ハイテック Official site

Measuring with two sets of sensors from different angles, more reliably and more accurately... The pinnacle of ultrasonic time-difference flow meters that meets the advanced demands of our customers!

**Features** ■Measurement Principle When ultrasonic waves propagate through a liquid, if there is a flow, the propagation time changes compared to a stationary state. The amount of change is proportional to the fluid's velocity. ■High Reliability The two-path method (2-pass method) ultrasonic time-difference flowmeter measures the piping of the target at two points. It employs completely independent circuits for each path, achieving high reliability. ■High Accuracy Each circuit is equipped with a high-performance DSP processor. Independent calculations are performed for each path, and flow rate is displayed through an aggregation circuit. This allows for highly accurate measurements. ■Stable Measurement Two-path measurement enables consistently stable measurements. Since the two sensors detect flow velocity at different angles, they are less affected by disturbances in flow velocity distribution, allowing for stable measurements at all times. ■Robust and Durable The transducer body uses a sturdy steel case with a thickness of 2.3mm and has a protection rating of IP54, ensuring safe use even in harsh environments. *For specifications and other details, please request materials or view them via download.*

The sensor and converter are integrated and ultra-compact! Compliant with IP67, it is resistant to noise and prevents failures.

Power Supply: 24VDC Output: PNP output Current Consumption: 70mA Withstand Pressure: 10MPa Flow Rate Range: Water 1 to 150 cm/s, Oil 3 to 300 cm/s *For detailed specifications, please refer to the catalog. Feel free to contact us with any inquiries.

A flow meter developed for measuring very small flow rates!

【Features】 800 Series - Hall effect sensor - Paddlewheel flow meter for low flow rates - Hose connection φ8mm/12mm - Accuracy ±1.5–2% FS (water calibrated) 900, 1000 Series - Hall effect sensor - Paddlewheel flow meter for low flow rates - Body materials available in PVDF and SUS316 - Accuracy ±1–2% FS (water calibrated) *For other specifications, please request documentation or view it via "Download."

Wide compatibility for micro flow in food, pharmaceuticals, semiconductors, and more! This is TITAN's state-of-the-art flow meter, equipped with the latest technology.

【Features】 ■ The main body is made of PEEK material, which has excellent corrosion resistance. It eliminates waste and, while maintaining a simple structure, achieves a high level of usability and expandability. ■ It stands independently, allowing for smart cable management. A stand is included. ■ The included USB flash drive contains dedicated software that allows for various parameter changes. It can be easily installed on a Windows computer. ■ The "atrato" is simply constructed around the main unit with various parts. Its simplicity results in fewer mechanical troubles and failures, ensuring stable performance. * For specifications and other details, please request materials or view them via download.

A lightweight and compact electromagnetic flow meter with a resin body! Two types of power supply are available: DC power and battery.

【Features】 ■ Achieves high precision despite a short straight pipe length ■ Retains cumulative values and set parameters up to the moment of battery depletion or power outage ■ Comes with an LCD display protective cover ■ Clamp-on connection allows for flexible connection configurations ■ Lightweight and compact with a polypropylene body ■ Built-in grounding electrode ■ NEMA4x structure allows for outdoor installation * For other specifications, please request materials or view them via download.

Resin-made flow meter with excellent durability and maintenance.

【Features】 ■Wide range ability of 100:1 ■Measurable from 0.2L/min ■High precision: FS ±1% ■Uses ruby for bearings ■Easily replaceable detachable sensor ■Easy replacement of the impeller ■Available in corrosion-resistant polypropylene 'SPX' (and PTFE 'SPT'). *For other specifications, please request materials or view them in the "Download" section.

Insertion type paddle wheel flow meter!

【Overview Specifications】 ■ Minimal pressure loss ■ Compatible with up to 300A ■ Achieves a wide range ability of 100:1 ■ Uses tungsten carbide for the shift and ruby/sapphire for the bearings, providing excellent wear resistance and high reliability even in low flow rate ranges. ■ Flow rate range of 0.09 to 9 m/s ■ Rich variety of wetted materials available to accommodate various applications *For other specifications, please request materials or view them via download.

