In a paper titled "Model Experiments on Lining Focusing on Tunnel Deformation Shapes" presented by the Railway Technical Research Institute, our high-precision 2D scanner (LDM700) was used.

In the paper titled "Management of Architectural Limit Separation for Buildings and Development of Measurement Devices," the measurement device using our company's laser distance sensor was introduced.

Our company will start renting out the high-precision laser distance meter "D-series" (for a fee) from Monday, November 2, 2020. The "D-series" is a high-precision laser distance meter that achieves high-speed measurements at 250Hz. This product complies with IP65 standards and can measure even in environments up to +60°C. Furthermore, it can connect up to 100 units simultaneously (RS422/RS485). The rental model available is the "DPE-10-500," and it can be rented for as short as one day. Our company provides comprehensive technical support, including usage instructions, implementation, control software development, and post-installation support. Please feel free to contact us if you have any questions or concerns. 【Overview】 ■ Rental start date: November 2, 2020 (Monday)～ ■ Target model: DPE-10-500 ■ Available for rental from as short as one day.

We will start renting out the high-precision laser distance meter 'D-series' (for a fee) from Monday, November 2, 2020. The 'D-series' is a high-precision laser distance meter that achieves high-speed measurement at 250Hz. This product complies with IP65 standards and can measure even in environments up to +60°C. Furthermore, it can connect up to 100 units simultaneously (RS422/RS485). The rental model is the "DPE-10-500," and it is available for rental starting from a minimum of one day. For more details, please contact us using the inquiry button below. 【Overview】 ■ Rental start date: November 2, 2020 (Monday)～ ■ Target model: DPE-10-500 ■ Available for rental from a minimum of one day

Our company will start renting out the high-precision laser distance meter 'D-series' (for a fee) from Monday, November 2, 2020. The 'D-series' is a high-precision laser distance meter that achieves a high-speed measurement of 250Hz. This product complies with IP65 standards and can measure in environments up to +60°C. Furthermore, it can connect up to 100 units simultaneously (RS422/RS485). The rental model is the "DPE-10-500," and it is available for rental for a minimum of one day. For more details, please contact us using the inquiry button below. 【Overview】 ■ Rental start date: November 2, 2020 (Monday)～ ■ Target model: DPE-10-500 ■ Available for rental from one day minimum

Our company will start renting out the digital flow meters from the "MCM series" (for a fee) from November 2, 2020 (Monday). The digital flow meters from the "MCM series" use coefficients from flow meters that have undergone Celes certification, which can be set on the counter. By selecting the measurement time, you can easily measure the flow rate by simply pressing the measurement switch. Additionally, the measurement values can be transferred to a PC for management in Excel. The rental models available are "MCM-1," "MCM-2," and "MCM-3," and rentals can be made for as short as one day. For more details, please contact us using the inquiry button below. 【Overview】 ■ Rental start date: November 2, 2020 (Monday)～ ■ Models available: MCM-1, MCM-2, MCM-3 ■ Rentals available for as short as one day.

We have started offering the rental of our architectural limit measuring devices, 'LDM200A/LDM300A', for a fee. The 'LDM200A' is a total station type measuring device that can measure architectural limits from outside the architectural limits, such as from the platform or beside the tracks. The 'LDM300A' controls the rotation position of the laser distance meter with a motor, allowing for continuous equidistant measurements for tunnel cross-section measurements. 【Applications】 ■ Architecture (Measurement of distance from platform structures) ■ Civil Engineering (Tunnel cross-section measurement) ■ Communications and Signals (Measurement of structural obstructions) ■ Power (Overhead line measurement) *For more details, please contact us or refer to the catalog materials.

We have started offering the rental of our architectural limit measuring devices, 'LDM200A/LDM300A', for a fee. The 'LDM200A' is a total station type measuring device that can measure architectural limits from outside the architectural limits, such as from a home or beside the railway. The 'LDM300A' controls the rotation position of the laser distance meter with a motor, allowing for continuous and evenly spaced measurements for tunnel cross-section measurement. Please make use of it.

Our company will be exhibiting at the 6th Railway Technology Exhibition. We invite you to visit our booth during this opportunity. 【Event Overview】 ■ Date: November 27 (Wednesday) to 29 (Friday), 2019, 10:00 AM to 5:00 PM ■ Venue: Makuhari Messe, Halls 5, 6, 7, and 8 (Our company will be exhibiting near the entrance of Hall 6) ■ Exhibition Contents - Measurement devices for construction limits from outside the construction gauge - On-rail construction gauge measurement devices - Newly developed measuring instruments - Laser distance meters from the Swiss company DIMETIX

This time, MT Precision will be exhibiting at the "11th Infrastructure Inspection and Maintenance Exhibition" held at Tokyo Big Sight from July 24, 2019, as part of Maintenance & Resilience TOKYO 2019. 【Booth Number】 ■W1T-19 【Exhibited Products】 ■High-precision, high-speed laser distance meter ■Building limit measuring device *We sincerely look forward to your visit.

This time, MT Precision will be exhibiting at the "23rd Advanced Technology and Skills Exhibition 'Ota Industrial Fair'" held at Tokyo Big Sight from January 31, 2019. [Exhibited Product] ■ High-precision Laser Distance Meter 'D-series' *We sincerely look forward to your visit.

We exhibited at "Sensor Expo Japan 2018," which was held at Tokyo Big Sight from September 26 (Wednesday) to September 28 (Friday), 2018. 【Exhibition Details】 Name: Sensor Expo Japan 2018 Dates: September 26 (Wednesday) to 28 (Friday), 2018 Time: 10:00 AM to 5:00 PM Venue: Tokyo Big Sight [Tokyo International Exhibition Center], East Hall

*MT Precision Co., Ltd. has been able to celebrate its 30th anniversary thanks to your support.* *We are currently running a gift campaign as a token of our gratitude.* MT Precision Co., Ltd. was established in 1988. This year, 2018, we are pleased to celebrate our 30th anniversary, thanks to all of you who have supported us, especially our customers. We sincerely thank you from the bottom of our hearts. We look forward to your continued support. Currently, as a token of our appreciation, we are running a gift campaign. We will give a ballpoint pen to those who contact us through our website. *Please be sure to visit our website at the URL below!*

We will be exhibiting at the "5th Railway Technology Exhibition" held at Makuhari Messe (Chiba) from November 29 (Wednesday) to December 1 (Friday), 2017. Visitors to our booth will receive a special chocolate wafer from DIMETIX! If you have any inquiries or would like an invitation, please fill out the web inquiry form.

We have revamped the content to ensure that everyone can continue to use the website comfortably. Thank you for your continued support.