Dimetix manufactured installed high-precision laser distance meter.
Dimetix manufactured installed high-precision laser distance meter.
The distance to the position where the red laser is being emitted can be measured with an accuracy of ±1mm to ±3mm. The interface with the PC includes RS-232c and RS-422, and the analog output and digital comparator output can operate without a PC.
31～46 item / All 46 items
-
Automation of existing tunnel interior displacement measurement.
The existing tunnel internal displacement measurement has been transitioned from manual methods to permanent automatic measurement using laser distance sensors. Displacement can be monitored anytime and anywhere.
last updated
-
Measuring the position and displacement of refractory bricks in the steel mill using a laser distance sensor.
The position and displacement of refractory bricks can be measured with a laser distance sensor with an accuracy of ±1mm. This allows for precise understanding of the timing for replacement, contributing to time savings and increased efficiency.
last updated
-
Measuring load sway of overhead cranes to avoid danger? Position correction with lasers.
Don't you feel the need to understand the sway of suspended loads with a ceiling crane to avoid danger? The position information is measured with a laser distance sensor.
last updated
-
Using a laser distance sensor to obtain position data to solve problems and improve productivity.
Retrofit existing cranes with laser distance sensors to digitalize crane position information, coordinate the factory, and reduce collisions and transportation time.
last updated
-
High-precision, compact, and lightweight laser distance sensor for positioning mobile viewing seats.
This is a high-precision, compact, and lightweight laser distance sensor manufactured by Dimetix, suitable for knowing the seat positions, widely used from theaters to arenas.
last updated
-
Measurement of the cross-section inside the Seikan Tunnel using Dimetix laser distance sensors.
In early December 2022, under the supervision of the Railway and Transport Agency and the Railway Technical Research Institute, a joint measurement of the cross-section of the Seikan Tunnel was conducted with JR East Engineering.
last updated
-
Over 20 years of domestic sales performance - Positioning control with laser distance sensors.
When transporting heavy objects, use a retrofitted laser distance sensor on the overhead crane to measure and control the positioning on the X/Y axis within 50-100 meters.
last updated
-
Over 20 years of domestic experience: Laser distance sensor that can be retrofitted to overhead cranes.
When transporting heavy objects, position information is measured and controlled using a retrofitted laser distance sensor on the overhead crane for positioning along the X-axis/Y-axis within 50-100 meters.
last updated
-
Domestic achievements of over 20 years in measuring the deflection of steel bridges using high-speed response laser distance sensors.
By leveraging the high response capability of the laser distance sensor (up to 250 data points per second), the health of the shoe (bearing) can be determined.
last updated
-
Over 20 years of domestic experience in measuring the deflection of steel bridges using laser distance sensors.
By using a laser distance sensor to measure the deflection of the iron bridge, the health of the shoe (bearing) can be determined.
last updated
-
Over 20 years of domestic experience in tunnel interior displacement measurement using laser distance sensors.
It is often seen that 2 to 3 laser distance sensors are used for measuring internal tunnel displacement. We highly recommend using high-precision, compact, and lightweight sensors.
last updated
-
Domestic track record of over 20 years, high precision, small and lightweight laser distance sensor.
Can measure distances up to 500m with an accuracy of ±1mm! Maximum measurement rate of 250Hz/IP65 compliant/operates in environments up to +60°C.
last updated
-
Over 20 years of domestic performance - operable at -40°C, can be installed on freezer cranes.
This is a laser distance sensor capable of data collection with an accuracy of ±1mm up to 100m in environments of -40℃ and below, with a maximum frequency of 250Hz. It can be used in freezers.
last updated
-
Management of storage that can be retrofitted to overhead cranes in the coil manufacturing site.
By retrofitting a laser distance sensor to the overhead crane, it automatically detects the position, eliminating the hassle of location input and input errors.
last updated
-
Steel mill laser distance sensor for measuring bloom thickness at high temperatures.
It is possible to measure the thickness of blooms near a high temperature of 1,000°C at the steel mill using multiple laser distance sensors in a non-contact manner.
last updated
-
The diameter of the pipe can be measured automatically using a laser distance sensor.
It is possible to automatically measure the diameter of pipes with a thickness of 150mm or more without human intervention. The length of the pipe does not matter.
last updated