Announcement of the development of the "DT Series" stack height 30mm type with a floating amount of ±1.0mm, which is twice that of conventional models!

KEL

We have developed a 30mm stack height type of the high-speed transmission compatible 0.5mm pitch floating connector "DT Series." Previously, the stack height of the DT Series was adjusted on the plug side, but this time we have developed a type that raises the stack height on the receptacle side by 10mm. By combining it with the 20mm stack height type on the plug side, we achieve a stack height of 30mm. As a feature of the 10mm raised stack height type, the floating amount (movable amount) has been increased to ±1.0mm, which is double the ±0.5mm of the conventional products in the XY direction. While the floating amount has increased, the board footprint has been reduced by 8% compared to conventional products. It also supports high-speed transmission, enabling high-speed serial transmission equivalent to 8Gbps. The stack height variations can accommodate eight different stack heights ranging from 18mm to 30mm by fitting with the existing plug side. There are seven types of pin counts available, ranging from 30 pins to 140 pins.

Date and time
Capital
Entry fee

Related product information

What is a floating connector?
Not only can it absorb positional misalignment during fitting, but it can also accommodate positional misalignment after fitting due to rotation from tightening screws!

【Lineup】 ■ DY Series 0.5mm Pitch Floating Amount XY Direction ±0.5mm - Standard for floating connectors - Wide variety of pin counts and stack heights ■ DT Series 0.5mm Pitch Floating Amount XY Direction ±0.5mm - Supports high-speed transmission (meets SATA Rev.3.0 specification requirements) - Available in multi-pole (up to 240 poles) and high stack (maximum stack height of 20mm) ■ DU Series 0.4mm Pitch Floating Amount XY Direction ±0.4mm - Compact due to narrow pitch, reducing PCB footprint - Available in multi-pole (up to 200 poles) *For more details, please refer to the PDF document or feel free to contact us.
Floating Connector Brochure
The connector's connection part is movable to absorb stress! It is widely used in both industrial and consumer equipment.

【Lineup】 ■DT Series 　・High-speed transmission compatible 0.5mm pitch floating connector ■DY Series 　・0.5mm pitch floating connector ■DU Series 　・0.4mm pitch floating connector ■DW Series 　・0.635mm pitch floating connector *For more details, please refer to the PDF document or feel free to contact us.
0.5mm pitch floating connector "DT Series"
Stack height 25mm! We have developed additional variations of the high stack type.

【Specifications】 ■Insulator Material: LCP (glass fiber reinforced) UL94V-0, black ■Contact Material: Copper alloy ■Contact Finish: Nickel-plated base, gold-plated finish ■Mounting Bracket Material: Copper alloy ■Mounting Bracket Finish: Nickel-plated base, gold-plated finish (receptacle) Nickel-plated base, tin-plated finish (plug) ■Dust Tape Material: Polyimide ■Rated Current: 0.4A per terminal ■Contact Resistance: 80 mΩ or less ■Dielectric Strength: AC200V, 1 minute ■Insulation Resistance: DC250V, 100MΩ or more ■Operating Temperature Range: -40℃ to +105℃ *For more details, please refer to the PDF document or feel free to contact us.
5.0mm pitch waterproof connector "FW Series"
Achieving improved workability! The true strike zone created by gender-neutral terminals that are compact and waterproof.

【Lineup】 ■Cable relay connectors (2, 3, 4 poles) ■Cable relay connectors, branching and relay type (2, 3, 4 poles) *For more details, please refer to the PDF document or feel free to contact us.
0.55mm High-Performance Coaxial Harness "TSL Series"
A single harness can achieve a transmission speed of 320 Gbps! Noise reduction is enhanced with a multi-point ground mechanism and a metal shell cover.

【Other Features】 ■ Enhanced noise prevention through a structure that encloses the entire connector with a multi-point grounding mechanism and a metal shell cover. ■ Achieves low loss and low skew when combined with Tokyo Special Cable Co., Ltd.'s high-performance coaxial cable "RUOTA." * "RUOTA" is a registered trademark of Tokyo Special Cable Co., Ltd. Registration No. 5594596. ■ Adopts a locking structure with a good tactile feedback. ■ A pull tape is provided on the connector, allowing for easy and reliable unlocking of the connector by simply pulling the tape, enabling straightforward removal. ■ Supports horizontal and vertical connection methods. * For more details, please refer to the external link page or feel free to contact us.