We have published the "Fixed Installation Type Ultrasonic Flow Meter (Doppler Type) HIT108-D" handled by Hi-Tech. Since it can measure without contact, it is capable of measuring corrosive fluids. Additionally, it is hygienic for fluids such as food. It accommodates a wide range from small to large diameters. Target flow range: 0.05 to 12 m/s Main product listed: HIT108-D Main features: ■ Can be installed without piping work on existing pipes. ■ Non-contact measurement allows for the measurement of corrosive fluids. It is also hygienic for fluids such as food. ■ There are no detectors inside the piping, resulting in zero pressure loss. ■ Since it does not come into contact with the fluid, maintenance is minimal. ■ It can accommodate a wide range from small to large diameters. ■ The cost performance for large diameters (300A and above) is outstanding. ■ Suitable for fluids that cannot be measured by time-of-flight methods due to the presence of sludge, bubbles, or suspended solids. Contact information: Hi-Tech Co., Ltd. 1-34-12-101 Shimouma, Setagaya-ku, Tokyo 154-0002, Japan TEL 03-5430-2301 FAX 03-5430-2302 E-mail hitech@flow-tech.jp

High Tech has published the "Fixed Installation Type Ultrasonic Flow Meter (Time Difference Method) ISTT-D9000." It can measure non-contact, making it suitable for corrosive fluids. Additionally, it is hygienic for fluids such as food. It accommodates a wide range of pipe diameters from small to large. Target flow range: 0.01 to 12 m/s Main product listed: ISTT-D9000 Main features: ● One detector can handle large diameters up to φ3000mm ● Equipped with the latest DSP chip for improved accuracy and reliability ● Enhanced user assistance features, including a self-diagnosis program ● Easy setup with an interactive keypad ● Compact and lightweight for easy installation ● Displays both forward and reverse flow ● Reverse negative integration can also be set ● Excellent reproducibility and linearity ● Improved measurement performance during bubble intrusion ● Capable of measuring fluids with unknown sound speeds Contact information: High Tech Co., Ltd. 1-34-12-101 Shimouma, Setagaya-ku, Tokyo 154-0002, Japan TEL: 03-5430-2301 FAX: 03-5430-2302 E-mail: hitech@flow-tech.jp

Hi-Tech has published the "Portable Ultrasonic Flow Meter (Time-of-Flight Type) SL1288i/1278HD." It can measure non-contact, making it possible to measure corrosive fluids. Additionally, it is hygienic for fluids such as food. It accommodates a wide range from small to large diameters. Target flow range: 0.01 to 12 m/s Main products listed: SL1288i/1278HD Main features: ● One detector can handle diameters up to φ3000mm ● Equipped with the latest DSP chip for improved accuracy and reliability ● Enhanced user assistance features such as self-diagnosis programs ● Easy settings with an interactive keypad ● Compact and lightweight for easy installation ● Displays both forward and reverse directions ● Reverse negative integration can also be set ● Excellent reproducibility and linearity ● Improved measurement performance when bubbles are present ● Can measure fluids with unknown sound speeds Contact information: Hi-Tech Co., Ltd. 1-34-12-101 Shimouma, Setagaya-ku, Tokyo 154-0002, Japan TEL 03-5430-2301 FAX 03-5430-2302 E-mail hitech@flow-tech.jp

The "UA102 Series" integrated ultrasonic flow meter with easy installation is an ultrasonic flow meter that achieves low cost, compact design, and simple installation. Since the detector is only installed on the outside of the piping, no processing of the piping is required. Main features: - Installation time is about 1 minute! - Can measure a minimum of 4mm in diameter! - Easy installation of the flow meter itself, no construction required for existing piping - Compact design with integrated display - Requires almost no installation space - Usable for clean water, seawater, oil, chemicals, etc. - Maintenance-free due to non-contact with the liquid We offer 4 types in the lineup: 1. Integrated display type UA102 series 2. Separate display type UA102-S series 3. Separate display type high temperature UA102-HiT series 4. Separate display type UA102-Sani series *For more details, please refer to the PDF catalog.

