0418 Measures for rice flour bridge

The controller, which has 4 built-in solenoid valves, sequentially turns on the air for the blow discs two at a time with a time delay!

last updated Oct 04, 2024

0417 Bridge Measures for Powder Coatings

If you are having trouble with bridges or rat holes, please try this device!

last updated Oct 04, 2024

0416 Measures to prevent blockage in the transport hopper for health food powder.

Air injection along the inner surface of the hopper from around the silicon disk to eliminate powder bridging and blockages.

last updated Oct 04, 2024

0415 Resolving blockages of lime-based stabilizers

Two Brodisks facing each other, divided into three locations, turned ON sequentially with a time difference! The blockage has been resolved.

last updated Oct 04, 2024

Preventing bridges caused by the influence of the butterfly valve.

The target material is resin powder! It has been adopted to prevent bridging caused by the opening and closing of the butterfly valve at the discharge section.

last updated Oct 04, 2024

0413 Measures against the adhesion bridge of waste gypsum powder and calcium carbonate.

Solving the frequent issues with bridges! We will introduce case studies from our recycling-related customers.

last updated Oct 04, 2024

0412 Measures to Prevent Clogging of Tapioca Flour

The result is OK! This is a project that adopted the load disk (mini) and controller.

last updated Oct 04, 2024

0410 Installed in the storage chute section for cement and fly ash.

Simultaneously generates vibrations from the silicone disc during aeration! This is a project adopted for measuring equipment.

last updated Oct 04, 2024

0409 Using a fertilizer mixing scale

We recommend testing by borrowing the equipment, and you were able to confirm its effectiveness!

last updated Oct 04, 2024

0408 Bridge measures using cement and silica fume

After guiding the engineering company on the placement of the broad disk, it was implemented! The results are, of course, favorable.

last updated Oct 04, 2024

0407 Measures to Address Clogged Wet Urethane Powder

The results were good, so we introduced the items we lent out as they were! This is a case for a recycling factory.

last updated Oct 04, 2024

0406 Elimination of residual silica-based powder

This is an introduction to a case that was implemented due to an incident where the processed material remained on the R surface of the rounded hopper.

last updated Oct 04, 2024

0405 No knockers and aeration issues, solved with this equipment!

Not only in this case, but most users are improving powder discharge using this device alone!

last updated Oct 04, 2024

0404 Measures against rat holes in catalyst raw materials

A case where Brodisk was adopted repeatedly for the expansion of the line.

last updated Oct 04, 2024

0403 Bridge measures for crushed resin tube products

Case study of adopting Brody Disk Mini for bridge measures in resin tube crushing products.

last updated Oct 04, 2024

0402 First, visit our company for your loan request (resin recycled material).

Frequent bridge failures occur, so I want to resolve this as soon as possible! Case study of Brodisk Mini adoption.

last updated Oct 04, 2024

0401 Improvement measures for existing users (calcium hydroxide)

After the implementation of the improvement measures, we have received feedback that there are no longer any rat holes at all!

last updated Oct 04, 2024

0400 Bridge measures at the extruder hopper

An example of adopting a blow disk as a countermeasure for bridging of crushed material in the hopper of an extruder.

last updated Oct 04, 2024

0399 Air aeration of fly ash storage tank

Aeration for fly ash storage tanks at waste treatment plants! Case study of using blow discs.

last updated Oct 04, 2024

0398 Preventing clogging of ceramic powder

Prevention of ceramic powder clogging! A case of delivering the Brody Disk Mini.

last updated Oct 04, 2024

0397 Prevention of bridge formation of dust containing glass fibers

Prevention of dust containing glass fibers! An example of applying a blow disk to the hopper section of a dust collector.

last updated Oct 04, 2024

Resolving the bridge of resin powder (water-added)

An example of installing a Brody disk to solve the problem of the bridge phenomenon occurring when water is added to resin powder.

last updated Oct 04, 2024

0395 For nitrogen purging to prevent oxidation of granular fuel

A case where a blow disc was installed at the bottom of a cylindrical tank.

last updated Oct 04, 2024

0394 Biomass-related: Measures for bridging rice husks

Case of adopting a brodie disk for bridge measures against rice husks.

last updated Oct 04, 2024

0393 Cement silo discharge section

A case where this Brody disk was introduced due to concerns about blockages in the discharge section of the cement silo.

last updated Oct 04, 2024

0392 Solving rat holes in acrylic resin powder

An example of installing a blow disk to solve the rat hole in the supply hopper of the extruder.

last updated Oct 04, 2024

Improvement of poor outflow of collagen powder.

An example of using a Brody disk for addressing bridging and rat hole issues in poorly flowing powders.

last updated Oct 04, 2024

Measures to address concerns regarding the bridge due to changes in medication.

An example of implementation to address bridge concerns due to changes in medication.

last updated Oct 04, 2024

0389 Resolution of rat holes in resin recycling fine powder

A case of adopting the Brody Disk Mini to eliminate rat holes in micro-powdered products.

last updated Oct 04, 2024

0388 Attached to the raw material hopper of the vacuum conveyor.

A blow disk is installed here as a countermeasure against clogging due to the small discharge diameter of the lower part of the transfer hopper.

last updated Oct 04, 2024