A flow meter with excellent maintainability!

【Outline Specifications】 Compatible pipe diameter: 25A to 1200A (varies by type) Conductivity: 20μS/cm or higher Measurement flow velocity range: 0.06 to 6 m/s Pressure resistance: 1.4MPa Maximum operating temperature: 0 to 100℃ (varies by type and material) Case structure: IP67 (dustproof and drip-proof) Wetted materials: PVDF, Hastelloy C, SUS316L, FKM *For other specifications, please request materials or view them via "Download."

A flagship model of ultrasonic time-difference type that can accommodate large diameters of up to 3000mm.

【Installation Conditions】 ■ High functionality and performance! Plus, it's strong on-site with a waterproof case! ■ Just attach the sensor to the outside of the piping! (No plumbing work required) ■ No bypass pipe needed ■ Compatible with large diameters of φ3000mm ■ Can display ultrasonic signal waveforms, allowing you to check the measurement status! ■ Equipped with an interactive keypad for easy operation *Please request materials or view them via "Download" for specifications and other details.

High-spec ultrasonic flow meter that combines high precision, advanced functionality, and high reliability.

Model: SL1288i ISTT-D9000 Applicable pipe diameter: φ15 to 3000mm φ25 to 3000mm Measurement flow velocity range: 0 to ±12m/s 0 to ±12m/s Accuracy: ±0.8% F.S. ±1.0% F.S. Output: Analog output: 4 to 20mADC (MAX. 750Ω) Analog output: 4 to 20mADC Open collector pulse and alarm contact Temperature range: Main unit: -10 to 50℃ Main unit: -20 to 60℃ Detector: -40 to 80℃ Detector: -30 to 80℃ Display: 3.5-inch color display LCD (instantaneous flow rate / instantaneous total) Keypad: 23-key touch type 16-key interactive Protection structure: Main unit: IP54 Detector: IP68 Main unit: IP65 Detector: IP68 Power supply: Rechargeable lithium battery AC90 to 245V (Charged with AC100V adapter) Option: DC10 to 36V Cable length: Standard 5m Standard 9m (up to 400m)

Ultrasonic flow meter designed for open water channels. Capable of measuring average flow velocity with high precision.

Main Features ■ It allows for easy measurement of open channels that are difficult to measure. ■ It does not require construction of channels like traditional weir or flume types. ■ It supports symmetrically shaped open channels, and if linked with a water level sensor, flow measurement is also possible. Usage Conditions ■ The cables for the converter and detector can be extended up to 350 meters using dedicated cables. ■ Water level gauges that can output 4-20 mADC types can be connected. ■ Flow measurement cannot be displayed unless the channel shape is symmetrical. *For other specifications, please request materials or view them via "Download."

Inline impeller (turbine) flow meter capable of measuring from a minimum of 10 ml/min.

【Features】 ■ Minimum flow rate: 10 mL/min and above (MODEL: 001) ■ Pressure resistance: 1.5 MPa ■ Compatible with viscosities up to 5 cP ■ Capable of measuring small flow rates of pure water and chemical solutions with excellent corrosion-resistant resin materials. *For other specifications, please request documentation or view it via "Download."

Active in various fields such as machinery, pharmaceuticals, food, semiconductors, air conditioning, industry, and processing plants! It has no moving parts and monitors with constant stable operation.

【Features】 ■ Abundant sensor materials ■ Compatible with large diameters (depending on type) ■ Capable of handling fluids containing impurities ■ Minimal pressure loss ■ Detectable at low flow rates (0.01 m/s) with a minimum flow rate of (5 cc/m) ■ Rich output options (depending on type) ■ Explosion-proof specifications (TUV98ATEX12xx) in the same series *For other specifications, please request documentation or view it via "Download."

