We handle primary lithium batteries manufactured by EVE Energy. In addition to Li-SOCl2 batteries (lithium thionyl chloride) and Li-MnO2 batteries (lithium manganese dioxide), we offer a wide range of products including battery capacitors (SPC) that provide instantaneous high current, as well as ER+SPC solutions that combine primary batteries and capacitors. The nominal voltage for all of them is 3.6V. 【Applications】 - Smart meters - IoT devices, security devices, etc. Since specifications vary by model number, please let us know your application and usage environment, and we will suggest a model number that meets your requirements. For specific specifications, please refer to the manufacturer's datasheet.

We handle TFT LCD modules from WINSTAR for use in display sections of devices. 【We receive inquiries in the following situations】 - Wanting to update the display section of measuring instruments or control panels - Looking for LCDs to incorporate into industrial equipment - Searching for a supplier that can accommodate small quantities 【We can assist with】 - Selecting sizes and interfaces that meet application and enclosure conditions - Confirming pin assignments and arranging samples - Developing custom products and embedded systems - Selling in small lots We also handle OLED (organic EL) modules from the same WINSTAR company. Please consider these as well for devices that want to take advantage of their thinness, low power consumption, and wide viewing angles. Please check the specific specifications in the manufacturer's datasheet. We also accept requests for quotes only.

We are accepting inquiries for demonstrations and on-site evaluations of the non-camera monitoring sensor "MotionCatch" for owners and management companies of senior housing, service-equipped senior housing, and rental apartments. 【We can assist with the following inquiries】 - I want to establish a system for checking the safety of single residents. - I want a mechanism to be alerted when there is "no movement for an extended period." - I don't want to install cameras, but I want to understand the situation in the living space. 【Features of MotionCatch】 - Detects human movement non-contact using millimeter-wave radar and AI. - No cameras used and no video recording. It respects the privacy of residents. - Simply install on walls or ceilings. No wiring work is required (USB power supply and Wi-Fi). - Notifications of detected information are sent to the management company's PC or smartphone. - The detection range of one unit is approximately 6m x 4m, making it suitable for monitoring on a "room-by-room" basis rather than the entire floor. We accept inquiries for retrofitting existing properties, confirming installation conditions, and trial implementations (PoC). *No video is recorded. This is a product to support monitoring and is not a medical device.

We handle EEMB's 3.7V high-capacity lithium polymer batteries (Li-Po). With high energy density, they can secure a lot of power even in limited spaces, and their thin and lightweight pouch structure enhances design flexibility for devices. In addition to our standard lineup, we also accommodate custom dimensions and shapes, as well as custom designs for battery packs. 【Applications】 - Smartphones, tablets - Medical devices, card readers - Control devices, smartwatches - Power tools, IoT devices, etc. The nominal voltage is 3.7V. We have obtained various safety standards and certifications such as UN38.3 (transport), IEC/EN62133, UL1642, PSE, CE, KC, ISO9001/14001, and REACH (the applicable scope varies by product). If you let us know your intended use and environment, we can suggest specifications that meet your requirements.

There is an option for an OLED (Organic EL) module in the display section of industrial equipment. Our company handles OLED modules manufactured by WINSTAR. 【Suitable Devices】 - Devices that require a slim casing - Devices powered by batteries or designed for low power consumption - Operation panels that are often viewed from an angle - Measuring instruments or control panels used in dark environments You can directly utilize the features of OLED, such as thinness, low power consumption, and wide viewing angles, in your device design. 【Product Lineup】 In addition to standard graphic and character display products, we offer knob-type models that can be intuitively operated with a knob, mirror-finish covers, wide and bar types, models with boards, and touch panels. We also handle TFT LCD modules. We can accommodate custom products and embedded system development, and we welcome inquiries for small lot orders. We can assist with pin assignments and sample arrangements, so please feel free to contact us. For specific specifications, please refer to the manufacturer's specification sheet.

We would like to introduce MotionCatch as a monitoring sensor that can be used to understand office occupancy. Using millimeter-wave radar and AI, it non-contactly detects human movement and occupancy status. Since it does not use a camera and does not record images, it can be considered for installation in places where cameras are difficult to place, such as conference rooms, private rooms, and work areas. 【Suitable for the following situations】 - Understanding whether conference rooms are actually in use - Monitoring occupancy and absence in private rooms and work areas - Checking if absences are prolonged It can be installed on walls or ceilings and has a design that easily blends into existing spaces. Product materials and a comparison table of monitoring sensors can be downloaded from the related catalog below. We also welcome inquiries regarding the conditions for rooms where installation is possible and the number of units, so please feel free to contact us.

