アイ・ティー・エス・ジャパン Official site

Easy MI value measurement! For quality control of materials. We also accept demo measurements and contract testing.

【Specifications (Partial)】 ■ Temperature control range: Type B 50–320℃, Type C 50–400℃ (optional) ■ Timer accuracy: ±0.01 seconds ■ Piston weight: 100g ■ Automatic cut: Selectable from 1 to 300 seconds ■ Barrel dimensions: 9.55mm ±0.01mm ■ Diamond die dimensions: 2.095mm ±0.005mm 【Applicable Test Standards】 ■ JIS K7210 ■ ASTM D1238 ■ ASTM D3364 ■ ISO 1133 ■ GB/T 3682 【About I.T.S. Japan】 ■ We promise service and support comparable to domestic manufacturers for excellent testing machines, measuring instruments, and production rationalization equipment from overseas. ■ We provide support for all products sold, similar to domestic manufacturers. ■ With cooperation from manufacturing companies, we perform repairs and maintenance in-house, allowing for prompt responses. ■ We keep stock of easily breakable parts domestically. ■ If specialized technicians are needed, we can invite dedicated staff from the manufacturing company for repairs. *For more details, please refer to the PDF document or feel free to contact us.

Achieves highly reproducible measurements of corrected accurate shear viscosity. Provides a new indicator for material design.

【Features】 ○ Revolutionary twin capillary method ○ Evaluation of processability by elongational viscosity ○ High measurement reproducibility ○ Latest motor control and extensive shear rates ○ Excellent control technology ○ Touch panel that consolidates functions ○ Pressure balance detection function ○ Database function ○ Rheology calculator ● For more details, please contact us or refer to the catalog.

Developed by the world-renowned authority "Dr. Bill Check Engineering." It is a simple analysis software that integrates pre- and post-processing, specializing in "optimal design" and "stable molding."

■ Easy to operate even for beginners, yet capable of high-speed calculations. ■ Fast calculations! Significant reduction in time and costs is possible. ■ An immediate tool that clearly identifies problem areas of molding defects. ■ Capable of analyzing the transition of pellets from solid to molten within the extruder. ■ Supports measurements! Provides all the viscosity data necessary for analysis. ■ Flexible support for die shapes, including import from CAD and input from drawings. ■ Basis for simulation accuracy.

The melting process of pellets, which can be a cause of trouble, can also be simulated.

【Features】 ○ Evaluation of melting suitability is possible with the unique parameters of Compuplast Co. ○ A wide variety of mixing element patterns are available. Custom solutions for special mixers are also supported. ○ Compatible with worn flights, notches, and grooved barrels. ● For more details, please contact us or refer to the catalog.

High-precision simulation of complex extrusion molds that are difficult to simulate is possible.

【Features】 ○ Capable of designing molds that enable stable extrusion under a wide range of conditions using a unique "Cross Flow Minimization Method." ○ Total analysis of profile extrusion in combination with cooling modules. ○ Import and export of molds in DXF format is possible. ● For more details, please contact us or refer to the catalog.

Specialized in measuring the moisture content of polymers! Used in various manufacturing processes of recycled plastics!

【Set Contents】 ■ Aqua Track V main unit × 1 ■ Instruction manual (English/Japanese) × 1 each ■ Sample container × 1 ■ Power cable × 1 ■ Reagent tray × 1 ■ Reagent (calcium hydride 250g) × 1 ■ Reagent measuring spoon × 1 ■ Cleaning brush × 1 ■ Sample container removal scissors (tongs) × 1 *For more details, please refer to the PDF document or feel free to contact us.

The world's first simulation software capable of overall analysis of all co-rotating twin-screw extruders.

【Other Features】 - With a unique 3-axis graph display function and an intuitively easy-to-use screen interface, practical simulations can be performed without relying on extravagant visuals. - For screw shape input, simply select the number of bars and the kneading pattern from templates and specify the dimensions. - With a unique input method, even beginners can easily enter data. *For more details, please refer to the related links or feel free to contact us.

Since maintenance costs are close to zero, reduce the running costs of material drying!

