We have published the catalog for the 'Sanitary/CIP High-Temperature Cleaning Compatible Easy Installation Ultrasonic Flow Meter pflow UA102-Sani Series.'

ハイテック

The "pflow UA102-Sani Series" is a sanitary/CIP high-temperature cleaning compatible ultrasonic flow meter that achieves low cost, compact design, and easy installation while being an ultrasonic flow meter. Since the detector is simply installed on the outside of the piping, no processing of the piping is required. Main Features: ■ Sensor and converter are separated The detector part is non-contact with the fluid ■ Temperature range: max. 150℃ Can also handle high-temperature fluids such as food cleaning (CIP) liquids *For more details, please refer to the PDF catalog.

Date and time
Capital
Entry fee

Related product information

Ultrasonic Flow Meter | Display Unit Separate Type UA102-Sani Series
Just clamp it in the piping and tighten the screws! Sanitary/CIP high-temperature cleaning compatible easy installation ultrasonic flow meter.

Main Specifications Measurement Flow Rate Range: 0.1 to 5.0 m/s Measurement Accuracy: ±1.0% F.S. Reproducibility: ±0.8% Measurable Fluids: Water, Oil, Chemicals, etc. (*1) Output: 4-20 mA DC Communication: RS485 Power Supply: 24 V DC (Power Consumption: 3 W) Compatible Piping: "Sanitary Stainless Steel Piping, Other Plastic Sanitary Piping" Power Cable: Display: Instantaneous / Cumulative Flow Values, Ultrasonic Reception Sensitivity Values Power Cable: M12 Connector, 5-core, 2 m Transducer Cable: M12 Connector, 2 m Keypad: 4 Touch Buttons Housing: Aluminum Alloy Fluid Temperature Range: 0 to 150 °C Ambient Temperature Range: 0 to 50 °C Protection Rating: Transducer: IP54, Detector: IP65 (*1) Regarding Measurement of Oil and Chemicals Some oils and chemicals may contain fluids that cannot be measured (e.g., those with high viscosity that are difficult for ultrasonic waves to pass through). Please conduct a demonstration at the intended installation location, piping, and measurement fluid in advance to confirm accurate measurement. ● For more details, please contact us or download the catalog.
Ultrasonic Flow Meter | Integrated Display Type UA102 Series
Just clamp it between the pipes and tighten the screws! No pipe processing required. Compact size integrated simple installation display device ultrasonic flow meter.

Main Specifications Measurement Flow Rate Range: 0.1 to 5.0 m/s Measurement Accuracy: ±1.0% F.S. Reproducibility: ±0.8% Measuring Fluids: Clean water, seawater, oil, chemicals, etc. (*1) Power Supply: 24 VDC (Power Consumption: 3W) Keypad: 4 touch buttons Display: 128×64 OLED Temperature Range: Indicator Unit: 0 to 50°C, Detection Unit: 0 to 50°C Humidity: RH: 0 to 95%, provided there is no condensation Housing: Aluminum alloy Cable: M12 connector, 5-core, 2m Output (Optional): 4-20 mA DC, RS485, Optional: OCT output *1 Regarding the measurement of oil and chemicals Some oils and chemicals may contain fluids that cannot be measured (e.g., those with high viscosity that do not transmit ultrasonic waves well). Please conduct a demonstration at the intended installation site, including piping and measuring fluids, to confirm accurate measurement. ● For more details, please contact us or download the catalog.