Elimination of resin fine powder residue in the half-moon shaped hopper.

An example of installing a Brody disk to solve the problem of raw materials remaining on the hopper wall.

last updated Oct 04, 2024

At the intermediate processing plant for industrial waste

An example of installing a blow disk to solve the problem of not being able to discharge from the raw material hopper.

last updated Oct 04, 2024

Troubleshooting in the cast iron sand hopper

An example of installing a blow disk as a bridge countermeasure in a conveyor hopper for foundry sand.

last updated Oct 04, 2024

Case adopted for the waste treatment plant.

Introduction of cases where Brodisk has been adopted by waste treatment plants.

last updated Oct 04, 2024

0385 Prevention of bridge formation in carbon micro powder

An example of using a blow disk for bridge prevention in the storage hopper located above the drum filling machine.

last updated Oct 04, 2024

0386 Bridge measures for food powders

An example of installation to eliminate the bridge of a screw conveyor.

last updated Oct 04, 2024

Installation of iron oxide hopper scale 0387

An example of installing a brodie disk to solve a problem with a bridge that occurred in the hopper section.

last updated Oct 04, 2024

0388 Attached to the raw material hopper of the vacuum conveyor.

A blow disk is installed here as a countermeasure against clogging due to the small discharge diameter of the lower part of the transfer hopper.

last updated Oct 04, 2024

0389 Resolution of rat holes in resin recycling fine powder

A case of adopting the Brody Disk Mini to eliminate rat holes in micro-powdered products.

last updated Oct 04, 2024

Measures to address concerns regarding the bridge due to changes in medication.

An example of implementation to address bridge concerns due to changes in medication.

last updated Oct 04, 2024

Improvement of poor outflow of collagen powder.

An example of using a Brody disk for addressing bridging and rat hole issues in poorly flowing powders.

last updated Oct 04, 2024

0392 Solving rat holes in acrylic resin powder

An example of installing a blow disk to solve the rat hole in the supply hopper of the extruder.

last updated Oct 04, 2024

0393 Cement silo discharge section

A case where this Brody disk was introduced due to concerns about blockages in the discharge section of the cement silo.

last updated Oct 04, 2024

0394 Biomass-related: Measures for bridging rice husks

Case of adopting a brodie disk for bridge measures against rice husks.

last updated Oct 04, 2024

0395 For nitrogen purging to prevent oxidation of granular fuel

A case where a blow disc was installed at the bottom of a cylindrical tank.

last updated Oct 04, 2024

Resolving the bridge of resin powder (water-added)

An example of installing a Brody disk to solve the problem of the bridge phenomenon occurring when water is added to resin powder.

last updated Oct 04, 2024

0397 Prevention of bridge formation of dust containing glass fibers

Prevention of dust containing glass fibers! An example of applying a blow disk to the hopper section of a dust collector.

last updated Oct 04, 2024

0398 Preventing clogging of ceramic powder

Prevention of ceramic powder clogging! A case of delivering the Brody Disk Mini.

last updated Oct 04, 2024

0399 Air aeration of fly ash storage tank

Aeration for fly ash storage tanks at waste treatment plants! Case study of using blow discs.

last updated Oct 04, 2024

0400 Bridge measures at the extruder hopper

An example of adopting a blow disk as a countermeasure for bridging of crushed material in the hopper of an extruder.

last updated Oct 04, 2024

0710 Resolving powder clogging in the flexible container receiving tank

A case where we provided recommendations for models and layouts, along with their costs, based on hopper drawings and powder samples.

last updated Jun 17, 2025

0712 Elimination of bridge and rat holes in talc + additives.

Introducing a solution for rat holes occurring at the bridge of the Φ800 hopper and its lower reducer!

last updated Jul 14, 2025

Elimination of residual resin powder and resin chips in the suction transport hopper.

Introducing a case study on the installation of a hopper for the suction transport of resin chips and resin powder!

last updated Jul 14, 2025

Installed in the 0715 PVC micro powder hopper.

Installed a blow disk mini for the Ø300 hopper and a blow disk for the Ø800 hopper!

last updated Aug 06, 2025