A volumetric flow meter with an oval gear design that can accommodate special specifications, making it suitable for various fields such as food, chemicals, and petroleum products.

■Abundant achievements both domestically and internationally ■High precision and reliability achieved through a simple structure ■The gear part uses PEEK (polyether ether ketone), which has high chemical resistance and strength, and the detection magnet employs a special ceramic magnet. ■The main case can be selected from three types: SUS316, aluminum, and PEEK, according to the application. *For other specifications, please request materials or view them via "Download."

You can directly connect the flow meter and the indicator! It is calibrated with oil of 21 cSt as standard.

【Specifications】 ○ Power Supply: 12-32VDC ○ Ambient Temperature: 5-45℃ ○ Compatible Fluids: Oil, fuel, glycol aqueous solution, water/oil emulsion ○ Fluid Temperature: 5-90℃ ○ Accuracy → Except for CT15: 15-100% = ±1% RD, below 15% = ±1% FS → CT15: ±1% FS ○ Output: Analog 4-20mADC/0-5VDC, or voltage pulse output ○ Response Time: 50ms + 1 cycle ○ Body Material → CT15/60/150/300/400 = High-strength aluminum 2011 T6 → CT600/800/1500 = High-strength aluminum 2014A T6 ○ Wetted Materials: Aluminum, stainless steel, EPDM gasket (optional: Viton gasket) ● For more details, please contact us or download the catalog.

A rich lineup of hydraulic system testing equipment to reduce the burden on operators!

【Lineup】 ○ Flow State Monitoring (Analog and Digital Flow Meters) ・Low Pressure Flow Meters ・Medium Pressure Flow Meters ・High Pressure Flow Meters ・FlowHUB Digital Monitoring Device ○ Diagnostic Testing Equipment (Portable Hydraulic Tester) ・Pressure Testing Kit ・Mechanical Tester ・Separate Pressure Valve ・Simple Digital Tester ・Digital Hydraulic Multimeter ・Digital Tester with Remote Input ・Digital Testing Kit (up to 1500 lpm) ・Analog Tester with Remote Input ・OEM Testing Kit ○ Diagnostic Testing Equipment (Handheld Hydraulic Data Logger and Display Device) ・Digital Pressure Gauge ・Flow Meters (SR and ID) ・Sensors (SR and ID) ・Hydraulic Data Logger (SR and ID) ○ Test Stand Equipment (Flow, Pressure, Temperature, Velocity Sensors) ・CT Flow Meter ・Pressure Transducer ・Temperature Sensor ・C2000 Hydraulic Data Acquisition System ・Velocity Sensor ・Flow Meter - Special Purpose ● For more details, please contact us or download the catalog.

A flow meter that measures the flow rate of fluid flowing inside a pipe from the outside of the pipe. It allows for flow measurement without modifying existing piping!

【Features】 ■ High functionality and performance! Plus, it's strong on-site with a waterproof case! ■ Simply attach the sensor to the outside of the pipe! (No plumbing work required) ■ No bypass pipe needed ■ Compatible with large diameters of φ3000mm! ■ Displays ultrasonic signal waveforms, allowing you to check the measurement status! ■ Equipped with an interactive keypad for easy operation * For specifications and other details, please request materials or view them via download.

Flow inside the piping can be measured from the outside of the piping!

【Specifications】 Flow range: ±0 to 12 m/s Pipe inner diameter input range: φ25 to 3000 mm Accuracy: ±1.0% FS or ±0.0186 m/s Linearity/Reproducibility: Temperature resistance sensor (PT100Ω) ×2 *For other specifications, please request materials or view them via "Download."

An analog output anemometer. One model can accommodate many piping systems with an insertion type!

【Features】 ■Low price ■No moving parts, making it less prone to malfunction ■Sensor head made of SUS, which is resistant to impact ■Low pressure loss *For other specifications, please request materials or view them via "Download."

