0731 Installation case for quicklime silo

Using a controller equipped with 4 solenoid valves! An example of installing a blow disk in three layers.

last updated May 12, 2026

0732 Powder drum inversion feeding machine

Customer issues resolved in one go! A case achieved at minimal cost through manual operation.

last updated May 12, 2026

0733 Measures for Powder Bridging in Secondary Battery Materials

A case where two Brody Disk Minis were installed in the cone section with a height adjustment, totaling four units, with a hopper dimension of Ø300!

last updated May 18, 2026

0734 Installed in the material hopper of the injection molding machine.

A case that solved the problem of poor material biting into the screw, leading to unstable molding!

last updated Jun 16, 2026

0735 Resolving fly ash blockage (steelworks)

Arrange 16 standard Brodisk units! Use a controller with 4 built-in solenoid valves for timed aeration.

last updated Jun 16, 2026

Installed in the eccentric hopper.

We will introduce an example where the issue of powder accumulation on the gently sloping side, making stable quantitative supply impossible, was easily resolved by installing a Brody disk!

last updated Aug 17, 2026

Improvement of the discharge of 0738 EVA resin sheet (whisker-shaped).

We will introduce a case where the issue of poor hopper discharge of sticky EVA resin sheets was resolved through equipment test lending and installation on actual machines!

last updated Aug 17, 2026

0739 The dust collector hopper has a slight incline causing a bridge to form... solution example.

We will introduce a case where the bridging caused by the reduced slope of the dust collector's hopper was resolved by the introduction of a blow disk!

last updated Aug 17, 2026