We will hold an online seminar as follows. Do you have challenges with quality control of uniform sheet materials or films? As a new option for the development and manufacturing of films and sheet materials, we will thoroughly explain ultrasonic inline measurement as an alternative to conventional radiation measurement. We will achieve manufacturing quality through non-contact inline measurement without sampling, eliminating the hassle of regulatory compliance. We will propose new options for film production management, incorporating case studies. We sincerely look forward to your participation. Date and Time: August 5, 2026 (Wednesday) 14:00 - 15:00 Instructor: MeSys Product Specialist, Sales Development Department, Marpos Co., Ltd. Target Audience: - Customers involved in the manufacturing and research of films and sheet materials - Customers facing challenges (workload, regulations, etc.) with existing technologies used in film and sheet material production - Individuals researching and investigating new technologies to replace existing ones - Customers involved in coating films and sheets Registration: Please register through the details and registration button.

We will be holding a seminar as follows during the Next Generation Die Casting Technology Webinar Week 2026. The die casting process plays a very important role in the automotive industry today, contributing to weight reduction, strength, cooling performance, and improved production efficiency. Do you have challenges related to defective products or mold lifespan due to mold temperature management? A non-contact type mold surface temperature monitoring system can achieve stability in quality, accuracy in traceability, and cost reduction. We hope you find it useful along with case studies. Date and Time: July 6, 2026 (Monday) 13:30 - 13:55 Instructor: Product Manager, Sales Engineering Department, Marpos Co., Ltd. Target Audience: - Those involved with die casting products and die casting machines - Those facing challenges in managing mold surface temperature - Those looking to improve traceability in the die casting process - Those wanting to work on cost reduction in the die casting process Registration: Please register through the details and registration button. * An invitation code (free) is required to apply for this event. Please enter the following invitation code on the application site. Invitation Code: K3994296

We will hold an online seminar as follows. This is a practical seminar aimed at evolving monitoring systems for machine tools from "seeing" to "noticing and being able to use," in order to achieve results. We will explain the concepts of tool life management and wear monitoring, operational points after implementation, and how to utilize data for process improvement, along with customer case studies. Date and Time: August 19, 2026 (Wednesday) 14:00 - 15:00 Instructor: Engineer from the Artis Team, Sales Development Department, Marpos Co., Ltd. Target Audience: - Customers who use machine tools on a daily basis - Customers considering the introduction of monitoring systems but want to know the specific process until implementation - Customers researching the latest trends in monitoring systems for machine tools We sincerely look forward to your participation.

We will hold an online seminar as follows: What changes with the introduction of monitoring systems for machine tools? In this webinar, we will explain how to achieve efficiency improvements and preventive maintenance through visualization of processing. In addition to the introduction process and key points for internal decision-making, we will introduce success stories and firsthand accounts from domestic users, providing tips for effective utilization that leads to results. Date and Time: May 19, 2026 (Tuesday) 15:00 - 16:00 Instructor: Engineer from the Artis Team, Sales Development Department, Marpos Co., Ltd. Target Audience: - Customers who use machine tools on a daily basis - Customers considering the introduction of monitoring systems but want to know the specific process for implementation - Customers researching the latest trends in monitoring systems for machine tools We sincerely look forward to your participation.

We will hold an online seminar as follows. The corporate perspective on the introduction of monitoring systems is changing year by year. We will explain the monitoring systems for machine tools that are currently needed, using various case studies to discuss the changes in the industry environment, what challenges customers perceive, their expectations for monitoring systems, and the effects of their implementation. This seminar will provide insights into specific approaches for your company's introduction of monitoring systems. Date and Time: February 12, 2025 (Thursday) 14:00 - 15:00 Instructor: Monitoring System Representative, ARTIS (MARPOSS Corporation Sales Development Department) Target Audience: - Customers considering the introduction of monitoring systems who want to know the specific process leading to implementation. - Customers interested in what challenges other companies have identified that led to the introduction of monitoring systems. - Customers researching the latest trends in monitoring systems for machine tools. We sincerely look forward to your participation.

Thank you very much for your continued support. We, at Marpos Co., Ltd., regret to inform you that we will be closed during the following period. Closure Period: From Saturday, April 25, 2026, to Wednesday, May 6, 2025. Inquiries received during the closure period will be answered sequentially after Thursday, May 7. We apologize for any inconvenience this may cause and appreciate your understanding.

This is an introduction to a wireless touch probe system developed for customers facing issues with unstable communication due to radio wave interference in cutting processing environments. Please take a look at the article.