Compact-sized electromagnetic flow meter with integrated display, available in two types: 0-40L/min and 0.2-80L/min.

【Features】 ● Capable of measuring micro flow rates ● Abundant output variations ● No moving parts for stable measurements ● Compact and lightweight, ideal for equipment ● Uses SUS316 and PVDF for wetted materials ● Built-in LED display for instant flow rate confirmation ● Easy setup with three buttons *For other specifications, please request materials or view them via download.*

A next-generation ultrasonic flow meter that balances ease of use and high specifications!

Model: SL1168P SL1168 Applicable pipe diameter: φ25 to 1200mm φ15 to 500mm Measurement flow velocity range: 0 to ±12m/s 0 to ±12m/s Accuracy: ±1.5% F.S. / ±1.5% F.S. Output: Analog output: 4 to 20mADC (MAX. 750Ω) Analog output: 4 to 20mADC Pulse output: Open collector Temperature range: Body: -10 to 60℃ Detector: -30 to 80℃ Body: -30 to 60℃ Detector: -30 to 80℃ Display: LCD (instantaneous flow rate / instantaneous total) LCD (instantaneous flow rate / instantaneous total) Keypad: 23-key interactive 16-key interactive Protection structure: Body: IP54 Detector: IP67 / Body: IP65 Detector: IP68 Power supply: 100VAC (±10%) 50/60Hz Lithium battery rechargeable / 10 to 36VDC Power consumption below 10W Cable length: Standard 5m Standard 9m *1 Regarding the measurement of oil and chemicals There are fluids that cannot be measured (such as those with high viscosity that do not transmit ultrasonic waves) in oils and chemicals. Please conduct a demonstration at the planned installation location, piping, and measurement fluid in advance to confirm that accurate measurements can be made.

Only carefully selected high-performance, high-quality items. Of course, after-sales support is also thorough.

<Inline Type Flow Controller Series> 【Specifications】 <Measured Fluid> Water, Glycol (0, 5, .... 25, 30%) (SDN552/4GAA is for water only) <Power Supply> DC24V ±10% <Power Consumption> 100mA <Ambient Temperature> 0–60℃ <Fluid Temperature> -10–+90℃ (SDN552/4GAA is 0–+90℃) <Temperature Gradient> 400K/min <Maximum Operating Pressure> 2MPa <Resistance Load> 200–500Ω (Analog Output) <Switching Current> 100mA (PNP Output) <Standby Time> 6–10s (PNP Output) <Reaction Time> 1–8s (NPN Output) <Temperature Control Range> -10–+90℃ (SDN552/4GAA is 0–+90℃) <Protection Rating> IP65 <Wiring Connection> M12 Connector <Material> Housing: PBT Sensor: SUS316Ti/FKM *For other specifications, please request materials or view them via "Download."

Analog output liquid flow sensor. It has many advantages in maintenance due to the absence of a drive unit.

【Features】 ■Low price ■Less prone to malfunction due to no moving parts ■Insertable type, compatible with piping of 15A or more with a single model ■Extremely low pressure loss ■Capable of measuring drainage, sewage, and slurry liquids *For other specifications, please request materials or view them via "Download."

This is a low-cost type flow meter/flow indicator composed of a low-cost diesel flow meter and a battery-operated instantaneous and cumulative flow indicator.

【Features】 ■ Extensive track record both domestically and internationally ■ Achieves high precision and high reliability through a simple structure ■ The gear components use PEEK (polyether ether ketone), which has high chemical resistance and strength, while the detection magnets utilize special ceramic magnets. ■ The main case can be selected from three types: SUS316, aluminum, and PEEK, depending on the application. *For other specifications, please request materials or view them via download.

Insertion-type electromagnetic flow meter EX series and impeller flow meter IP series compatible options.

【Published Content】 ■AO55 EX Series / IP Series ■FT420 EX Series / IP Series ■FT415 IP Series (for Micro Power) For specifications and other details, please request materials or view them via "Download."