【Features】 ◎ Maintenance costs are nearly zero, allowing for a reduction in material drying costs! ◎ Can be directly mounted on molding machines. ◎ Incorporates various ideas to prevent bridging. ○ Simple structure: A straightforward and efficient drying method using compressed air. ○ Suitable for all resin materials. ○ Maintenance-free & 3-year warranty. ○ Accommodates various conditions: - Hopper and internal piping made of corrosion-resistant stainless steel. - High-insulation hopper up to 200 degrees. - Compact design that does not require a specific installation location. - Materials can be transported using a loader, and it can also be directly mounted on molding machines. ○ Ecology: No consumables used for drying, resulting in zero waste. ● For more details, please contact us or refer to the catalog.

Improve the quality of molded products and shorten the cooling cycle!

【Features】 ○ Achieves a reduction in cooling time during blow molding! ○ Stably generates cooled compressed air ○ Operates with low running costs and is maintenance-free! ● For more details, please contact us or refer to the catalog.

Dry air is supplied to the sealed injection molding line to prevent condensation on the mold.

◎Maintains the same dew point temperature around the mold in any season! ◎No need for humidity control throughout the factory! A device that is gentle on both staff and costs! ◎Low running costs due to a drying method that does not use dehumidifying materials! ◎Surrounding the mold with a cover shuts out dust and other contaminants! ◎Operates maintenance-free using a drying method that does not use dehumidifying materials.

Wide-ranging support from direct blow to injection and stretch blow. Time-dependent deformation is also reproduced with high precision using the K-BKZ model.

【Features】 ○ Import mold shapes from STL, DXF, Patran, and VRML files. ○ Material slip due to differences in mold materials is reproduced based on the friction coefficient. ○ The material model employs integral-type viscoelastic models K-BKZ and Leonov. ○ Accurately simulates time dependence and large deformations, with high precision in reproducing sagging of sheets and parisons. ○ Physical property data for major materials is already registered, allowing for immediate analysis. ○ Three different damping functions to accommodate strain hardening. ○ Adopts the WLF temperature dependence model. ○ Achieves short computation times through a multi-threaded solver and batch analysis system compatible with 64-bit parallel processors. ○ Displays post-molding thickness, temperature, stress, and elongation rate in detailed graphs using 3D color scales and arbitrary cut lines. ○ Predicts molding defects and their risks through contact conditions between the mold and sheet, highlighting large deformations of the sheet, and weight calculation functions for arbitrary parts. ○ Analysis results can be exported to ANSYS, IGES, DXF, Cosmos/M, Patran, and LS-Dyna files for structural analysis. ● For more details, please contact us or refer to the catalog.

We visit clients who are utilizing the AquaTrack series to publish their usage status and interviews about AquaTrack.

◎ Portable high-precision moisture meter for polymers. High-tech polymers such as PET, PC, and PA6 have their moisture content in pellets significantly affecting the molding of the products. Since the moisture content in pellets is minimal, there were limited methods for high-precision measurement, but the AquaTrack 3E achieves high precision equivalent to the Karl Fischer method with its unique measurement technique. Furthermore, it does not require large equipment like nitrogen, so moisture measurement on-site is possible with just a 100V power supply. Handling and disposal of reagents are also easy. The moisture meter "AquaTrack 3E," specialized for measuring the moisture content of polymers, is widely used in the plastic molding industry. ◎ Since it has a relatively large test tube, it can also measure molded products. Measuring moisture after product molding is also a very important factor. With the AquaTrack 3E, as long as the size fits in the test tube, it can be measured directly. This includes PET bottles, cases, films, connectors, CDs, capacitors, etc. Additionally, even larger molded products can be measured if they are cut to a size that fits in the container.

Providing top-tier rheology equipment, rationalization devices, and CAE programs in the world.

**Main Product Contents** ○ Melt Property Material Development Equipment R6000 Measures corrected true shear viscosity and elongational viscosity, providing new indicators for material design. ○ Flow Analysis Software Virtual Extrusion Lab Series The shortest route to optimal design. Simulation software that visualizes trouble prevention and countermeasures. ○ Dynamic Viscoelasticity Device (Solid) Iplexer Series High-precision, high-power viscoelastic measurements produced by two motors. ○ Instrumented Impact Testing Machine I.M Series Captures the essence of impact characteristics. ○ Temperature Scanning Non-Isothermal Stress Relaxation Measurement Device TSSR Meter Enables new analysis of resins and elastomers through stress relaxation measurement. Numerous other products available. ● For more details, please contact us or download the catalog.