A new feature has been added to the non-contact imaging camera tool setter that monitors the condition of the tool's cutting edge on the machine, allowing for the analysis of the tool's condition based on the contrast of the tool's surface. Please check the article for more details.

Our company will exhibit at "SEMICON JAPAN 2025," which will be held at Tokyo Big Sight starting from December 17, 2025 (Booth Number: E4727). At this exhibition, we will introduce semiconductor industry-specific applications and non-contact measuring instruments that contribute to the reliability of semiconductor manufacturing processes and the improvement of semiconductor performance, which are continuously evolving. We warmly invite you to visit our booth and see our offerings. <Main Exhibited Products> - Visual blade inspection system for dicing processes - Non-contact high-precision thin film measurement device (interferometry technology) - Non-contact high-precision surface shape measurement device (chromatic confocal technology) - Contact/non-contact thickness measurement gauge for controlling wafer thickness during processing (interferometry technology)

Our company will be exhibiting at "MECT 2025," which will be held at Port Messe Nagoya from Wednesday, October 22, 2025, to Saturday, October 25, 2025 (Hall 3, Booth No.: 3D49). The theme of this exhibition is "Measurement technology that expands in response to change," and we will present cutting-edge solutions for quality control in industrial measurement and process control, tool diagnostics, and machine tool applications. Exhibited products: - Non-contact laser system for tool measurement ML3G (new product) - Non-contact tool measurement device VTS equipped with a CCD camera for tool surface wear inspection (new product) - Grinding machine solution: OTX (ST balancer head + BLU series) (new product) - Machine, tool, and process monitoring system ARTIS for machine tools - NVH gear analysis device NVG-EAR, among others Please note that entry to this exhibition is free with prior registration. Please complete your registration via the link below, print your entry pass, and bring it to the venue. We sincerely look forward to seeing you at our booth.

Our company will be exhibiting at "JIMTOF 2024," which will be held at Tokyo Big Sight from November 5 (Tuesday) to November 10 (Sunday) for six days. (Booth number: E7107, East Hall 7) The theme of this exhibition is "Inspection/Measurement Equipment for the Era of e-Mobility," and we will showcase the latest technologies categorized into two zones: the latest applications for the machine tool industry and inspection/measurement in EVs. Scheduled products for display: - Single cable machine network system for grinding machines - Machine, tool, and process monitoring systems - Non-contact tool measurement device with CCD camera - NVH gear analysis device - Electric motor function testing system - Single cable machine network system for grinding machines - Tool and process monitoring systems for machine tools - High-precision on-machine measurement devices - Flexible non-contact measuring instruments - Die-cast mold surface temperature monitoring system, among others We sincerely look forward to seeing you at our booth.

Our company will be exhibiting at "MECT 2023," which will be held at Port Messe Nagoya from Wednesday, October 18, 2023, to Saturday, October 21, 2023. (Booth number: 3A09) At this exhibition, we will broadly introduce the latest applications for machine tools and the latest measurement and inspection technologies that ensure quality and process management throughout the entire EV production cycle, including products that will be exhibited for the first time in Japan. Exhibited products: - NVH gear analysis device (first exhibition in Japan) - Array-type ultrasonic sensor weight measurement system (first exhibition in Japan) - Grinding machine wheel balancing system - Tool and process monitoring systems for machine tools - High-precision on-machine measurement devices - Flexible non-contact measurement - Benchtop laser micrometer - Infrared thermal vision system for die-casting molds, among others Please note that prior registration is required for entry to this exhibition, and an admission ticket is mandatory. Please complete your registration via the link below, print your admission ticket, and bring it to the venue. We sincerely look forward to seeing you at our booth.

Our company will be exhibiting at "JIMTOF 2022," which will be held at Tokyo Big Sight from November 8 (Tuesday) to November 13 (Sunday) for six days. (Booth number: E7119, East Hall 7) The theme of this exhibition is "Evolving Marpos," and we will categorize our demonstrations into three zones: the Marpos Digital Platform, applications for the machine tool industry, and inspection/measurement in EVs. Products scheduled for display: - Marpos Digital Platform (first exhibition in Japan) - Modular Sensor Network (first exhibition in Japan) - 3D Precision Measurement/Inspection Solutions (first exhibition in Japan) - Laser System for Gear Inspection (first exhibition in Japan, reference exhibit) - Electric Motor Function Test System - Single Cable Machine Network System for Grinding Machines - Tool and Process Monitoring System for Machine Tools - High-Precision On-Machine Measurement Device - Flexible Non-Contact Measuring Device - Die-Casting Mold Surface Temperature Monitoring System - Benchtop Laser Micrometer, among others We sincerely look forward to seeing you at our booth.