High-tech's comprehensive catalog of micro flow meters has been published, featuring "Flow Meters for Micro Flow Measurement." Target flow range: 2 to 1000 cc/min Main featured products: ■ Impeller flow meters 803, 903, 1003, FT2 series ■ Inline ultrasonic flow meters atrato 710, metra flow 240-020 series ■ Volumetric flow meters OG1 series ■ Thermal mass flow sensors SDNC502, SDN552/5 series SDN503, SDN***-DYN series

The "pflow UA102-Sani Series" is a sanitary/CIP high-temperature cleaning compatible ultrasonic flow meter that achieves low cost, compact design, and easy installation while being an ultrasonic flow meter. Since the detector is simply installed on the outside of the piping, no processing of the piping is required. Main Features: ■ Sensor and converter are separated The detector part is non-contact with the fluid ■ Temperature range: max. 150℃ Can also handle high-temperature fluids such as food cleaning (CIP) liquids *For more details, please refer to the PDF catalog.

The "pflow UA102 series" is a compact, low-cost ultrasonic flow meter with an integrated easy-installation display. It allows for installation without the need for pipe modifications, as the detector is simply mounted on the outside of the pipe. Main features: - Installation time is approximately 1 minute! - Capable of measuring a minimum diameter of 4mm! - Easy installation of the flow meter itself, no construction required for existing piping - Compact design with an integrated display - Requires minimal installation space - Usable for clean water, seawater, oil, chemicals, etc. - Maintenance-free due to non-contact with the liquid

High-tech offers "battery-operated flow meters." Various lineups including inline, insertion, and clamp-on types. ■ Battery-operated insertion electromagnetic flow meter Since it is an insertion type, there is no need for construction such as replacing the entire piping. Just drill a hole in the piping and insert it. ■ Battery-operated inline electromagnetic flow meter No operation is required; it is the easiest battery-operated electromagnetic flow meter. ■ Battery-operated insertion impeller flow meter There is a screw connection type, and it can also be installed on existing saddle water taps, etc. ■ Portable ultrasonic flow meter No processing required for piping! Flow measurement can be performed from the outside of the piping.

High-Tech Corporation publishes "Volumetric Flow Meters / Turbine Flow Meters / Hydraulic Testers" for hydraulic, lubricating, operating oils, and high-viscosity applications. 【Featured Products】 ■ Volumetric Flow Meters OG Series ■ Turbine Flow Meters LT and CT Series ■ Hydraulic Testers The product catalog also introduces many major applications and configuration diagrams that are not included.

We have published a catalog featuring agricultural water and potable water "ultrasonic time-difference flow meters / insertion-type electromagnetic flow meters / converters and indicators" handled by High Tech Co., Ltd. 【Featured Products】 ■ Ultrasonic Time-Difference Flow Meter SL1168 ■ Ultrasonic Time-Difference Flow Meter ISTT-D Series ■ Insertion-Type Electromagnetic Flow Meter EX Series ■ Converters and Indicators FT400 Series ■ Installation Examples and Delivery Records The product catalog also includes many examples of on-site inspections, installation examples, configuration diagrams, and reference images that are not included in the catalog.

We have published a catalog for the "Ultrasonic Doppler Flow Meter / Ultrasonic Flow Meter for Open Channels" that handles sludge, wastewater, drainage, and non-full water channels by Hi-Tech Co., Ltd. 【Featured Products】 ■ Ultrasonic Doppler Flow Meter SX Series ■ Ultrasonic Flow Meter for Open Channels OCM Pro The product catalog also introduces on-site supervision work, inspections, and installation reference examples that are not included in the catalog.

Hi-Tech introduces excellent "flow meters" and "flow switches" that are active around the world. We carefully select high-performance and high-quality products, and our after-sales support is thorough. We have numerous delivery records in various fields in Japan, and our products are widely used across a broad range of applications. Main content featured: ■ Ultrasonic flow meters ■ Hydraulic and oil flow meters ■ Vibrating density meters ■ Impeller flow meters ■ Thermal mass flow sensors / flow switches ■ Electromagnetic flow meters