Analysis case
Analysis case
This is an introduction to the case study.
31～60 item / All 66 items
-
[Analysis Case] Electromagnetic Field Analysis of Wireless Power Transfer (Electromagnetic Induction Method)
Introduction of analysis examples of wireless power transmission using electromagnetic induction method.
last updated
-
[Analysis Case] Magnetic Field Analysis of Superconductors Considering the Critical State Model
The software used is "PHOTO-EDDY"! It is also possible to analyze Kim models that depend on magnetic flux density.
last updated
-
Analysis case: Analysis of the film head
This shows an example of magnetic field analysis when current is applied to a thin film head.
last updated
-
[Analysis Case] Calculation of Electromagnetic Force in the Plunger Model
The analytical model for calculating electromagnetic force in the plunger model was a three-dimensional model.
last updated
-
[Case Study] Eddy Current Testing Using an External Field Method (Non-Destructive Testing)
We conducted an "eddy current testing" analysis to detect surface defects on the conductor plate.
last updated
-
[Analysis Case] The Effect of Magnetic Sheets for RFID Cards Using Outdoor Functionality
What changes occur in the electromotive force when a magnetic sheet is attached?
last updated
-
[Case Study] Three-Dimensional Nonlinear Static Magnetic Field Analysis of Steel Plates Using External Coils
Calculate the average magnetic flux density flowing inside the iron plate! A case study comparing and verifying the measurements of Team Problem 13.
last updated
-
[Case Study] Static Magnetic Field Analysis Without Air Mesh
Simplifying the input of current density for complex-shaped coils! Introducing a case study of "PHOTO-MAGTZ" analysis.
last updated
-
[Analysis Case] Magnetization Analysis of a Cylindrical Magnet Considering Hysteresis "Hard Magnetism"
Using 'hyperbolic function approximation'! Determine the hysteresis loop with numerical values and hyperbolic functions.
last updated
-
[Analysis Case] Magnetic Field Analysis of Concentrated Winding IPM Motor
The electromagnetic steel sheet uses a B-H curve equivalent to 35A300! The benchmark model employs a concentrated winding stator.
last updated
-
[Analysis Case] Nonlinear Static Magnetic Field Analysis of Magnetic Shielding
The analysis model is a 1/8 model based on symmetry! We will introduce analysis cases using external field coils.
last updated
-
[Case Study] Magnetic Field Simulation Considering Hysteresis
The input method is simple and user-friendly! We will also introduce examples of investigating the behavior of hysteresis in a rotating magnetic field.
last updated
-
[Analysis Case] Predicting the magnetization distribution within a plastic magnet from measurement data.
Estimating the magnetization distribution from the numerical data of magnetic flux density obtained from the forward problem! Introducing an analysis case of the inverse problem.
last updated
-
[Analysis Case] Analysis of the Actuator
The subject of analysis is the actuator.
last updated
-
[Analysis Case] Cogging Torque Analysis of Claw Pole Motors
The subject of analysis is a claw pole motor.
last updated
-
[Analysis Case] Electric Field Analysis of Overhead Transmission Lines
Confirming the electric field strength generated by overhead power lines! Introducing simulation examples through frequency response analysis.
last updated
-
[Analysis Case] Electric Field Analysis of Wound Type Capacitors
The capacitance of the cathode is theoretically determined by approximating a cylindrical capacitor as a parallel plate capacitor, and compared with the analytical results!
last updated
-
[Analysis Case] Electric Field Simulation of Capacitive Sensors
The software used is PHOTO-VOLT or VOLTjω! Move the electrodes based on the detection body for analysis.
last updated
-
[Case Study] Nonlinear Electric Field Analysis of Cable Joints
The analysis type is axisymmetric analysis using the MKSA unit system! A case study using current distribution analysis.
last updated
-
[Analysis Case] Electric Field Analysis of MEMS Electrostatic Actuators (Electrostatic Force)
Consideration of whether the order of the electrostatic force obtained as a result of the analysis is reasonable! A case study applying electric field analysis.
last updated
-
[Analysis Case] Electric Field Analysis Between Coil Wires (Discharge)
An analysis case of the electric field generated when a voltage is applied between insulated coil wires (cables).
last updated
-
[Analysis Case] Electric Field Analysis of Cylindrical Capacitor (Capacitance Calculation)
Not only VOLT, but also VOLTjω can be analyzed! Here are examples of analyses conducted under three conditions!
last updated
-
Analysis Case: Analysis of Capacitance
This shows an example of capacitance analysis through electric field analysis between the iron core and the coil.
last updated
-
[Analysis Case] Electric Field Analysis Between Electrodes
The electric field analysis between the electrodes was conducted using an axisymmetric model.
last updated
-
[Analysis Case] Thermal Conductivity Analysis of a Circular Cylinder (Comparison with Theoretical Solutions)
We will conduct thermal conduction analysis under three conditions! Here, we will introduce a case study using a circular pipe model.
last updated
-
[Analysis Case] Stress Analysis of Elastic Bodies (Frequency Response)
As an example of stress analysis, we present a stress analysis of an elastic body with a bell shape.
last updated
-
[Analysis Case] Electromechanical Coupled Analysis of Cylindrical Piezoelectric Elements
Focusing on the conversion from force to electricity! The software is PHOTO-ELAS and PHOTO-VOLT.
last updated
-
[Analysis Case] Induction Heating Analysis of IH Heaters
The positions of the magnetic core and coil are fixed! We will introduce an analysis case considering the rotation of the roller!
last updated
-
[Analysis Case] Induction Heating Analysis of Induction Furnace [Temperature Dependence of Electrical Conductivity]
The analysis type is axisymmetric analysis! A case study of magnetic field-thermal coupled analysis using temperature-dependent electrical conductivity.
last updated
-
[Analysis Case] Induction Heating Analysis of a Cylindrical Conductor
Finite element method-based magnetic field-thermal coupled analysis is effective for understanding heat distribution and temperature distribution!
last updated