0406 Elimination of residual silica-based powder

This is an introduction to a case that was implemented due to an incident where the processed material remained on the R surface of the rounded hopper.

last updated May 12, 2026

0405 No knockers and aeration issues, solved with this equipment!

Not only in this case, but most users are improving powder discharge using this device alone!

last updated May 12, 2026

0404 Measures against rat holes in catalyst raw materials

A case where Brodisk was adopted repeatedly for the expansion of the line.

last updated May 12, 2026

0403 Bridge measures for crushed resin tube products

Case study of adopting Brody Disk Mini for bridge measures in resin tube crushing products.

last updated May 12, 2026

0402 First, visit our company for your loan request (resin recycled material).

Frequent bridge failures occur, so I want to resolve this as soon as possible! Case study of Brodisk Mini adoption.

last updated May 12, 2026

0401 Improvement measures for existing users (calcium hydroxide)

After the implementation of the improvement measures, we have received feedback that there are no longer any rat holes at all!

last updated May 12, 2026

0400 Bridge measures at the extruder hopper

An example of adopting a blow disk as a countermeasure for bridging of crushed material in the hopper of an extruder.

last updated May 12, 2026

0399 Air aeration of fly ash storage tank

Aeration for fly ash storage tanks at waste treatment plants! Case study of using blow discs.

last updated May 12, 2026

0398 Preventing clogging of ceramic powder

Prevention of ceramic powder clogging! A case of delivering the Brody Disk Mini.

last updated May 12, 2026

0397 Prevention of bridge formation of dust containing glass fibers

Prevention of dust containing glass fibers! An example of applying a blow disk to the hopper section of a dust collector.

last updated May 12, 2026

Resolving the bridge of resin powder (water-added)

An example of installing a Brody disk to solve the problem of the bridge phenomenon occurring when water is added to resin powder.

last updated May 12, 2026

0395 For nitrogen purging to prevent oxidation of granular fuel

A case where a blow disc was installed at the bottom of a cylindrical tank.

last updated May 12, 2026

0394 Biomass-related: Measures for bridging rice husks

Case of adopting a brodie disk for bridge measures against rice husks.

last updated May 12, 2026

0393 Cement silo discharge section

A case where this Brody disk was introduced due to concerns about blockages in the discharge section of the cement silo.

last updated May 12, 2026

0392 Solving rat holes in acrylic resin powder

An example of installing a blow disk to solve the rat hole in the supply hopper of the extruder.

last updated May 12, 2026

Improvement of poor outflow of collagen powder.

An example of using a Brody disk for addressing bridging and rat hole issues in poorly flowing powders.

last updated May 12, 2026

Measures to address concerns regarding the bridge due to changes in medication.

An example of implementation to address bridge concerns due to changes in medication.

last updated May 12, 2026

0389 Resolution of rat holes in resin recycling fine powder

A case of adopting the Brody Disk Mini to eliminate rat holes in micro-powdered products.

last updated May 12, 2026

0388 Attached to the raw material hopper of the vacuum conveyor.

A blow disk is installed here as a countermeasure against clogging due to the small discharge diameter of the lower part of the transfer hopper.

last updated May 12, 2026

Installation of iron oxide hopper scale 0387

An example of installing a brodie disk to solve a problem with a bridge that occurred in the hopper section.

last updated May 12, 2026

0386 Bridge measures for food powders

An example of installation to eliminate the bridge of a screw conveyor.

last updated May 12, 2026

0385 Prevention of bridge formation in carbon micro powder

An example of using a blow disk for bridge prevention in the storage hopper located above the drum filling machine.

last updated May 12, 2026

Case adopted for the waste treatment plant.

Introduction of cases where Brodisk has been adopted by waste treatment plants.

last updated May 12, 2026

Troubleshooting in the cast iron sand hopper

An example of installing a blow disk as a bridge countermeasure in a conveyor hopper for foundry sand.

last updated May 12, 2026

At the intermediate processing plant for industrial waste

An example of installing a blow disk to solve the problem of not being able to discharge from the raw material hopper.

last updated May 12, 2026

Elimination of resin fine powder residue in the half-moon shaped hopper.

An example of installing a Brody disk to solve the problem of raw materials remaining on the hopper wall.

last updated May 12, 2026

Installation of the bridge breaker on the 0380 FRP hopper.

Individual support is also available regarding the materials of elastic disks and shafts!

last updated May 12, 2026

0379 Prevention of adhesion of heavy calcium carbonate

As a measure to prevent the adhesion and growth of heavy calcium carbonate inside the chute, a brodie disk is installed.

last updated May 12, 2026

0378 Installed in the wood powder supply machine hopper.

We will introduce a case where a blow disk was installed to resolve the issue of poor wood powder discharge from the hopper.

last updated May 12, 2026

0377 Prevent clogging of wet paddy rice.

We will introduce a case where a blow disc was installed as a countermeasure for clogging at the elevator entrance hopper.

last updated May 12, 2026