-SLNX is a Pokayoke receiver designed for production processes using tools (such as in assembly, machining, and pressing) for customers who are troubled by "missing work." 1. It can be paired with two transmitters (the current number of paired devices is displayed via LED). 2. It can output work performance data to PLCs or PCs via LAN. 3. The external output time can be finely set (in 12 steps within 50ms to 1s). 4. The double count prevention time can be finely set (in 19 steps within 10ms to 15s). Please note that it is only available for use in Japan.

As a result of applying to the "1st IoT Tool Recruitment Event for Medium and Small Manufacturing Industries" organized by the "Robot Revolution Initiative Council" supported by the Ministry of Economy, Trade and Industry, our company's "Wireless Andon Display Device" was selected for "D. General Visualization of the Workplace" and our "Wireless Poka-Yoke Tool" was selected for "I. Employee Work Assistance and Error Prevention," both of which were adopted as "Smart Manufacturing Support Tools." We will continue to work as a member of the manufacturing industry to contribute to society through the utilization of IoT and to create new business models.