マーポス Official site

Expanding the measurement area while maintaining top-class repeatability and measurement performance. Ideal for measuring grinding tools and special-shaped tools, as well as wear management.

【Specifications (Partial)】 ■ Shutter operation: Air-driven ■ Measurable diameter (for VTS WF-85) ・ min: 40μm ・ max: 2.9mm double side / 80mm single side ■ Resolution: 0.4μm ■ Relative humidity: 90% max ■ Protection rating (IEC 60529): IP67 * For more details, please refer to the PDF document or feel free to contact us. ------- ● Exhibition Participation Announcement MECT 2025 (Mechatrotech) @ Port Messe Nagoya (Hall 3, Booth No.: 3D49) We will be exhibiting at "MECT 2025" for four days from October 22 (Wednesday) to October 25 (Saturday), 2025. We will introduce the VTS, a non-contact tool measurement device equipped with a CCD camera and a new feature "Tool Surface Wear Inspection Function." We look forward to seeing you at our booth.

Elimination of various signal noises through ultra-wideband (UWB) transmission technology. The antenna unit features an ultra-compact design.

For more details, please refer to the PDF document or feel free to contact us.

When a collision occurs, the stop signal is activated within 1 ms! It minimizes damage as much as possible.

【Other Features】 ■ Capable of operating multiple machines and can run machines unattended ■ Easy retrofitting, compatible with various types of machines and controls ■ Protection possible from the first workpiece: no learning required ■ Records stop event data (data, time, related values) and allows for analysis ■ Records process flow (can be exported as a CSV file) ■ Compact control cabinet module *For more details, please refer to the PDF document or feel free to contact us.

It will contribute to cost reduction, allowing resources to be allocated to more important issues!

【Other Listings】 ■GENIOR MODULAR Active Machine Protection/Collision Detection ■Machine Condition Based on Vibration/Distance Monitoring and Diagnosis ■C-THRU4.0 Data Management ■Evaluation of Artist Monitoring Data through Software Modules *For more details, please refer to the PDF document or feel free to contact us.

The display format is simple and easy to operate! You can create programs for the operating cycle in an interactive format.

【Other Features】 ■ Consolidates all machine tool monitoring/process control applications into a single system, equipped with superior functionality. ■ Functional nodes form a unique network using a single bus managed by the master node. ■ Modules and connecting components are designed to withstand harsh machining environments. ■ Guarantees overall mechanical reliability. ■ Each module has a compact design, making installation easy both inside and outside the work area. ■ The operational logic is designed to be usable in various operational modes. *For more details, please refer to the PDF materials or feel free to contact us.

For industrial machinery! A wide range of solutions designed for use with various types of equipment.

【Other Listings】 ■ AE Node ■ ACC Node ■ WBTX Node ■ PROXI Node ■ TOUCH Node ■ Operator Panel ■ BLU HMI ■ Widget ■ Software Cycle *For more details, please refer to the PDF document or feel free to contact us.

It is possible to measure various diameters within the set measurement range! No special zero setting is required.

【Other Features】 - During the grinding process, the nominal value of the master obtained during zero setting is used as the reference value. - There is no need to use a master work for each cutting diameter. - The diameter measurement value is obtained by summing the value detected by the measurement cell and the value from the optical transducer position inside the measurement head. - During machining, the approach speed of the measurement cell is adjusted according to the detected amount of material removal. - The required contact between the measurement contact and the workpiece is always guaranteed. - The measurement cell is protected from the risk of collision that may occur in the case of intermittent surfaces. *For more details, please refer to the related link page or feel free to contact us.

High-speed measurement suitable for 100% inspection! It is possible to correlate EOL test equipment and data.

【Device Specifications (Excerpt)】 ■Power Consumption: 10kW ■Power Supply: 50Hz～400V (3+N) ■Maximum Power: 50kVA ■Device Dimensions: 3600mm (L) × 2500mm (W) × 2800mm (H) ■Loading Height: 1127mm ■Maximum Gear Width: 70mm ■Part Loading Method: Manual/Automatic *For more details, please refer to the PDF document or feel free to contact us.

Analog and digital versions are available. Supports excellent measurement with a simple setup.

Storage case: Aluminum Protection rating: IP54 (front panel) Touchscreen: Capacitive LCD display: 10.1 inches - Aspect ratio 16:10 CPU: ARM 1600 MHz Ethernet LAN ports: 2 x 1Gbps Fieldbus interface: 2 x Ethernet type USB ports: 4 x USB 2.0 Type A Serial ports: 1 x RS232 + 1 x RS422/RS485 Storage: 4GB micro-SD card Stand: Tilt type Power supply: DC24V -15%/+20% Relative humidity: 5 to 80% (without condensation) Operating temperature: 5 to 45 ℃ Dimensions (LxHxD): 258 mm x 172 mm x 45 mm

Benchtop type! Can be used easily and quickly, reducing inspection time and improving measurement performance.

【Other Features (Excerpt)】 ■ Ultra-precision: Measurements that were previously only achievable in measurement rooms with expensive equipment and specialized staff can now be performed. ■ High flexibility allows for the measurement of various components and dimensions without system presets or remastering. ■ Suitable for offline checks of drilling tools, end mills, cutting tools, and toothed pulleys. ■ Capable of measuring the diameter, ovality, and straightness of carbide blanks, ground pins, and cylinders. *For more details, please refer to the PDF document or feel free to contact us.

Achieve high-precision non-contact measurement in seconds <Test measurement of workpieces available (please inquire)>

Measurement Range: <XS30> Length 33mm / Outer Diameter 20mm <S300> Length 300mm / Outer Diameter 60mm Maximum Component Weight: <XS30> 1.0 kg <S300> 6.0 kg Dimensions of the Measurement System (W x D x H): <XS30> 610 x 545 x 400 mm <S300> 925 x 615 x 840 mm Measurement Uncertainty: Length (mm): U95 (2+L[mm]/200) µm Outer Diameter (mm): U95 (1+D[mm]/200) µm

Display measurement results at hand! Reliable measurements can be made even in harsh field environments.

【Other Features】 ■ The wireless gauge has advantages such as no cable tangling or breakage, ergonomic ease of operation, and direct measurement on board. ■ Communication software developed by Marpos allows the i-Wave2 to be connected to commercial PCs. ■ Various mechanical gauge heads (M10, M6, and M3.5) such as plugs, snaps, and depths can be quickly attached to the handle using a dedicated adapter. ■ You can choose between standard and star lock, accommodating frequent gauge head changes. ■ Protection rating is IP67. *For more details, please refer to the PDF document or feel free to contact us.