Update: Collection of Case Studies on JIS Z 0202 Drop Tests

日本ビジネスロジスティクス（JBL）藤沢北事業所

We have updated the collection of examples for images and detailed descriptions of JIS Z 0202. Please refer to the related link "JIS Z 0202 Drop Test." Overview of JIS Z 0202 Testing: This is a standard that specifies the drop test method. The testing methods include three types: "vertical free fall test" using a free fall testing machine, "equivalent drop test" using an equivalent drop testing machine, and "one-sided support drop test" using a crane.

Date and time
Capital
Entry fee

Related product information

[Test Case] JIS Z 0232 Vibration Test
The selection will be made with reference to the general provisions of JIS Z 0200 regarding test levels and vibration duration.

▼ For more details, please download the PDF document (recommended). ▼ If you are in a hurry, please contact us using the 'Contact Us' section below.
[Test Case] JIS Z 0202 Drop Test
It is also possible to capture the behavior of the product and the deformation of the cushioning packaging in as little as 1/2000 of a second for visual confirmation through video.

[Drop Direction and Drop Count] ◇ Vertical Free Fall Test and Equivalent Drop Test: Conducted drop tests from 1 corner, 3 edges, and 6 surfaces (total: 10 times). ◇ Single Support Edge Drop Test: Supported on a platform 15 cm high, conducted drop tests twice on the opposite edge (total: 4 times).
[Test Case] JIS Z 0212 Compression Test
We conduct over 300 transportation tests annually. We provide consistent support from the planning of the tests to the preparation of the test reports.

【Compression Test Method】 ■Testing according to JIS Z 0212 ・Method A: Apply the determined compression load to the test sample and examine for damage to the contents. ・Method B: Conduct a compression test on an empty container to determine the compression strength of the container itself. ■Provisions of Appendix of JIS Z 0212 ・Stacking Load Test: Apply the determined compression load to the test sample for 24 hours and examine for damage to the packaging and contents.
[Test Case] JIS Z 0205 Horizontal Impact Test
The testing method applies an inclined surface test using an inclined impact testing machine.

【One Point Advice】 You can install an acceleration pickup sensor on the product to measure the impact value during a drop, and by using a high-speed camera, it is also possible to capture the behavior of the packaged product and the deformation of the cushioning packaging during the drop impact at a maximum of 1/2000 seconds, allowing for visual confirmation through video.
JIS Z 0200 Packaging of Goods - General Principles for Performance Testing Methods
Based on the content of ISO 4180, this is a testing method for evaluating the packaging of packaged goods against vibrations, drop impacts, and compression during the distribution process.

- In the main body, the test sequence consists of "vibration test, drop test, and compression test with separate test samples," while in the appendix, the basic test sequence is composed of four tests: pre-treatment, drop, vibration, and compression tests. - The strength levels of the tests are classified into levels 1 to 3.