We have started accepting inquiries for demonstrations and on-site evaluations of the non-contact, camera-less monitoring sensor "MotionCatch" for factory and worksite break rooms, overnight rooms, and solo workspaces. **Features of MotionCatch:** - Detects human movement non-contact using millimeter-wave radar and AI. - No cameras used and zero video recording. Provides privacy-conscious monitoring. - Palm-sized. Simply install on walls or ceilings without the need for wiring (USB powered, Wi-Fi). - The detection range of one unit is approximately 6m x 4m. It is suitable for monitoring "room units" rather than entire floors. We envision installation in rooms where placing cameras is difficult, such as break rooms, rest areas, overnight rooms, and solo workspaces. We are accepting inquiries for demo units, on-site evaluations, and confirmation of installation conditions. *Note: No video is recorded. This product is designed to assist monitoring and is not a medical device.*

We have published a technical column titled "How to Choose ToF and 3D Sensors" as a downloadable document (A4, 4 pages, with illustrations). You can view it from the related catalog below. 【For those who】 - Are considering 3D sensors for the first time - Want to clarify the differences between ToF, stereo cameras, and LiDAR - Want to determine if 3D can be used for appearance inspection 【Content of the document】 - Comparison of the mechanisms of the three methods with diagrams / Quick reference table for differences between methods - How to choose based on applications (want to count people / want to measure distance / want to inspect shapes / want to use outdoors) - Suitable and unsuitable targets for 3D in appearance inspection - Three common mistakes / Five items to check during selection We offer rental of demo units of the 3D ToF cameras from meere company. Please let us know the target objects, installation distance, and usage environment.

We have published two application pages for the non-contact, camera-less monitoring sensor "MotionCatch." You can view them from the related products section below. 【Published Pages】 - MotionCatch | Non-contact monitoring sensor for public facilities SE - MotionCatch | Smart home monitoring sensor SE 【Features of MotionCatch】 - Detects human movement non-contact using millimeter-wave radar and AI. - No cameras used and no video recording. Provides monitoring with consideration for privacy. - Palm-sized. Simply install on walls or ceilings without the need for wiring (USB powered, Wi-Fi). - The detection range of one unit is approximately 6m x 4m. It is suitable for monitoring "by room" rather than the entire floor. We are accepting inquiries regarding installation conditions and trial implementations (PoC). *No video is recorded. This is a product designed to assist monitoring and is not a medical device.

We are accepting inquiries regarding samples and specifications of lithium thionyl chloride primary batteries (ER batteries). Please consider them as a power source for devices you want to use without maintenance for a long time. 【Applications】 - Smart meters, gas and water meters (operating for a long time without battery replacement) - IoT sensors, asset tracking and location devices - Disaster prevention and security equipment, industrial measurement and recording devices 【Features of ER Batteries】 - Nominal 3.6V primary battery (non-rechargeable type) - High energy density, compact size, and long lifespan - Wide operating temperature range and low self-discharge suitable for long-term storage Please let us know your application and usage environment (temperature, current, expected lifespan). We will suggest model numbers that meet your conditions. For detailed specifications, please refer to the related product page below.

We are accepting requests for the loan of a 3D ToF camera demo unit. You can verify points that are difficult to understand from the catalog numbers in an actual field setting. 【What you can confirm with the demo unit】 - Measurable distances and field of view (for consideration of installation positions) - The impact of environmental factors such as outdoor light and backlighting on visibility - Suitability for applications such as human detection, camera replacement, and dimension measurement 【For considerations like these】 - I want to compare it with other methods such as LiDAR and stereo cameras - I want to evaluate in advance whether it can be integrated into AGVs or automation devices - I want to confirm its effectiveness before implementation to reduce risks We also accept inquiries about NDA agreements and trial implementations (PoC). Please let us know your intended use, and we will suggest models that fit your installation conditions. For detailed specifications, please refer to the related products and catalogs below.

We are accepting inquiries for demonstrations and on-site evaluations of Motion Catch (a non-contact, camera-free monitoring sensor). It detects the state of a person using millimeter-wave sensors and AI. Since it does not capture images, it can be installed with consideration for privacy. 【Locations we are accepting inquiries for】 - For awareness in case of emergencies in restrooms and changing rooms (care, welfare, public facilities) - For safety monitoring during solo work and in offices in factories and businesses - For locations that want to avoid cameras but need to monitor occupancy, entry/exit, and getting out of bed 【Process from inquiry to evaluation】 - We will propose the feasibility of installation based on drawings and site conditions. - You can also inquire about operational checks with demo units or trial installations. For detailed specifications, please refer to the related products and catalog below. We welcome inquiries regarding applications as well. *This product is intended for monitoring support (not a medical device).