We are introducing the small non-contact measuring device OPTOFLASH at our magazine exhibition. It measures dimensions of electric motor shafts, electronic connectors, hydraulic circuit components, screws, bolts, and more, with high precision in just a few seconds without contact. Please check the article for more details.

Our company will be exhibiting at "Medtec Japan," which will be held at Tokyo Big Sight starting from Wednesday, April 19, 2023. (Booth number: 3305) At this exhibition, we will primarily showcase leak testers and various non-contact measuring devices. We support the improvement of manufacturing and production processes for medical devices and medical supplies, which require safety, high functionality, and performance guarantees. We invite you to visit our booth and take a look at our offerings. Exhibited products: - Air leak testers for various medical devices - Solvent application systems for disposable products - Inner and outer diameter thickness measurement bench (for transparent molded products) - Laser-based outer diameter measuring device - Image measuring instruments for implants and small precision parts, etc.

A new function for measuring tool surface wear has been added to the non-contact image analysis tool setter VTS. We propose this to customers aiming for automation in tool measurement and those struggling with tool condition management that has relied on manual handling due to the difficulty of on-machine measurement. Please take a look at the article.

Thank you very much for your continued support. We, at Marpos Co., Ltd., will be closed during the following period: Closure Period: From Saturday, December 27, 2025, to Sunday, January 4, 2026. Inquiries received during the closure period will be answered sequentially after the start of business in the new year. We apologize for any inconvenience this may cause and appreciate your understanding. Sincerely,

We will hold an online seminar as follows. The perception of companies regarding the introduction of monitoring systems is changing. We will explain the monitoring systems for machine tools that are currently needed, using various case studies to discuss the changes in the industry environment, what challenges customers perceive, and their expectations for monitoring systems, as well as the effects of their implementation. You will understand specific approaches to introducing monitoring systems in your company. Date and Time: June 25, 2025 (Wednesday) 14:00 - 15:00 Instructor: ARTIS Monitoring System Department, Sales Development Division, Marpos Co., Ltd. Target Audience: - Customers considering the introduction of monitoring systems who want to know the specific process leading to implementation - Customers interested in what challenges other companies have identified and how they reached the introduction of monitoring systems - Customers researching the latest trends in monitoring systems for machine tools We sincerely look forward to your participation.

We will hold an online seminar as follows. This seminar is designed to alleviate concerns before system implementation. We often receive inquiries from companies wanting to know specifically what arrangements and actions they should take to prepare for system implementation. Based on successful case studies from companies that Marpos has supported, we will explain the specific steps, what decisions to make in advance, and key points for system selection, providing a concrete to-do list for implementation. In this seminar, you will be able to create a specific plan for implementing a monitoring system. Date and Time: August 28, 2025 (Thursday) 14:00 - 15:00 Instructor: Monitoring System Representative, ARTIS (Marpos Inc. Sales Development Department) Target Audience: - Customers considering the implementation of a monitoring system - Customers who want to know the specific process leading up to implementation - Customers who have already implemented a monitoring system but want to gather more information to ensure it is being used correctly We sincerely look forward to your participation.

We propose to customers aiming for the automation of tool measurement and those who have concerns about tool condition management that has relied on manual labor due to the difficulty of on-board measurement. Please take a look at the article.

In recent years, there has been an increasing demand for fine parts and high-precision components such as separators for fuel cells, precision medical devices, and semiconductor-related products, making the accuracy of mold micro-processing more important. To efficiently maintain this high precision, a non-contact imaging camera tool setter is used to monitor the condition of the tool's cutting edge on-site. Please check the article for more details.

We will hold an online seminar as follows. In recent years, there has been an increasing demand for fine parts and high-precision components, such as separators for fuel cells, precision medical devices, and semiconductor-related items, making the precision of mold micro-machining crucial. To efficiently maintain this high precision, a non-contact imaging camera tool setter that monitors the condition of the tool's cutting edge on the machine is used. Many users choose the "Non-contact Imaging Camera Tool Setter VTS" instead of a tool measurement device for three reasons. In this seminar, we will not only cover these three points but also introduce the measurement concepts and history, as well as measurements unique to VTS that are difficult with laser tool setters. We sincerely look forward to your participation. Date and Time: February 8, 2023 (Wednesday) 14:00 - 15:00 Instructor: Product Manager, Sales Engineering Department, Marpos Co., Ltd. Target Audience: 1. Customers who require higher precision, such as those using small-diameter tools. 2. Customers interested in automation through the measurement and monitoring of fine tools. 3. Customers seeking cost reduction and improved operating time through full automation. How to Register: Please register via the details and registration button.

