[Analysis Case] Component Analysis of Aluminum Foil Surface

Evaluate the difference between glossy surfaces and matte surfaces.

last updated Apr 02, 2026

[Analysis Case] Residue Analysis of Cotton Swabs with Ethanol

Analysis of stains and cleaning residues that are not visible under an optical microscope is possible using TOF-SIMS.

last updated Apr 02, 2026

[Analysis Case] Evaluation of Layer Structure of Organic EL Devices

Preventing oxidation degradation during cutting processing under N2 atmosphere.

last updated Apr 02, 2026

[Analysis Case] Component Analysis of Organic EL Emission Layer

Possible to dismantle and preprocess while maintaining the atmosphere, up to the introduction of equipment.

last updated Apr 02, 2026

[Analysis Case] Evaluation of Organic EL Device Degradation

Suppressing changes due to processing through cutting under atmosphere control.

last updated Apr 02, 2026

[Analysis Case] Evaluation of the Diffusion Layer of SiCMOSFET Using SCM and SMM

You can evaluate the p/n polarity and carrier concentration distribution of the SiC device's diffusion layer.

last updated Apr 02, 2026

[Analysis Case] Evaluation of Carrier Distribution in Near-Infrared VCSEL Using SMM

We can consistently perform everything from disassembly and processing of the implemented product to measurement of the diffusion layer.

last updated Apr 02, 2026

[Analysis Case] Thermal Desorption Gas Analysis of SiN Film by TDS

It is possible to evaluate the surface-adsorbed gas on the thin film and the desorbed gas from within the film.

last updated Apr 02, 2026

[Analysis Case] Evaluation of Nickel Plating Peel-off Surface by TOF-SIMS

Investigation of the causes of coating peeling and poor adhesion through TOF-SIMS analysis.

last updated Apr 02, 2026

Differences in detected components by ionization methods ESI and APCI.

LC/MS: Liquid Chromatography-Mass Spectrometry

last updated Apr 02, 2026

[Analysis Case] Evaluation of Additives in Polymer Materials

Qualitative analysis of components by LC/MS.

last updated Apr 02, 2026

[Analysis Case] Evaluation of Additives in Polymer Materials Using Dissolution-Reprecipitation Method

Qualitative analysis of components using LC/MS and LC/MS/MS.

last updated Apr 02, 2026

[Analysis Case] Qualitative Analysis of Powder Contaminants

By combining techniques, it is possible to obtain multiple types of component information.

last updated Apr 02, 2026

[Analysis Case] Polarity Evaluation of GaN by ABF-STEM Observation

Atomic-level observation is possible with the Cs collector-equipped STEM.

last updated Apr 02, 2026

[Analysis Case] Evaluation of High Electron Mobility Transistors

Evaluation of crystal coherence and compositional distribution is possible with Cs collector attached STEM.

last updated Apr 02, 2026

[Analysis Case] Evaluation of Organic EL Devices Using MSDM

Visualizing the mass spectrum enables more accurate analysis.

last updated Apr 02, 2026

[Analysis Case] Investigation of Degradation of Solid Polymer Fuel Cell Electrolyte Membrane

Evaluation of degradation leachate components by LC/MS and IC.

last updated Apr 02, 2026

About MSDM

TOF-SIMS: Time-of-Flight Secondary Ion Mass Spectrometry

last updated Apr 02, 2026

[Analysis Case] Degradation Analysis of Organic EL Devices Using MSDM

By visualizing the mass spectrum, more accurate analysis is possible.

last updated Apr 02, 2026

[Analysis Case] Analysis of Paper Coated with Dyes and Pigments

Visualization of molecular information derived from dyes and pigments is possible using TOF-SIMS.

last updated Apr 02, 2026

Pre-treatment methods for trace element analysis on the wafer surface.

ICP-MS: Inductively Coupled Plasma Mass Spectrometry

last updated Apr 02, 2026

[Analysis Case] High-Sensitivity Analysis of Nitrogen Compounds by GC

Analysis of nitrogen compounds using GC/MS/NPD (Nitrogen Phosphorus Detector).

last updated Apr 02, 2026

[Analysis Case] Ultra-high Sensitivity Measurement of Impurities in SiC Using SIMS

Evaluates bulk concentrations at the ppb to ppt level.

last updated Apr 02, 2026

[Analysis Case] Evaluation of Impurity Concentration in Gallium Oxide Ga2O3 Films Using SIMS

It is possible to quantitatively evaluate impurity elements.

last updated Apr 02, 2026

High-precision quantitative evaluation of impurities in SiGe.

SIMS: Secondary Ion Mass Spectrometry

last updated Apr 02, 2026

[Analysis Case] Evaluation of the Condition of Foreign Matter with Surface Oxidation Film

Evaluation of aluminum hydroxide Al(OH)3 and aluminum oxide Al2O3 is possible.

last updated Apr 02, 2026

[Analysis Case] Evaluation of Composition Distribution of Tablet-Type Headache Medicine

Visualization of components in the cross-section of tablets after harsh testing and in new products.

last updated Apr 02, 2026

[Analysis Case] Evaluation of Composition Distribution in Bone Cross-Sections

Visualization of the composition distribution of mouse tibial cross-sections using TOF-SIMS.

last updated Apr 02, 2026

[Analysis Case] Visualization of the Distribution of Components in Biomaterials

We will handle everything from the preparation of biological material sections to analysis.

last updated Apr 02, 2026

[Analysis Case] Evaluation of Ingredients in Tablet-Type Headache Medicine

Comparison of ingredients between new products and those after harsh testing; estimation of the structure of unknown components.

last updated Apr 02, 2026