0448 In the input hopper for fluororesin (recycled)

We lent out a blow disk for a case where the items in the input hopper got jammed!

last updated Oct 04, 2024

0447 Promoting the discharge of dihydrate gypsum powder

We recommended the BD-20 type, which has a larger air volume compared to the standard broad disk, and you adopted it!

last updated Oct 04, 2024

0446 Incineration equipment, bridge measures for chemical silos

This is an example of introducing a Brody disk as a bridge solution at the bottom of a conical silo.

last updated Oct 04, 2024

0445 The fiber powder bridge has been eliminated in one go.

A case where a bridge occurred and multiple vibrators were installed, but it became even tighter, has been resolved!

last updated Oct 04, 2024

0435 Quantitative supply of special activated carbon powder

Adopted at a factory that manufactures activated carbon products! We will introduce examples using the Brody disk.

last updated Oct 04, 2024

0436 Measures for blocking recycled sand at the foundry.

Preventing blocking issues before they occur! Here are examples of measures taken to address blocking in recycled sand.

last updated Oct 04, 2024

0437 Ash from the clean center renovation work

There are many applications for silos heated by heaters! They are highly durable and can be used in high-temperature areas.

last updated Oct 04, 2024

0438 Bridge measures for the baking soda silo

We can also provide a draft of arrangements and operating methods tailored to the diverse conditions of our users!

last updated Oct 04, 2024

0439 Attached to vehicle-mounted bag filter

Easily suppress bridges with the combined effect of aeration and the vibration of rubber discs!

last updated Oct 04, 2024

Installed in the dust collector hopper for incineration ash.

Easily solve the bridge! You can use it with peace of mind without worrying about deformation of the hopper or damage to the welds.

last updated Oct 04, 2024

0441 Assigned to the feed plant

Suppressing bridge phenomena and clogging! We can also provide test footage conducted on very poorly flowing fine powders.

last updated Oct 04, 2024

Mounting on the hopper of the metal detector.

The hopper dimensions are approximately 200×200! Here is an example of installation on a metal detector's hopper.

last updated Oct 04, 2024

0443 Resolving the bridge of carbon-containing dust

We are providing information about the installation locations and control examples of the Brodisk according to the customer's requirements!

last updated Oct 04, 2024

Elimination of the bridge in the resin and filler mixture.

Easily solve blips and rat holes with air injection into the hopper and the vibration of the silicone disk!

last updated Oct 04, 2024

0425 Solving the bridge for sawdust (fuel)

This is an example of installing a Brody disk to address the issue of poor discharge of sawdust.

last updated Oct 04, 2024

0426 Compatible with fluorine rubber blow discs mini.

In applicable devices, all silicone is not usable! We have adopted a fluororubber blow disk mini.

last updated Oct 04, 2024

0427 Resolving accumulation in the incineration ash hopper

Air injection and vibration along the hopper's inner surface are effective! A brodie disk has been installed to eliminate the accumulation occurring at the gently sloped corners.

last updated Oct 04, 2024

0428 In the zeolite rat hole

To improve the rat hole phenomenon! One standard Brody disk has been installed on each side.

last updated Oct 04, 2024

0429 Promote the discharge of fly ash

We have adopted a blow disk to improve the emission defects occurring on the fly ash side!

last updated Oct 04, 2024

0430 Improve funnel flow

Introducing a Brody disk for funnel flow improvement! We will also provide information on operating methods tailored to the user's conditions.

last updated Oct 04, 2024

0431 Recycled resin material (sheet crushed product)

Even if you set up multiple units, the costs are limited! If you provide the hopper diagram and information about the contents, we will guide you with a reasonable layout plan and operating sequence.

last updated Oct 04, 2024

0432 Measures against rat holes in waste gypsum powder

Introducing a case where "BD-20," which has a high air volume, was adopted to address issues with the waste gypsum powder silo!

last updated Oct 04, 2024

Installed in the hopper for elastomer grinding material.

Introducing the Brody Disk Mini to address supply issues with the hopper dryer! We will provide advice on placement and other matters.

last updated Oct 04, 2024

0434 was introduced at the refinery.

Adoption after testing introduction to small storage tanks! It is aimed at materials with soil-like fluidity.

last updated Oct 04, 2024

0424 Spray drying - Bridge prevention for powdered products

The subject matter is the powdered product after spray drying of a certain compound! Examples of use for bridging and residual measures.

last updated Oct 04, 2024

Measures for the dust collector hopper for the grinding machine.

After actually seeing it, you judged, "This should work." We have implemented it.

last updated Oct 04, 2024

0422 Poor discharge from bulk container

We have decided to adopt it for all containers used in truck transportation!

last updated Oct 04, 2024

0421 Bridge measures for iron powder

Installing the Brodisk is easy! Especially with a small hopper, you can easily conduct tests.

last updated Oct 04, 2024

0420 Bridge measures for alumina powder

We recommend changing the height of the Brodisk Mini and installing two units, which you have adopted.

last updated Oct 04, 2024

0419 Resolving blockages of crushed material + virgin raw materials

We have been evaluated as having resolved the issue of clogging, and you have adopted our equipment.

last updated Oct 04, 2024