Thank you very much for your continued support. At Marpos Co., Ltd., we will be taking our summer vacation on the following schedule. Vacation period: From Saturday, August 9, 2025, to Sunday, August 17, 2025. Inquiries received during the vacation period will be answered sequentially starting from Monday, August 18. We apologize for any inconvenience this may cause our customers and appreciate your understanding.

Our company will exhibit at "SEMICON JAPAN 2024," which will be held at Tokyo Big Sight starting December 11, 2024 (Booth number: 2705). At this exhibition, we will introduce semiconductor industry-specific applications and non-contact measuring instruments that contribute to the reliability of the ever-evolving semiconductor manufacturing process and the improvement of semiconductor performance. We cordially invite you to visit our booth and take a look at our offerings. Exhibited products: - Non-contact thickness measurement gauge (interferometry technology) - Contact/non-contact (confocal technology) hybrid applications - Optical 3D surface roughness and shape measuring instruments - High-end 3D surface measurement for probe card inspection - Visual blade inspection system for dicing processes

We will hold an online seminar as follows. Do you have challenges in quality control of uniform sheet materials and films? Manufacturing uniform sheet materials and films while controlling thickness and weight faces challenges in terms of automation of the production line and management and introduction of measurement equipment. In this seminar, we will propose a new measurement method using ultrasound for film weight measurement, along with measurement principles and case studies, to help solve these challenges. Let's transition testing to inline and achieve improved work efficiency. We sincerely look forward to your participation. Date and Time: June 4, 2025 (Wednesday) 14:00 - 15:00 Instructor: MeSys Product Specialist, Sales Development Department, Marpos Co., Ltd. Target Audience: - Customers involved in the manufacturing and research of films and sheet materials - Customers facing challenges (work hours, regulations, etc.) in manufacturing films and sheet materials using existing technologies - Those investigating and researching new technologies to replace existing ones - Customers applying coatings to films and sheets Registration: Please register via the details and registration button.

Quality control in the manufacturing process of films and sheet materials is generally conducted through non-contact inspection or off-line sampling inspection, as contact measurement for thickness measurement is difficult due to the high-speed roll transport. The MeSys UNISENSE/MULTISENSE series does not require complicated management because it uses ultrasonic technology. Please check the article for more details.

Thank you very much for your continued support. We, at Marpos Co., Ltd., will be closed on the following dates. Closure Period: From Saturday, April 26, 2025, to Tuesday, May 6, 2025. Inquiries received during the closure period will be answered sequentially after Wednesday, May 7. We apologize for any inconvenience this may cause and appreciate your understanding.

The demand for components that require precision, such as separators for fuel cells, precision medical devices, and semiconductor-related parts, is increasing, and the accuracy of micro-machining for molds is becoming important. Please refer to the article for details on a tool setter that can capture images of tools on board and measure the position and shape of the cutting edges of tools, which are crucial for micro-machining.

We have decided to postpone the online seminar mentioned below. We will inform you of the alternative date at a later time. ------------------- We will hold the online seminar as follows. Two months after JIMTOF, the perspective on the introduction of monitoring systems in companies is changing. We will explain the changes in the industry environment, what challenges customers perceive, their expectations for monitoring systems, and the effects of implementation, using various case studies. You will gain a clear understanding of specific approaches to introducing monitoring systems in your company. Date and Time: February 12, 2025 (Wednesday) 14:00 - 15:00 Instructor: Monitoring System Representative, ARTIS (MARPOSS Corporation Sales Development Department) Target Audience: - Customers considering the introduction of monitoring systems who want to know the specific process leading up to implementation. - Customers interested in what challenges other companies have faced and how they reached the decision to implement monitoring systems. - Customers researching the latest trends in monitoring systems for machine tools. We sincerely look forward to your participation.

Our company will be exhibiting at the "High-Performance Film Exhibition (part of High-Performance Materials Week)" held at Makuhari Messe from Tuesday, October 29 to Thursday, October 31 (Booth Number: 25-30, Hall 5). At this exhibition, we will introduce the latest measurement technologies for quality control in film production, focusing on our newest product, the "MeSys Ultrasonic Inline Weight (Basis Weight) Measurement System." We invite you to visit our booth and take a look. Exhibited Products: - Ultrasonic Inline Weight (Basis Weight) Measurement System - Optical 3D Surface Roughness and Shape Measurement Device Please register for an entry badge using the URL below, print it in color in advance, and bring it to the venue. Entry is by "pre-registration only."